Jump to content

Auto Door Locking


stu1986

Recommended Posts

The automatic door lock function ON/OFF can be switched by performing the following operation.

1. Close all doors (door switch OFF)

2. Turn ignition switch ON

3. Press and hold the door lock and unlock switch for 5 seconds or more in the lock direction within 20 seconds

after turning the ignition switch ON.

4. The switching is complete when the hazard lamp blinks.

OFF → ON : 2 blinks

ON → OFF : 1 blink

 

I haven't tested it :-)

Link to comment
Share on other sites

And ...

To change between selective unlock enabled or disabled (default):

 

Selective Unlock - Enabled

When an LOCK signal is transmitted from Intelligent Key, all doors and fuel lid are locked.

When an UNLOCK signal is transmitted from Intelligent Key once, driver side door and fuel lid are unlocked.

Then, if an UNLOCK signal is transmitted from Intelligent Key again within 60 seconds, all other doors are

unlocked.

 

Selective Unlock - Disabled

When an LOCK signal is transmitted from Intelligent Key, all doors and fuel lid are locked.

When an UNLOCK signal is transmitted from Intelligent Key once, all doors and fuel lid are locked.

 

Enabling/Disabling Selective Unlock

When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 5 seconds at the same time, hazard warning lamp blinks and Selective Unlock feature will toggle (enabled -> disabled or disabled -> enabled)

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...