ioneabee Posted March 9, 2015 Share Posted March 9, 2015 when opening from the outside it can (sometimes) be quite difficult - it opens perfectly normally from inside pulling the handle needs to be done at a specific point and angle ..... sort of and its intermittent suggestions on what might be causing it and how I can fix it 1 Quote Link to comment Share on other sites More sharing options...
taras Posted March 9, 2015 Share Posted March 9, 2015 Hi, if you aren't very far from Wembley, we'd be happy to have a look. Inspection is free of charge. Taras. Sent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
ioneabee Posted March 9, 2015 Author Share Posted March 9, 2015 Thanks at least 4 hours each way Quote Link to comment Share on other sites More sharing options...
Steel Lynx Posted March 11, 2015 Share Posted March 11, 2015 Mine also does this. All my two door cars have eventually done something similar. I put it down to the doors being that much heavier than four door car doors, I think they drop a bit over time. It might be nothing to do with that though. Just thought I'd mention it 2 Quote Link to comment Share on other sites More sharing options...
ioneabee Posted March 11, 2015 Author Share Posted March 11, 2015 hmm - worth looking at - thanks 1 Quote Link to comment Share on other sites More sharing options...
veilside z Posted March 11, 2015 Share Posted March 11, 2015 Could be the inner rod. Would need the door panel removed to check the activation is not coming adrift or catching. Quote Link to comment Share on other sites More sharing options...
zebedy Posted March 12, 2015 Share Posted March 12, 2015 lift the door from the bottom leading edge when open and see if there is up n down movement there, if so, your door is dropping. You then need to look at the hinge pins or the hinges themselves. Quote Link to comment Share on other sites More sharing options...
Robchriscross Posted March 12, 2016 Share Posted March 12, 2016 when opening from the outside it can (sometimes) be quite difficult - it opens perfectly normally from inside pulling the handle needs to be done at a specific point and angle ..... sort of and its intermittent suggestions on what might be causing it and how I can fix it Mines started doing this lately did you get it sorted? Sent from my SM-G920F using Tapatalk Quote Link to comment Share on other sites More sharing options...
ioneabee Posted March 13, 2016 Author Share Posted March 13, 2016 sadly no - though saying that it very rarely does it now - very intermittent thingy 1 Quote Link to comment Share on other sites More sharing options...
Robchriscross Posted March 13, 2016 Share Posted March 13, 2016 Had a look earlier put copper grease in the latch seems better though the door looks a few mm low Sent from my SM-G920F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.