TiN TiN Posted February 6, 2014 Share Posted February 6, 2014 hi, found some nice wheels that I may buy, but wanted to make sure they'd be ok on the car (will fit, won't affect handling/speedo/etc). They are 18x8J ET35 5x114.3 Tyres are 225/40r/18 on it as standard Will these be ok? Quote Link to comment Share on other sites More sharing options...
Lexx Posted February 6, 2014 Share Posted February 6, 2014 The 350z runs a staggered set up as standard (rear wheels are wider than the fronts). Always best to retain the staggering if possible. Quote Link to comment Share on other sites More sharing options...
TiN TiN Posted February 6, 2014 Author Share Posted February 6, 2014 Why are they staggered as standard? What difference will it make to the handling if I put non staggered wheels on? Quote Link to comment Share on other sites More sharing options...
hensh65 Posted February 6, 2014 Share Posted February 6, 2014 I will let the tyre gurus confirm but I don't think you can run 40 profile on 18s. Well you can but you will think you are doing 30mph when your doing 40 Quote Link to comment Share on other sites More sharing options...
hensh65 Posted February 6, 2014 Share Posted February 6, 2014 Why are they staggered as standard? What difference will it make to the handling if I put non staggered wheels on? T/C will kick in a lot more. Quote Link to comment Share on other sites More sharing options...
Briggsybriggs1 Posted February 6, 2014 Share Posted February 6, 2014 I will let the tyre gurus confirm but I don't think you can run 40 profile on 18s. Well you can but you will think you are doing 30mph when your doing 40 I had 40s on OEM rays 225:40/18 front and 245/40/18 on rear they run fine :-) Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted February 6, 2014 Share Posted February 6, 2014 I will let the tyre gurus confirm but I don't think you can run 40 profile on 18s. Well you can but you will think you are doing 30mph when your doing 40 When going 30 it will say you're going 28.893mph. A 40 profile on the rear will put the speedo out by -3.69% so not a huge amount at all. Why are they staggered as standard? What difference will it make to the handling if I put non staggered wheels on? T/C will kick in a lot more. No it won't. A staggered set up means that as the fronts are narrower, they instinctively want to stay there, in the front. It's designed so that any billy can drive the car safely. Bearing in mind that if you don't have rays alloys you have a square set up anyway, I don't think it's going to affect the tcs, abs or any other safety system at all. Quote Link to comment Share on other sites More sharing options...
Lexx Posted February 6, 2014 Share Posted February 6, 2014 The Zeds TCS is twitchy. It's been known for it to become overactive when running same width wheels all round. Having said that, generally people who have done that have an incorrect tyre size too which completely confuses the TCS. Quote Link to comment Share on other sites More sharing options...
TiN TiN Posted February 6, 2014 Author Share Posted February 6, 2014 Does anyone know what the ET35 and the 8J are? Quote Link to comment Share on other sites More sharing options...
Lexx Posted February 6, 2014 Share Posted February 6, 2014 8J is width. 35ET is offset. There's a guide about offset I did in the FAQ. Go read. Quote Link to comment Share on other sites More sharing options...
brillomaster Posted February 6, 2014 Share Posted February 6, 2014 swap the rears for 245/40/18 and you'll be right as rain. It will affect the handling as a lower profile than normal will mean less compliance from the tyres over uneven roads, but you'll also have slightly less sidewall flex when turning in to corners, so the car will change direction marginally better. lower profile tyres will also affect the speedo, when the speedo reads 30mph, you'll actually be going 28.9 mph. however, the car will be a tiny bit quicker to accelerate as the lower tyre circumference will effectively change the final drive ratio. lastly, the zeds tcs is designed such that the rear wheels are rotating slower than the fronts (on standard size the rear wheels have a larger circumference). if you run identical tyres front and rear the car will think the rears are spinning faster than they should be, so might trigger the traction control. Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted February 6, 2014 Share Posted February 6, 2014 Does anyone know what the ET35 and the 8J are? Quote Link to comment Share on other sites More sharing options...
brillomaster Posted February 6, 2014 Share Posted February 6, 2014 Does anyone know what the ET35 and the 8J are? Alright smartypants, what does 'ET' actually stand for, and what does the 'J' refer to? Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted February 6, 2014 Share Posted February 6, 2014 (edited) Does anyone know what the ET35 and the 8J are? Alright smartypants, what does 'ET' actually stand for, and what does the 'J' refer to? ET, whilst I'm not sure on the actual meaning of the letters themselves, is the offset of the wheel ie how close to the centre line of the alloy the mounting face is and the J is the width of the alloy itself. It's not the fact that these weren't known, as everyone has to start somewhere, but a 30 second google would have probably provided the information far more quickly. Edit: Also, I wasn't actually meaning it was that much of a fail, I just thought it was cool he was lord Zedd Edited February 6, 2014 by AliveBoy Quote Link to comment Share on other sites More sharing options...
