Cal Posted March 30, 2015 Share Posted March 30, 2015 10mm and 20mm Hubcentric Spacers, for 19" LMGT4's. Ideally black, but if they're cheap enough I'll clean/paint them. Was looking at these http://www.ebay.co.u...=item461647c25d Quote Link to comment Share on other sites More sharing options...
Vlad Posted March 30, 2015 Share Posted March 30, 2015 Don't think you can get 10mm spacers with "built-in" studs...as i think 10mm is not thick enough to hold a stud in securely, if that makes sense? I think minimum yu can go is 15mm with built in stud... otherwise you will need replace your standard studs for a longer ones to use with 10mm spacer 1 Quote Link to comment Share on other sites More sharing options...
Cal Posted March 30, 2015 Author Share Posted March 30, 2015 Don't think you can get 10mm spacers with "built-in" studs...as i think 10mm is not thick enough to hold a stud in securely, if that makes sense? I think minimum yu can go is 15mm with built in stud... otherwise you will need replace your standard studs for a longer ones to use with 10mm spacer Bugger! Reason I thought I'd go for 10mm is that Ian Wasso has the same wheels and 15mm scrubs for him, perhaps with mine being sat higher on Eibach springs it may be ok. Old pic, but gives an idea of the clearance Quote Link to comment Share on other sites More sharing options...
mouthwash Posted March 30, 2015 Share Posted March 30, 2015 I got some 15mm in my sale thread if you fancy trying it. 1 Quote Link to comment Share on other sites More sharing options...
Cal Posted March 30, 2015 Author Share Posted March 30, 2015 I'll bare them in mind cheers mate Quote Link to comment Share on other sites More sharing options...
Wasso Posted March 30, 2015 Share Posted March 30, 2015 Eibach 20mm? Which Eibach do you have, as the ones I had went down around 27-30mm 1 Quote Link to comment Share on other sites More sharing options...
Cal Posted March 30, 2015 Author Share Posted March 30, 2015 Eibach 20mm? Which Eibach do you have, as the ones I had went down around 27-30mm I have no idea unfortunately mate, they were on the car when I bought it. Quote Link to comment Share on other sites More sharing options...
GT4 Zed Posted April 3, 2015 Share Posted April 3, 2015 I've got got 10mm hub-centric spacers with extended bolts. I can swap for preferably 20 or 25mm spacers. Because I run so much front camber it makes my current 10mm spacing off as the top of the tyre is too tucked in. Vlad's info is correct. They are easy to swap. Just need to remove the wheels and brake disc and calliper out of the way and you just tap the OEM studs out backwards through the gap in the hub and then reverse the procedure with the extended bolts. Quote Link to comment Share on other sites More sharing options...
GT4 Zed Posted April 3, 2015 Share Posted April 3, 2015 Eibach 20mm? Which Eibach do you have, as the ones I had went down around 27-30mm All eibach hubcentric spacers for the zed are in 5mm increments and product range is from 5mm to 30mm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.