080m40 Posted August 12, 2013 Share Posted August 12, 2013 Hi I parked my car , however someone was spraying gloss paint some distance away . And wind caused it to land all over car , all over the car paint , windows , rubbers glass etc, I'm livid- anybody what could get it off , safely cheers Quote Link to comment Share on other sites More sharing options...
DoogyRev Posted August 12, 2013 Share Posted August 12, 2013 Clay Bar will do the trick You could also PM Tim @ Envy for further advice Quote Link to comment Share on other sites More sharing options...
ioneabee Posted August 12, 2013 Share Posted August 12, 2013 clay bar if you're quick (whilst is still relatively soft) - otherwise it'll probably mean something a little harsher Quote Link to comment Share on other sites More sharing options...
Lexx Posted August 12, 2013 Share Posted August 12, 2013 Clay bar will take it off. And it doesn't need to be too quick. A helpful council man covered the back end of mine in blue paint whilst it was in a council lock up. I was at sea at the time, and didn't find the damage until 4 weeks after the incident. A mild clay bar removed it all no problem. Quote Link to comment Share on other sites More sharing options...
080m40 Posted August 12, 2013 Author Share Posted August 12, 2013 I tried a clar bar , but I'm no expert it wouldn't touch it , I tried t cut comes out slowly but serious rubbing, I tried a small bit with thinners , it came out but be very slow , as car is covered in very light gloss dpecks as I'm trying not to damage paint whilst I try and get it off .... Quote Link to comment Share on other sites More sharing options...
Lexx Posted August 12, 2013 Share Posted August 12, 2013 (edited) Do not use Thinners or T-cut. You will damage your paint as it's so thin. Use a more agressive claybar. Pay a pro detailer to do it. Edited August 12, 2013 by Lexx Quote Link to comment Share on other sites More sharing options...
DoogyRev Posted August 12, 2013 Share Posted August 12, 2013 Do not use Thinners or T-cut. You will damage your paint as it's so thin. Use a more agressive claybar. Pay a pro detailer to do it. + Lots http://www.350z-uk.com/forum/113-envy-valeting/ Quote Link to comment Share on other sites More sharing options...
ioneabee Posted August 12, 2013 Share Posted August 12, 2013 Do not use Thinners or T-cut. You will damage your paint as it's so thin. Use a more agressive claybar. Pay a pro detailer to do it. again this ^^ Quote Link to comment Share on other sites More sharing options...
080m40 Posted August 12, 2013 Author Share Posted August 12, 2013 Yes I noticed it was so thin , I took it to a bodyshop he said he would use thinners , then polish after , Which I wasn't comfortable with , Quote Link to comment Share on other sites More sharing options...
080m40 Posted August 12, 2013 Author Share Posted August 12, 2013 Hi there anybody know anyone in the midlands England. Who could do it , cheers Quote Link to comment Share on other sites More sharing options...
Lexx Posted August 12, 2013 Share Posted August 12, 2013 At the risk of repeating myself.... PRO DETAILER. A bodyshop are usually only anygood at painting and fitting. You need someone who looks after the paint that's already on for a living. Quote Link to comment Share on other sites More sharing options...
DoogyRev Posted August 12, 2013 Share Posted August 12, 2013 PM Wasso Quote Link to comment Share on other sites More sharing options...
Lexx Posted August 12, 2013 Share Posted August 12, 2013 Go onto detailing world forum and have a look for someone local to you. Quote Link to comment Share on other sites More sharing options...
The G Man Posted August 12, 2013 Share Posted August 12, 2013 Have you tried WD40? Seriously, it gets rid of stuff like automotive glues, such as what's behind badges etc, worth a go. 1 Quote Link to comment Share on other sites More sharing options...
080m40 Posted August 12, 2013 Author Share Posted August 12, 2013 Great stuff thanks for all your help Quote Link to comment Share on other sites More sharing options...
Will370z Posted August 12, 2013 Share Posted August 12, 2013 PM wasso he is in the midlands Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.