sam350z2013 Posted August 26, 2014 Share Posted August 26, 2014 Hi all, Wondering if anyone has has similar problems when the clutch is pressed and makes a squeal like noise? (I've attached a short video). It's louder from the outside than inside and it's just bugging me. Any help/advice will be much appreciated https://vimeo.com/104433944 Many thanks, Quote Link to comment Share on other sites More sharing options...
JEMAN Posted August 26, 2014 Share Posted August 26, 2014 Mine does it.........I've been told that my one comes from inside the bell housing, so I'm not going to be doing that I'm not saying yours does, but it maybe the cause ? Quote Link to comment Share on other sites More sharing options...
JEMAN Posted August 26, 2014 Share Posted August 26, 2014 Sorry, it's a different noise to mine after listening again..........so ignore my last comment, but good luck with finding the cause Quote Link to comment Share on other sites More sharing options...
lolzz Posted August 26, 2014 Share Posted August 26, 2014 Yeah, mine does it too :S Quote Link to comment Share on other sites More sharing options...
evilscorp Posted August 26, 2014 Share Posted August 26, 2014 If it's an early model I.e. not a rev up just crawl under and grease the slave cylinder as it's on the outside of the gearbox (05/06+ have them inside) just pull the rubber sleeve back and stick some on it. Mine happens when it's wet as the water runs down my engine(carbon vents bonnet) and into the slave causing the grease to wash away and I get that horrible squeak. If that doesn't work zmanalex/clarkmotorsports will get you a new one =) 2 Quote Link to comment Share on other sites More sharing options...
GT Driver Posted August 28, 2014 Share Posted August 28, 2014 Mine does that too, similiar squeek and it's definitely coming from the gearbox area! Quote Link to comment Share on other sites More sharing options...
lolzz Posted August 28, 2014 Share Posted August 28, 2014 (edited) If it's an early model I.e. not a rev up just crawl under and grease the slave cylinder as it's on the outside of the gearbox (05/06+ have them inside) just pull the rubber sleeve back and stick some on it. Mine happens when it's wet as the water runs down my engine(carbon vents bonnet) and into the slave causing the grease to wash away and I get that horrible squeak. If that doesn't work zmanalex/clarkmotorsports will get you a new one =) So there's no quick fix for the rev-up model? Edited August 28, 2014 by lolzz Quote Link to comment Share on other sites More sharing options...
evilscorp Posted August 29, 2014 Share Posted August 29, 2014 nope i am afraid not as its built inside the bell housing I believe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.