Jack94 Posted August 29, 2018 Share Posted August 29, 2018 5 hours ago, cs2000 said: Whoever does the install first on both a Rev-Up and a HR, just double check your connections are 100% right. If theirs any doubt, give me a PM first. Id be grateful if anyone who does this install first on these cars can send me a picture or a list of the exact wire colours and pin numbers so i can make sure the guide is 100% correct. I want to make it as easy as possible and im pretty sure for the Rev-Up its correct, but dont have any photographic evidence to confirm it. I suspect the HR is the same as the Rev-Up, but again, cannot confirm. I've got a Rev-up so I hope you've got it right Either way, I can let you know wire colours/pin numbers once the module arrives and I get round to fitting it if you like 1 Quote Link to comment Share on other sites More sharing options...
taybo Posted August 29, 2018 Share Posted August 29, 2018 (edited) Pretty sure the Rev-up and HR are the same colour wires. I made this diagram for Rev-up colour codes after installing my Flyboy module Edited August 29, 2018 by taybo Quote Link to comment Share on other sites More sharing options...
cs2000 Posted August 30, 2018 Share Posted August 30, 2018 16 hours ago, Jack94 said: I've got a Rev-up so I hope you've got it right Either way, I can let you know wire colours/pin numbers once the module arrives and I get round to fitting it if you like I did actually "borrow" @taybo's wire colour guide as he has posted above. What im after however is just 100% confirmation that the drawing is correct and what the pin numbers are so I can add them to the guide. The wire colours ARE correct however, just maybe not their positions on the plug. I have PM'd taybo to double check for me too Quote Link to comment Share on other sites More sharing options...
cs2000 Posted September 1, 2018 Share Posted September 1, 2018 (edited) Right! the day has come! FInally got everything in I need to finish these so ready to get them made and sent out today/Monday. Everyone on the list now has a PM in their inbox saying what to do next . Il keep this list updated as people pay and modules are shipped. Youll all get a PM with your tracking number once I have it too 1. alfa_owner (2x) - Deposit Received 2. craigmdennis - Posted 3. StuZGT - Posted 4. baileydom - Posted 5. Kryptek49 - Posted 6. Jack94 - Posted 7. PabloVC - Posted 8. Jcurtis - Deposit Received 9. Skate2create - Posted 10. Nelly64 11. Luke2208 - Posted 12. btoms350z - Posted I also now have 3 of these in stock currently, so anyone else interested, these should be available immediately from now onwards. Edited September 5, 2018 by cs2000 Quote Link to comment Share on other sites More sharing options...
baileydom Posted September 1, 2018 Share Posted September 1, 2018 Oh yeah meant to say Chris, I’ve got a HR so I’ll check the colours and positions on the wires when it goes in and let you know. Dom 2 Quote Link to comment Share on other sites More sharing options...
cs2000 Posted September 2, 2018 Share Posted September 2, 2018 (edited) OK guys, thanks for your payments over the weekend! Anyone who has paid right now, il get these out to you tomorrow at some stage. Im in Manchester foir the next 2 days for work and so anyone that paid tomorrow will have to wait until Wednesday for postage. Of course, if anyone else on the list pays tonight ( @alfa_owner, @PabloVC and @Jcurtis ) il take the parcels with me and post tomorrow.! EDIT: all paid items have been posted just now. Will try to sort you all out with tracking numbers tonight, but I am away with work at the moment. Edited September 3, 2018 by cs2000 1 Quote Link to comment Share on other sites More sharing options...
skate2create Posted September 4, 2018 Share Posted September 4, 2018 (edited) All received this morning, thank you Is there a fitting guide/cable colour guide on here somewhere? Edited September 4, 2018 by skate2create Quote Link to comment Share on other sites More sharing options...
Kryptek49 Posted September 4, 2018 Share Posted September 4, 2018 I got a pm with fitting instructions sent to me, @cs2000 must have missed you off the mailing list. Quote Link to comment Share on other sites More sharing options...
Nelly64 Posted September 4, 2018 Share Posted September 4, 2018 (edited) Have any HR owners installed the module ? I'm not able to get at mine to see if it can be done. Edited September 4, 2018 by Nelly64 Quote Link to comment Share on other sites More sharing options...
baileydom Posted September 4, 2018 Share Posted September 4, 2018 I’ll probably do mine tomorrow. Quote Link to comment Share on other sites More sharing options...
