dbass Posted September 27, 2013 Posted September 27, 2013 Ok so I had an oil change the other day, but because the oil is so clean it's difficult to see what level on the dipstick it is at.. I've wiped it completely clean and redippped it but still hard to see. The back of the dipstick seems to have more oil going up the back of it.. Than the front.. I don't know I'm used to seeing it quite clearly on my other previous cars... Does anyone else have this issue? Quote
chubbster Posted September 27, 2013 Posted September 27, 2013 As dipsticks go, the 350z one is a total dog. You've probably picked up a bit of oil on one side while the dipstick was travelling on its tortuous route either up or down the shaft. Just keep trying - eventually you'll get a reading you can believe. 1 Quote
dbass Posted September 27, 2013 Author Posted September 27, 2013 I hope there is enough oil in there! Quote
MITZ@CougarStore Posted September 27, 2013 Posted September 27, 2013 How much oil did you use, 4.7 litres... 1 Quote
dbass Posted September 27, 2013 Author Posted September 27, 2013 The mechanic put it just under 5 as he put it... Quote
dbass Posted September 27, 2013 Author Posted September 27, 2013 I will check when it's settle for an hour or more Quote
WhackyWill Posted September 27, 2013 Posted September 27, 2013 Zed Dipstick was designed by a dipstick...its the worse piece of engineering to come out of Nissan.. Quote
ATTAK Z Posted September 27, 2013 Posted September 27, 2013 It's best to check after an overnight rest on a level surface ... that will give you an accurate cold level 1 Quote
jollyranchers Posted September 27, 2013 Posted September 27, 2013 as above , do it from cold. You get two goes to check it before the oil is dragged up the dipstick pipe and gives you a crappy readings whoever designed that dip stick arrangement should be ashamed Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.