choptop Posted January 30, 2013 Share Posted January 30, 2013 Went to start the zed for the first time after the recent cold snap. Reluctantly started then immediately cut out. Did this a few times and finally started but no acceleration at all. Various warning lights came up on the dash. Turned engine off. Waited a minute and restarted but ignition light has come on and will not go off. Is there a reset I can do? Advice needed please. Quote Link to comment Share on other sites More sharing options...
Lexx Posted January 30, 2013 Share Posted January 30, 2013 Check the charge on your battery before you go any further. Z33's do crazy @*!# when battery is dying. Quote Link to comment Share on other sites More sharing options...
SteveM Posted January 30, 2013 Share Posted January 30, 2013 what he said...... Quote Link to comment Share on other sites More sharing options...
choptop Posted January 30, 2013 Author Share Posted January 30, 2013 Check the charge on your battery before you go any further. Z33's do crazy @*!# when battery is dying. Thanks Lexx. Has never done it before. The light which remains constantly lit is the malfunction indicator. ?? What it is. How do you do a reset? Quote Link to comment Share on other sites More sharing options...
Sly@Kaizer Motor Posted January 30, 2013 Share Posted January 30, 2013 Check the charge on your battery before you go any further. Z33's do crazy @*!# when battery is dying. Thanks Lexx. Has never done it before. The light which remains constantly lit is the malfunction indicator. ?? What it is. How do you do a reset? Low battery voltage may triggered some fault code in your ECU. There is a way to read and erase it without a computer, but it's not easy. I would recommend to get it checked with a code reader (you can get one for a few ££) or at your local garages. If it can be erased than fine, if not let us know what the code is. I hope this helps. Quote Link to comment Share on other sites More sharing options...
Lexx Posted January 30, 2013 Share Posted January 30, 2013 The pedal dance to read the code and reset codes is in the Guides sections. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.