d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 Looks awesome mate! Any chance of more pics of the big centre bit? Was it only the top bit dipped and sides just sprayed? cant see clearly on the pic Hi Vlad, The whole lot was dipped, so Top and sides are fully dipped and covered. I will do some more pics tonight and upload. Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 thanks to all the brilliant comments. I've got a long way to go yet as the previous owner had started a blue theme under the bonnet, so I now have to swap all the anodised bolts, hoses, etc.......so watch out for items going up for sale. Just fitted the engine cover and aftermarket slam panel. Again apologies for the crap pics we really dont show off the Candy Apple Red to its best: If anyone can advise on the size of hose I need to swap out the two on the intake manifold, it would be appreciated. Saves me having to strip them down and measure. Also need to order the Earthing kit from our friends at Horsham Developments. Also now realise I am going to have to purchase aftermarket smooth covers for the Battery and Fluids covers, so I can them have them dipped the same, if anyone can point me in the direction of anyone who does these in fiberglass......not worth me purchasing them in Carbon just to dip over the top. Once again thanks for all the kind comments. Graeme 3 Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted July 3, 2014 Share Posted July 3, 2014 Couldn't you just get the existing covers smoother over? Some kind of resin etc to fill in the indentations? Quote Link to comment Share on other sites More sharing options...
Ceejay29 Posted July 3, 2014 Share Posted July 3, 2014 Couldn't you just get the existing covers smoother over? Some kind of resin etc to fill in the indentations? +1 filler Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 Candy apple red just the colour I wanted! Sure the guys can sort you out with whatever you want Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 Couldn't you just get the existing covers smoother over? Some kind of resin etc to fill in the indentations? They did actually offer to do that, but to be honest, the extra its going to cost in time and effort, its probably just as easy for me to get some replacements and get them done, at least should I ever get bored or get rid, I have the option of putting everything back to OEM. Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 Once signed up be great to arrange a group Dip (steady on misus) Absolute dogs finish on em. fair play. I am emailing them tonight, so will mention the possibility of a group buy on a few of our specific items like the Engine cover, Slam panel, etc. I am keen to get the new owners on here as I know their work is spot on and nobody will be disappointed. I also travel all around the country so don't even mind meeting up with people and handing back completed parts or picking parts up.....anything to save money. Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted July 3, 2014 Share Posted July 3, 2014 Couldn't you just get the existing covers smoother over? Some kind of resin etc to fill in the indentations? They did actually offer to do that, but to be honest, the extra its going to cost in time and effort, its probably just as easy for me to get some replacements and get them done, at least should I ever get bored or get rid, I have the option of putting everything back to OEM. Fair enough I always kept my oem bits too, I meant a diy job, all you need is some filler and a plastic scraper Sent from the golf club... Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 Couldn't you just get the existing covers smoother over? Some kind of resin etc to fill in the indentations? They did actually offer to do that, but to be honest, the extra its going to cost in time and effort, its probably just as easy for me to get some replacements and get them done, at least should I ever get bored or get rid, I have the option of putting everything back to OEM. Fair enough I always kept my oem bits too, I meant a diy job, all you need is some filler and a plastic scraper Sent from the golf club... I will give that some thought, seems a lot simpler when you put it like you did .....I was over complicating......Halrauds here I come Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 Couple of the members wanted to know about the full centre console, whether it was just dipped on the top, or the whole thing. The answer is "The whole thing" was dipped, apparently took a few goes to get it right, I know most of the sides cannot be seen......But I would of known, apart from anything else, the guys themselves wouldn't of let it go out in a "half" state. Any quick vid as a walk-around of the centre console. Had to convert to low quality to keep the size down. Had to do it as a link as I am not too familiar on how to embed video into the thread. 18Mb Video walk-around of Carbon Dipped Centre Console 1 Quote Link to comment Share on other sites More sharing options...
The Seasider Posted July 3, 2014 Share Posted July 3, 2014 Oh man, that video is like porn to me. I think you have just cost me soooooo much money - I want one! Save me looking through all the posts - how much was this again? I missed the first modding wave in the early part of the century - I'm going to be right on time for this one! Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 3, 2014 Author Share Posted July 3, 2014 Once signed up be great to arrange a group Dip (steady on misus) Absolute dogs finish on em. fair play. I do know they have already contacted the "admins" about becoming traders on the forum, so hopefully won't be too long now. Quote Link to comment Share on other sites More sharing options...
Ceejay29 Posted July 3, 2014 Share Posted July 3, 2014 How durable would the centre consol be; presumably it has a number of lacquer coats? The whole lot looks amazing!! Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 4, 2014 Author Share Posted July 4, 2014 If I remember rightly, the lacquer they use is this new anti-scratch stuff that is hard wearing. Although I am still going to be conscious that I need to treat it better in order to keep it looking pristine. The other panels I have just done a couple of "HubiKote" on them. This is a sealant wax, and not only does it give an amazing gloss finish, it does add another layer of protection. I can only see how it goes over a period of time. 1 Quote Link to comment Share on other sites More sharing options...