Kryptek49 Posted September 4, 2018 Share Posted September 4, 2018 5 hours ago, Nelly64 said: Have any HR owners installed the module ? I'm not able to get at mine to see if it can be done. Doing mine tomorrow so I'll let you know Quote Link to comment Share on other sites More sharing options...
baileydom Posted September 5, 2018 Share Posted September 5, 2018 All fitted and working on a HR. The HR plug has an extra wire on the small plug (in the blank position on the revup so not needed). All the rest are in the same positions. The only issue I had was that I had to reverse the white/red and white/green cables on mine. Otherwise as per the guide it was closing them on start and opening on lock. Chris I’ve pm’d you. Just putting this here for he other guys with HRs who were looking at fitting today. 1 3 Quote Link to comment Share on other sites More sharing options...
skate2create Posted September 5, 2018 Share Posted September 5, 2018 On 04/09/2018 at 13:59, Kryptek49 said: I got a pm with fitting instructions sent to me, @cs2000 must have missed you off the mailing list. Yep I'm a t*t... It was in the initial pm.. Quote Link to comment Share on other sites More sharing options...
Jack94 Posted September 5, 2018 Share Posted September 5, 2018 2 hours ago, baileydom said: The only issue I had was that I had to reverse the white/red and white/green cables on mine. Otherwise as per the guide it was closing them on start and opening on lock. Fitted mine to my Rev-up this morning and all works fine now but had the same issue initially. Had to swap the wires around so the white and orange wires from the module now go to the white/red wire on the car and the grey and brown wires go to the white/green wire. Quote Link to comment Share on other sites More sharing options...
baileydom Posted September 5, 2018 Share Posted September 5, 2018 No just to clarify I had to swap both. The button inside worked as normal but the auto fold was reversed. So I’ve now got the white and red wire on the car is connected to the white module wire and the brown module wire. The white and green wire on the car is connected to the grey and the orange module wires. Quote Link to comment Share on other sites More sharing options...
cs2000 Posted September 5, 2018 Share Posted September 5, 2018 (edited) Thanks for the update guys, il reference my PM and update the instructions, at least we/i have confirmation! Current list is as follows 1. alfa_owner (2x) - Deposit Received 2. craigmdennis - Posted 3. StuZGT - Posted 4. baileydom - Posted 5. Kryptek49 - Posted 6. Jack94 - Posted 7. PabloVC - Paid 8. Jcurtis - Deposit Received 9. Skate2create - Posted 10. Nelly64 (2x) - Paid 11. Luke2208 - Posted 12. btoms350z - Posted Still got 2 of these in stock and ready to go at the moment, will have to order some more shortly if people still want these moving forwards. Edited September 5, 2018 by cs2000 Quote Link to comment Share on other sites More sharing options...
cs2000 Posted September 6, 2018 Share Posted September 6, 2018 (edited) Any HR/DE owners out there who haven't installed this yet, I have uploaded new instructions to the web server. If you've already downloaded the instructions, I suggest downloading them again as the wiring should now be 100% thanks to advice from Bailydom, Jack94 and taybo 1. alfa_owner (2x) - Deposit Received 2. craigmdennis - Posted 3. StuZGT - Posted 4. baileydom - Posted 5. Kryptek49 - Posted 6. Jack94 - Posted 7. PabloVC - Posted 8. Jcurtis - Paid 9. Skate2create - Posted 10. Nelly64 (2x) - Posted 11. Luke2208 - Posted 12. btoms350z - Posted @Jcurtis - I have your money but i dont have your address, module is all ready to go as soon as i knpow where im sending it. @alfa_owner - Guessing you're away on holiday or something, still waiting for payment from you mate As mentioned, got these in stock now, so have them ready to go next day ! Edited September 7, 2018 by cs2000 Quote Link to comment Share on other sites More sharing options...
StuZGT Posted September 7, 2018 Share Posted September 7, 2018 Very easy to fit. Works like a charm in my DE. Thanks for all your hard work Chris, & Flyboy. Quote Link to comment Share on other sites More sharing options...
Jcurtis Posted September 8, 2018 Share Posted September 8, 2018 On 06/09/2018 at 16:42, cs2000 said: Any HR/DE owners out there who haven't installed this yet, I have uploaded new instructions to the web server. If you've already downloaded the instructions, I suggest downloading them again as the wiring should now be 100% thanks to advice from Bailydom, Jack94 and taybo 1. alfa_owner (2x) - Deposit Received 2. craigmdennis - Posted 3. StuZGT - Posted 4. baileydom - