Rajzed Posted February 13, 2013 Share Posted February 13, 2013 Hey guys, Just purchased a second hand D1 Spec throttle controller from a forum member (I will not disclose the member just in case!) and the accelerator pedal does not click fully in to the the throttle controller connector. Its the male from the throttle controller that doesn't make a click sounds as its pressed into the female. Also, I believe it is making contact and when turning the ignition (not fully on), it does not provide power to the throttle controller! What could be the issue?? Regards, Raj Quote Link to comment Share on other sites More sharing options...
DoogyRev Posted February 13, 2013 Share Posted February 13, 2013 Check the plug is on the right way round Quote Link to comment Share on other sites More sharing options...
jumping350 Posted February 13, 2013 Share Posted February 13, 2013 Check the plug is on the right way round +1 check wiring isnt damaged or pinched anywhere but its pretty straight forward if it dont work one way should work the other Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted February 13, 2013 Share Posted February 13, 2013 As what Doogy has said. 99.9% of the time it is fitment error with these. Alex Quote Link to comment Share on other sites More sharing options...
Rajzed Posted February 14, 2013 Author Share Posted February 14, 2013 Ah ha! I found out what it was! Wires were broken at the OBD and the male clip. Re-soldered and jobs a good-un! Once again, the kind forum guys help out - never ceases to amaze me! Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.