Zhorno Posted November 19, 2013 Share Posted November 19, 2013 Any 1 done this on there zed ? Or any 1 have a pic on azure ? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
KyleR Posted November 19, 2013 Share Posted November 19, 2013 Not seen it on an azure, but I've seen black and gun metal, looks ok, but I'm pretty sure it's an mot failure if that interests you... Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted November 19, 2013 Share Posted November 19, 2013 I have seen it on a couple of Zeds, it looks like what it is really, not too bad but not great either, just accept that brake lights are supposed to be red and move on..... Quote Link to comment Share on other sites More sharing options...
Zhorno Posted November 19, 2013 Author Share Posted November 19, 2013 I was thinking about doing the fronts to be honest , hmmm Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Richf Posted November 19, 2013 Share Posted November 19, 2013 Fitted some on my Fabia , as far as I know it is mot legal certainly is according to their website but looked rubbish IMO , stayed on for about an hour Quote Link to comment Share on other sites More sharing options...
Easty Posted November 19, 2013 Share Posted November 19, 2013 Are you talking about the wrap stuff to make them dark?? Iv got the spy vision tint on all my rear lights, mine is a Azure it really makes a difference and makes it look a lot tidier. . . . Iv been toying with the idea of getting it on the front too but kinda fancy the eyebrows instead. . http://www.spi-vision.co.uk/gallery/ O and it is completely legal :-) Quote Link to comment Share on other sites More sharing options...
Easty Posted November 19, 2013 Share Posted November 19, 2013 Haven't got a before photo but in the first picture I only had one of the bottom lights done so it show the difference Quote Link to comment Share on other sites More sharing options...
Zhorno Posted November 19, 2013 Author Share Posted November 19, 2013 Seen this and thought it looked sweet obviously red but still Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
KyleR Posted November 20, 2013 Share Posted November 20, 2013 Fitted some on my Fabia , as far as I know it is mot legal certainly is according to their website but looked rubbish IMO , stayed on for about an hour Does the regulations not say something about anything that restricts the light output from lights is a fail? Quote Link to comment Share on other sites More sharing options...
Richie-B Posted November 20, 2013 Share Posted November 20, 2013 I put my M3 through a mot with this stuff on the headlights and it passes. My mate has also tested his Scooby with this stuff on the head lights at a different garage. The light isn't really effected because its like a mesh. Quote Link to comment Share on other sites More sharing options...
Zhorno Posted November 20, 2013 Author Share Posted November 20, 2013 Well at least we got that cleared up I no my car will always pass mot that don't bother me 😠, just wanted to see some on a azure zed Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
14N Posted November 20, 2013 Share Posted November 20, 2013 I've just ordered myself some of this stuff. For the sake of less than £8 for enough material to do both headlights, I figured it's worth a go. According to the UK distributers/sellers, it does not affect light output and is therefore MOT safe. It's self adhesive, so if it looks cack, I'll just pull it off. Watch this space.... Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted November 20, 2013 Share Posted November 20, 2013 Fitted some on my Fabia , as far as I know it is mot legal certainly is according to their website but looked rubbish IMO , stayed on for about an hour Does the regulations not say something about anything that restricts the light output from lights is a fail? I comes with a booklet details why it doesn't affect the light output and why it is legal. I've just ordered myself some of this stuff. For the sake of less than £8 for enough material to do both headlights, I figured it's worth a go. According to the UK distributers/sellers, it does not affect light output and is therefore MOT safe. It's self adhesive, so if it looks cack, I'll just pull it off. Watch this space.... I tried it about 3 years ago, you need to be careful when you start as unlike vinyl you can't stretch it and the headlights do curve quite a bit. I'm sure if you line it up properly it could be ok though When I did it I got wrinkles in it and couldn't get them out so I gave up. Good luck! Quote Link to comment Share on other sites More sharing options...
Lexx Posted November 20, 2013 Share Posted November 20, 2013 Makes rear lights look like they need a wash imo. 3 Quote Link to comment Share on other sites More sharing options...
JordanHill Posted November 20, 2013 Share Posted November 20, 2013 I think you have to be careful putting it on headlights when you have xenons as they reckon the heat can melt the plastic. Just something ive read on their website :/ Quote Link to comment Share on other sites More sharing options...
mattross1313 Posted November 20, 2013 Share Posted November 20, 2013 We bought some a little while back for the misses Evo. The website said it was indeed road/MOT legal, and it was indeed cheap for the amount we got. It did however look shite. From far away (really far away) the lights looked to have a nice tint, however get anywhere near the car and it was cheap. just my 2p. Quote Link to comment Share on other sites More sharing options...
mattross1313 Posted November 20, 2013 Share Posted November 20, 2013 I've just ordered myself some of this stuff. I didn't know they did it in orange? Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted November 20, 2013 Share Posted November 20, 2013 I've just ordered myself some of this stuff. I didn't know they did it in orange? To be fair, they actually do! They'll do any colour you want if you pre order it Quote Link to comment Share on other sites More sharing options...
mattross1313 Posted November 20, 2013 Share Posted November 20, 2013 I've just ordered myself some of this stuff. I didn't know they did it in orange? To be fair, they actually do! Well I'll be!! *I4N goes off to change his order for more orange* 2 Quote Link to comment Share on other sites More sharing options...
Easty Posted November 20, 2013 Share Posted November 20, 2013 I like that red one so much I think I might try it on the front of mine :-) Quote Link to comment Share on other sites More sharing options...
14N Posted November 20, 2013 Share Posted November 20, 2013 I've just ordered myself some of this stuff. I didn't know they did it in orange? To be fair, they actually do! Well I'll be!! *I4N goes off to change his order for more orange* Quote Link to comment Share on other sites More sharing options...
coldel Posted November 20, 2013 Share Posted November 20, 2013 It is an MoT failure. I had this on my black Zed some time back it does reduce the light, and is noticeable when driving. It is just vinyl with holes in it after all. The claim its an mot pass on their website was on there from years back, last year the regulations were updated that anything which reduces the light from the lights on your car is an mot failure, which this does. Some garages might let it go, but by law, its a failure. I thought it looked good on my black Zed Quote Link to comment Share on other sites More sharing options...
Zhorno Posted November 20, 2013 Author Share Posted November 20, 2013 Looks sweet how hard was it ? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
coldel Posted November 20, 2013 Share Posted November 20, 2013 Pretty easy, its just like vinyl so just cut it roughly to shape of the headlight with about two inches spare around the edges, put it on in the middle and work your way out. Have a hair dryer type thing handy to heat so its easier to shape. For the fronts, just have a credit card handy so you can use it to tuck the edges down between the light and the bodywork, for the rear lights, its easier to just unbolt them - a couple of bolts on each light and you can lift them out. Quote Link to comment Share on other sites More sharing options...
Zhorno Posted November 20, 2013 Author Share Posted November 20, 2013 Some 1 must have done there azure lol Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.