Throttle Body Install - Now Problems :)

[Paddy78]

So, my mechanical skills are still very much in their infancy, but never-the-less, I had a go at installing a new throttle body over the weekend. Everything went on OK, but I now have a very erratic idle ranging from 600-3000 rpm or stall.

 

I've not done any resets yet as I wanted to make sure the exact one required. Could someone please confirm which procedures I need to complete?

 

Is it the full list:

 

ECU reset

Accelerator Pedal Release Position Learn

Throttle Valve Closed Position Learn

Idle Air Volume Learn

 

Anything else I should do / check? This is the first time I've tried the TB after buying it from a member on here, so hopefully a reset will do the trick and it isn't a duff!

Edited March 31, 2014 by Paddy78

[flyboy]

All of them cant hurt although probably just the 3rd one will suffice.

[Keyser]

What he said ^^^^^^^

 

However you can do all of them the ECU being the last.

 

Why did you change the TB?

[Ricey]

My understanding was just number 3 but as said the lot can't hurt really.

[Paddy78]

Why did you change the TB?

 

http://www.350z-uk.com/topic/80231-powder-coating-plenum-and-throttle-body-now-painted/

[Paddy78]

Thanks all, everything sorted! Muppet here had trapped the rubber thing near the oil filler cap in the plenum... I clearly should never be let near anything mechanical! Anyway, back idling smoothly at 750rpm now!

[glrnet]

Well done mate, you weren't the first and you won't be the last to do that

[Humpy]

Well done mate, you weren't the first and you won't be the last to do that

 

So true.

 

If I did this my car would be on fire before I knew it

[Mopedmark]

Well done done for sorting it