GMballistic Posted July 4, 2014 Share Posted July 4, 2014 (edited) How durable would the centre consol be; presumably it has a number of lacquer coats? The whole lot looks amazing!! More durable than the standard Zed equipment is my bet ~ I mean look at the state of most Zed owners door pulls and cubby holes. You only have to touch it with your nail and it will mark. My dipped interior door pulls are much more resilient to marks then they ever where as standard imo. Edited July 4, 2014 by GMballistic Quote Link to comment Share on other sites More sharing options...
tatooandy67 Posted July 4, 2014 Share Posted July 4, 2014 Couple of the members wanted to know about the full centre console, whether it was just dipped on the top, or the whole thing. The answer is "The whole thing" was dipped, apparently took a few goes to get it right, I know most of the sides cannot be seen......But I would of known, apart from anything else, the guys themselves wouldn't of let it go out in a "half" state. Any quick vid as a walk-around of the centre console. Had to convert to low quality to keep the size down. Had to do it as a link as I am not too familiar on how to embed video into the thread. 18Mb Video walk-around of Carbon Dipped Centre Console That looks amazing can't wait to get my interior started (unfortunately I have to wait) Was it difficult to remove the interior trim without causing any damage (broken clips/lugs etc) Quote Link to comment Share on other sites More sharing options...
Martinjj Posted July 4, 2014 Share Posted July 4, 2014 +1 to the above question, i was toying with the idea of having the interior trims Hydro Dipped myself, after seeing these pics and comments regarding how durable the finish is im sold and it is now a deffo on my "to-do" list, providing i can get things apart without causing any high cost inducing damage. Quote Link to comment Share on other sites More sharing options...
Jay M1988 Posted July 4, 2014 Share Posted July 4, 2014 Well they look the dogs danglies lets be honest. Where abouts are you from bud I live just outside chester le street, gm 350z. Whats the name of the company? Quote Link to comment Share on other sites More sharing options...
Ceejay29 Posted July 4, 2014 Share Posted July 4, 2014 How durable would the centre consol be; presumably it has a number of lacquer coats? More durable than the standard Zed equipment is my bet My dipped interior door pulls are much more resilient to marks then they ever where as standard imo. That's good to know, cheers GM 1 Quote Link to comment Share on other sites More sharing options...
GMballistic Posted July 4, 2014 Share Posted July 4, 2014 Couple of the members wanted to know about the full centre console, whether it was just dipped on the top, or the whole thing. The answer is "The whole thing" was dipped, apparently took a few goes to get it right, I know most of the sides cannot be seen......But I would of known, apart from anything else, the guys themselves wouldn't of let it go out in a "half" state. Any quick vid as a walk-around of the centre console. Had to convert to low quality to keep the size down. Had to do it as a link as I am not too familiar on how to embed video into the thread. 18Mb Video walk-around of Carbon Dipped Centre Console That looks amazing can't wait to get my interior started (unfortunately I have to wait) Was it difficult to remove the interior trim without causing any damage (broken clips/lugs etc) +1 to the above question, i was toying with the idea of having the interior trims Hydro Dipped myself, after seeing these pics and comments regarding how durable the finish is im sold and it is now a deffo on my "to-do" list, providing i can get things apart without causing any high cost inducing damage. Guys this will help; http://liljerk.morpheus.net/350Z/dash_removal/ And this; http://liljerk.morpheus.net/350Z/front_speakers/ Very easy to disassemble. 2 Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 4, 2014 Author Share Posted July 4, 2014 Couple of the members wanted to know about the full centre console, whether it was just dipped on the top, or the whole thing. The answer is "The whole thing" was dipped, apparently took a few goes to get it right, I know most of the sides cannot be seen......But I would of known, apart from anything else, the guys themselves wouldn't of let it go out in a "half" state. Any quick vid as a walk-around of the centre console. Had to convert to low quality to keep the size down. Had to do it as a link as I am not too familiar on how to embed video into the thread. 18Mb Video walk-around of Carbon Dipped Centre Console That looks amazing can't wait to get my interior started (unfortunately I have to wait) Was it difficult to remove the interior trim without causing any damage (broken clips/lugs etc) It's actually very easy to remove it all, have a read of the guides on the forum, you can easily strip the lot in an hour. 2 Quote Link to comment Share on other sites More sharing options...
d95gas Posted July 4, 2014 Author Share Posted July 4, 2014 +1 to the above question, i was toying with the idea of having the interior trims Hydro Dipped myself, after seeing these pics and comments regarding how durable the finish is im sold and it is now a deffo on my "to-do" list, providing i can get things apart without causing any high cost inducing damage. Have a read of the pictorial guides, it really is easy, few screws and a few clips and it's out........and there is always plenty of people on the forum willing to help and advise.......you are never alone. 1 Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted July 4, 2014 Share Posted July 4, 2014 Yep very easy to strip a Zed interior, just get a proper set of trim removal tools (best £7 you will spend) and feel your way around. If the car is cold then put the heating on for a bit so it isn't so brittle Sent from the golf club... 2 Quote Link to comment Share on other sites More sharing options...
tatooandy67 Posted July 4, 2014 Share Posted July 4, 2014 ^^^ sweet Thanks for the tips guys Quote Link to comment Share on other sites More sharing options...
GMballistic Posted July 4, 2014 Share Posted July 4, 2014 Yep very easy to strip a Zed interior, just get a proper set of trim removal tools (best £7 you will spend) and feel your way around. If the car is cold then put the heating on for a bit so it isn't so brittle Sent from the golf club... I got these from eBay a while ago; http://www.ebay.co.uk/itm/4-PCS-New-Style-Universal-Automotive-Car-Panel-Trim-Audio-Remover-Tools-/251560871829?pt=UK_Hand_Tools_Equipment&hash=item3a92324795 They where £1.50 for the set but still cheap as chips at £2.29. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.