Shaun1982 Posted February 13, 2013 Share Posted February 13, 2013 So, Alex told me that UK lights aren't a straight swap onto a JDM, reason being they have 7 pins. Question is how much work is involved to fit them? A simple chop plugs off & fit the JDM plugs from the old lights leaving out the 7th pin kinda thing? Quote Link to comment Share on other sites More sharing options...
KyleR Posted February 13, 2013 Share Posted February 13, 2013 TBH, I think Alex is the best man to ask about this, but I don't see why it's not just a matter of changing the connectors. However, you can't buy the connectors on their own, you have to get the whole loom which is quite pricey when all you actually need is one connector from it. I had a situation where the previous owner had done a botch job repairing the O/S headlamp on my UK, where the ballast had got soaked and it was replaced by one of those chinese HID kits that you can buy for any car. In doing so they chopped off the connector and I had to source a new one from Alex, only to be told I had to buy the whole loom if I wanted to put it back to OEM ballast like it should have been done in the first place. Had to be done though! Infact, it probably cost the previous own more to get this done that to just buy a ballast for £90 online Quote Link to comment Share on other sites More sharing options...
Shaun1982 Posted February 13, 2013 Author Share Posted February 13, 2013 Sounds like this is going to be expensive then. As I said before I really want to run hids like my last zed Quote Link to comment Share on other sites More sharing options...
Dblock Posted February 13, 2013 Share Posted February 13, 2013 I'm sure you can make them work. I'm sure husky has some experience on them. If not buy a hid kit with the R e.g. H7R they are supposed to be better in reflected style head lights. Quote Link to comment Share on other sites More sharing options...
KyleR Posted February 13, 2013 Share Posted February 13, 2013 Sounds like this is going to be expensive then. As I said before I really want to run hids like my last zed Sorry I didn't mean it's going to cost a fortune, just more than the £2 a wee clip like that should cost. I'm sure if you ask Alex he'll have a loom lying about that you need. Quote Link to comment Share on other sites More sharing options...
Shaun1982 Posted February 13, 2013 Author Share Posted February 13, 2013 Lol it's ok mate, I'm still expecting it to be a fair few hundred quid anyway. Just found a new passenger light from Nissan on eBay. £700 odd though :o Quote Link to comment Share on other sites More sharing options...
KC350Z Posted February 13, 2013 Share Posted February 13, 2013 It because jdm dont have self leaveling and thats what the extra pins are for i belive Quote Link to comment Share on other sites More sharing options...
KyleR Posted February 13, 2013 Share Posted February 13, 2013 Lol it's ok mate, I'm still expecting it to be a fair few hundred quid anyway. Just found a new passenger light from Nissan on eBay. £700 odd though :o We'll I think you'll need 2 looms for the clips, 2 ballasts and bulbs, 300 should do it. I have an extra ballast here but it's untested but with no reason to assume it doesn't work. Won't be up for sale until I sort another part out though. Quote Link to comment Share on other sites More sharing options...
Shaun1982 Posted February 13, 2013 Author Share Posted February 13, 2013 I need lights as well dude. That's my thinking for the big cost. Do the zeds have one leveller in the back or one each side? There's one on eBay I saw the other day Quote Link to comment Share on other sites More sharing options...
KyleR Posted February 13, 2013 Share Posted February 13, 2013 Ah the JDM don't have the gap for the ballast on the bottom? I think it's just one and it's located near the rear p/s wheel, but might be wrong. Technically you'll also need headlight washers too to be completely legal Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted February 13, 2013 Share Posted February 13, 2013 (edited) There are 2 main wiring block connector types. One is a 6 pin and the other 8 pin. 8 pin has self leveling and the 6 pin configuration does not. JDM models are predominantly 6 pin. You can fit 8 pin headlamps to the 6 pin wiring loom, however you will have to alter the wiring, however you will not have self leveling as the 6 pin cars do not have the leveling device which is located on the rear subframe. Alex. Edited February 13, 2013 by ZMANALEX Quote Link to comment Share on other sites More sharing options...
Shaun1982 Posted February 13, 2013 Author Share Posted February 13, 2013 There we go My last zed didn't have self levelling so I'm not fussed about that. So I can stick a set with hids in no problems then? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.