clark354uk Posted August 17, 2007 Share Posted August 17, 2007 Hi, Does anybody know how easy or difficult it is to replace the front bumper on a Zed? Is this something that I would have to get done at a body shop or, could I do it myself? Thanks in advance for your reply. Clark Quote Link to comment Share on other sites More sharing options...
GC350z Posted August 17, 2007 Share Posted August 17, 2007 Try this: http://www.350z-uk.com/forum/viewtopic.php?t=4536 Didn't read it but looks good. Quote Link to comment Share on other sites More sharing options...
Tere Posted August 18, 2007 Share Posted August 18, 2007 Remove 10mm bolts on bottom edge. Pop the front edge of the wheel well lining out from behind the fascia lip up to the fender seam -- you'll do the following on both sides. Use a 10mm socket on an 18" extension, run it up vertically between the front fascia and wheel lining. You'll see two machine screws -- remove both. On the lower part of the fascia bracket you'll see (or feel) a bolt. It's just inboard and below the two screws (the fascia bracket is bent down) -- remove the bolt. Pop the six plastic fasteners on the top -- pop center part up about half way and the fastener will come out very easily. You're done! Pull the fascia off! This takes me about 10 minutes to do. To reinstall, just do the steps in reverse. Quote Link to comment Share on other sites More sharing options...
Beavis Posted August 18, 2007 Share Posted August 18, 2007 Moved Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.