martek Posted September 27, 2013 Share Posted September 27, 2013 Hi Guy's I'm going to have a go at fitting the Berk HFC's, had al ook under the car and they look a bit of a bugger to get to the top manifold bolts, so any advice welcome. Cheers Dave. Quote Link to comment Share on other sites More sharing options...
buster Posted September 27, 2013 Share Posted September 27, 2013 make sure you have lots of extension bars for the socket set.spray wd 40 on the night before and get yourself some spare exhaust bolts/nuts. Quote Link to comment Share on other sites More sharing options...
ioneabee Posted September 27, 2013 Share Posted September 27, 2013 my advice - get someone else to do it its a bitch 1 Quote Link to comment Share on other sites More sharing options...
Neilp Posted September 27, 2013 Share Posted September 27, 2013 my advice - get someone else to do it its a bitch I agree! Quote Link to comment Share on other sites More sharing options...
Arran Posted September 27, 2013 Share Posted September 27, 2013 Its not that hard! One nut needs an extension from the engine bay then the other two from under the car obviously there are a pair Quote Link to comment Share on other sites More sharing options...
scobie140 Posted September 27, 2013 Share Posted September 27, 2013 Better with plus gas rather than than wd40 but will still be a pain to get them off 1 Quote Link to comment Share on other sites More sharing options...
K370Z2 Posted September 27, 2013 Share Posted September 27, 2013 Keep advice coming on ways to do it urself cause i have a set to fit my self Ha Ha Quote Link to comment Share on other sites More sharing options...
BillyZed Posted September 27, 2013 Share Posted September 27, 2013 Plus gas is the best thing since sliced bread Quote Link to comment Share on other sites More sharing options...
ioneabee Posted September 27, 2013 Share Posted September 27, 2013 seriously - have a garage on standbye Quote Link to comment Share on other sites More sharing options...
Neilp Posted September 27, 2013 Share Posted September 27, 2013 The nuts will be seized solid and will probably snap. Quote Link to comment Share on other sites More sharing options...
martek Posted September 27, 2013 Author Share Posted September 27, 2013 Is it a problem if they do snap, the Berks all use nuts and bolts? Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted September 27, 2013 Share Posted September 27, 2013 If they snap they'll probably need drilling out... Quote Link to comment Share on other sites More sharing options...
jumping350 Posted September 27, 2013 Share Posted September 27, 2013 Or pop it to a garage and get them to crack nuts for you and bung them a tenner, take home and swap, if they snap a stud/nut you might as well get them to finish job 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.