14N Posted February 6, 2014 Share Posted February 6, 2014 Bearing in mind that if you don't have rays alloys you have a square set up anyway,.... ...but a 30 second google would have probably provided the information far more quickly. A quick google search will also tell you that pretty much all wheels are round, not square, regardless of whether they're Rays or not TiN TiN - Have you found a car then? Or just looking at wheels in anitcipation? Quote Link to comment Share on other sites More sharing options...
brillomaster Posted February 6, 2014 Share Posted February 6, 2014 (edited) true google knows all! i'm just being awkward... i know offset and wheel widths no problem. the actual letters do mean something as you say - ET stands for 'Einpresstiefe' - which is german for literally 'depth of wheel' ( i had to google that ) and 'J ' refers to the actual shape of the cross section of the rim, ie the bit the tyre hooks onto. I've never heard of an automotive wheel that wasnt a 'J' though! EDIT: for anyone that cares, im a little bit wrong... J isnt the actual shape of the tyre/wheel bead profile, its the designation of that tyre/wheel bead. Apparently there are J, JJ, K, JK, B, P and D types! Read more: http://www.carbibles.com/tyre_bible_pg4.html#rimcontours#ixzz2sY0reU8F Edited February 6, 2014 by brillomaster Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted February 6, 2014 Share Posted February 6, 2014 Bearing in mind that if you don't have rays alloys you have a square set up anyway,.... ...but a 30 second google would have probably provided the information far more quickly. A quick google search will also tell you that pretty much all wheels are round, not square, regardless of whether they're Rays or not TiN TiN - Have you found a car then? Or just looking at wheels in anitcipation? THAT'S why the car rides so badly and I need so many revs to get it moving 1 Quote Link to comment Share on other sites More sharing options...
TiN TiN Posted February 6, 2014 Author Share Posted February 6, 2014 Bearing in mind that if you don't have rays alloys you have a square set up anyway,.... ...but a 30 second google would have probably provided the information far more quickly. A quick google search will also tell you that pretty much all wheels are round, not square, regardless of whether they're Rays or not TiN TiN - Have you found a car then? Or just looking at wheels in anitcipation? I've found one I'm going to see tomorrow. If I like, I'll buy but I don't like the standard wheels on it so definitely gonna be looking to get different ones.. Think I've got a lot to learn about wheels first :-/ Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted February 6, 2014 Share Posted February 6, 2014 Bearing in mind that if you don't have rays alloys you have a square set up anyway,.... ...but a 30 second google would have probably provided the information far more quickly. A quick google search will also tell you that pretty much all wheels are round, not square, regardless of whether they're Rays or not TiN TiN - Have you found a car then? Or just looking at wheels in anitcipation? I've found one I'm going to see tomorrow. If I like, I'll buy but I don't like the standard wheels on it so definitely gonna be looking to get different ones.. Think I've got a lot to learn about wheels first :-/ This is what you're looking at for standards, you will want something with the same or lower offset (ET) and the same or higher alloy width (J) The tyre sizes will then either stay the same or change accordingly. Front Size: 18" x 8.0" Offset (ET) : + 30 mm Tyre: 225/45/18 Rear Size: 18" x 8.5"(J) Offset (ET): + 33 mm Tyre: 245/45/18 Hopefully this redeems my doushebaggery Quote Link to comment Share on other sites More sharing options...
LRF4N Posted February 6, 2014 Share Posted February 6, 2014 8" wide on the rear with a high offset in 18s will look naff Quote Link to comment Share on other sites More sharing options...
brillomaster Posted February 6, 2014 Share Posted February 6, 2014 a while back i found a really good site that showed a 3d wheel with widths and offsets you can pick.unfortunately i cant for the life of me find it now! however, this does the same thing in 2d form - play with the sliders and you'll soon get the jist of what offset does. http://code.beardfu.com/wheel-offset-calculator/#wo_vis Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted February 6, 2014 Share Posted February 6, 2014 This is a very good site: http://www.willtheyfit.com/ Quote Link to comment Share on other sites More sharing options...
hensh65 Posted February 6, 2014 Share Posted February 6, 2014 I will let the tyre gurus confirm but I don't think you can run 40 profile on 18s. Well you can but you will think you are doing 30mph when your doing 40 When going 30 it will say you're going 28.893mph. A 40 profile on the rear will put the speedo out by -3.69% so not a huge amount at all. Why are they staggered as standard? What difference will it make to the handling if I put non staggered wheels on? T/C will kick in a lot more. No it won't. A staggered set up means that as the fronts are narrower, they instinctively want to stay there, in the front. It's designed so that any billy can drive the car safely. Bearing in mind that if you don't have rays alloys you have a square set up anyway, I don't think it's going to affect the tcs, abs or any other safety system at all. Can't a guy exaggerate these days Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.