Arran Posted May 21, 2014 Share Posted May 21, 2014 I have both of these two with orange stitching, haven't fitted the handbrake one though so I will now give it a go Quote Link to comment Share on other sites More sharing options...
ph 7 Posted May 21, 2014 Share Posted May 21, 2014 I really like those.....browsing shop now. Hmmmm also available in blue stitch. Might not be able to resist it, or the seat belt fastener shrouds. Those sunvisor covers are perfect for anyone planning to dye the roof lining black Quote Link to comment Share on other sites More sharing options...
Brayster Posted May 21, 2014 Share Posted May 21, 2014 Nice - I saw these when looking for 370z one .Is 370-350 gaiter that much different? The 370z one in £30 for the gear stick gaiter alone! Quote Link to comment Share on other sites More sharing options...
ph 7 Posted May 21, 2014 Share Posted May 21, 2014 I'll swap you my 350 for your 370 if you want cheaper parts Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted May 23, 2014 Share Posted May 23, 2014 Mine are in 1 Quote Link to comment Share on other sites More sharing options...
-Bradders- Posted May 23, 2014 Share Posted May 23, 2014 Got mine today! 1 Quote Link to comment Share on other sites More sharing options...
Toothy Posted May 24, 2014 Author Share Posted May 24, 2014 Looking good Bullet Quote Link to comment Share on other sites More sharing options...
chirag1988 Posted June 5, 2014 Share Posted June 5, 2014 Got half my handbrake gaitor on so far lol. Been at it with an old store card to prevent scratching the surrounds. Hoping to finish off the set this weekend! Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted June 5, 2014 Share Posted June 5, 2014 Got half my handbrake gaitor on so far lol. Been at it with an old store card to prevent scratching the surrounds. Hoping to finish off the set this weekend! You do know that the rubber surround around the handbrake lever is removable. undo it, feed gaitor thru, then use a flat plastic thing (like a ruler) and tuck it all away, then refit the rubber Quote Link to comment Share on other sites More sharing options...
chirag1988 Posted June 5, 2014 Share Posted June 5, 2014 Got half my handbrake gaitor on so far lol. Been at it with an old store card to prevent scratching the surrounds. Hoping to finish off the set this weekend! You do know that the rubber surround around the handbrake lever is removable. undo it, feed gaitor thru, then use a flat plastic thing (like a ruler) and tuck it all away, then refit the rubber Will it go back nice and flush as before? Just worried about ripping it when taking it off...are there any "weak spots" on it I should be aware of? Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted June 6, 2014 Share Posted June 6, 2014 it has locating tabs Quote Link to comment Share on other sites More sharing options...
telboy83 Posted June 18, 2014 Share Posted June 18, 2014 I ordered a set but none of the holes matched up,there to far away and the old gaitor has square bits to the surround also,have I ordered the wrong one I did but the set for a 2004,is there a guide? Quote Link to comment Share on other sites More sharing options...
Floydbax Posted June 18, 2014 Share Posted June 18, 2014 Just a head's-up, I have the armrest covers in the same colour way (Black-orange stitching), they are supposed to be stretch over and glue on. They are not! They are too small, however if you peel the existing Nissan plastic covers off and use a couple of mole grips tools then they can be made to fit by stretching them over a couple of days and some strong contact adhesive. They look great when done though. Quote Link to comment Share on other sites More sharing options...
Toothy Posted June 18, 2014 Author Share Posted June 18, 2014 I ordered a set but none of the holes matched up,there to far away and the old gaitor has square bits to the surround also,have I ordered the wrong one I did but the set for a 2004,is there a guide? No problems with holes matching up for me. Double check you are getting it the correct way around and then contact the seller if you still have a problem. They have possibly sent you the wrong one. Quote Link to comment Share on other sites More sharing options...
hensh65 Posted August 27, 2014 Share Posted August 27, 2014 Hey guys, Fitted this yesterday night. Gear knob was easy enough but the hand brake was a nightmare. I gave up after a bit as the football was coming on (wish I hadn't bothered with that) Did you guy have the handbrake up or down when you fitted it? I tried to remove the rubber part around but was too scared of it not going back into place. Quote Link to comment Share on other sites More sharing options...
Mondo 300 Posted August 27, 2014 Share Posted August 27, 2014 Can everyone be aware that any parts made from REAL suede are very likely to discolour fairly quickly as suede will typically have no UV protection! Quote Link to comment Share on other sites More sharing options...
14N Posted August 27, 2014 Share Posted August 27, 2014 Hey guys, Fitted this yesterday night. Gear knob was easy enough but the hand brake was a nightmare. I gave up after a bit as the football was coming on (wish I hadn't bothered with that) Did you guy have the handbrake up or down when you fitted it? I tried to remove the rubber part around but was too scared of it not going back into place. It is a very tight squeeze and you may of seen I gave up on my first attempt aswell I fitted mine with the handbrake up and with the rubber surround still in position (I didn't want to remove it either). I found a fork with a flat rounded handle did the job of literally wedging the leather down between the handle and the console. Once it's started and you've got some of the leather in all the way round, it gets easier. Then it's just a case of fine tuning, pulling the handbrake on and off and wedging the gaitor until you're happy. Good luck! 1 Quote Link to comment Share on other sites More sharing options...
hensh65 Posted August 28, 2014 Share Posted August 28, 2014 Hey guys, Fitted this yesterday night. Gear knob was easy enough but the hand brake was a nightmare. I gave up after a bit as the football was coming on (wish I hadn't bothered with that) Did you guy have the handbrake up or down when you fitted it? I tried to remove the rubber part around but was too scared of it not going back into place. It is a very tight squeeze and you may of seen I gave up on my first attempt aswell I fitted mine with the handbrake up and with the rubber surround still in position (I didn't want to remove it either). I found a fork with a flat rounded handle did the job of literally wedging the leather down between the handle and the console. Once it's started and you've got some of the leather in all the way round, it gets easier. Then it's just a case of fine tuning, pulling the handbrake on and off and wedging the gaitor until you're happy. Good luck! Thanks Ian, I gave up pretty quickly and the champions league was coming on(wish I gave up on that as well) Will get out with a fork tonight and hopefully have a bit more luck!! Quote Link to comment Share on other sites More sharing options...
Mopedmark Posted February 7, 2015 Share Posted February 7, 2015 Got a pair and fitted them today with a little bit of eeeeer purple stitching 2 Quote Link to comment Share on other sites More sharing options...
tatooandy67 Posted February 7, 2015 Share Posted February 7, 2015 ^^^^ nice Quote Link to comment Share on other sites More sharing options...
Toothy Posted February 7, 2015 Author Share Posted February 7, 2015 Looks great Mark! 1 Quote Link to comment Share on other sites More sharing options...
Mopedmark Posted February 7, 2015 Share Posted February 7, 2015 Thanks guys Quote Link to comment Share on other sites More sharing options...
jayrishi Posted February 9, 2015 Share Posted February 9, 2015 Where did you purchase this from? Quote Link to comment Share on other sites More sharing options...
chirag1988 Posted February 9, 2015 Share Posted February 9, 2015 Where did you purchase this from? Link on the first page mate http://pages.ebay.co...5383590&alt=web Quote Link to comment Share on other sites More sharing options...
Mopedmark Posted February 9, 2015 Share Posted February 9, 2015 There first class I spoke to them via email on Wednesday evening, they made it up and sent it out Thursday, delivered on Friday Top Class Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.