Harryjax Posted January 28, 2013 Share Posted January 28, 2013 Any one know how to remove the B pillar cover? I have an annoying noise coming from the drivers side when driving at speeds above (+50>) with the window down. It sounds like its loose. Any advice welcome. Quote Link to comment Share on other sites More sharing options...
taras Posted January 28, 2013 Share Posted January 28, 2013 If you're talking about the outside black covers just before the rear quarter windows, they simply pop off. Its held on by 3 plastic poppers. If you have like a hard plastic wedge to assist it's easier. Quote Link to comment Share on other sites More sharing options...
Harryjax Posted January 28, 2013 Author Share Posted January 28, 2013 Thanks RTP I will see if it will pop off later as soon as this rain stops. Quote Link to comment Share on other sites More sharing options...
TheMacDaddy Posted January 28, 2013 Share Posted January 28, 2013 Careful. There's one popper at the bottom and two plastic flanges that you're supposed to slide off upwards. You can pull the whole thing off away fom the car but you'll probably break the middle one. £80 from Nissan if you need a new one. Guess how I know... Quote Link to comment Share on other sites More sharing options...
Harryjax Posted January 28, 2013 Author Share Posted January 28, 2013 Careful. There's one popper at the bottom and two plastic flanges that you're supposed to slide off upwards. You can pull the whole thing off away fom the car but you'll probably break the middle one. £80 from Nissan if you need a new one. Guess how I know... Cheers for advice. Quote Link to comment Share on other sites More sharing options...
WhackyWill Posted January 28, 2013 Share Posted January 28, 2013 If you going to remove them in the Winter, heat the popers up first with a hair dryer otherwise you will snap them. 1 Quote Link to comment Share on other sites More sharing options...
TheMacDaddy Posted January 29, 2013 Share Posted January 29, 2013 If you going to remove them in the Winter, heat the popers up first with a hair dryer otherwise you will snap them. +1 Did a lot of work on my car this weekend and all of the plastics are a bit scary to work with sub 10 degrees. My cable ties just didn't work - would snap in two if you bent them - I had to heat them up and keep them in my pocket! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.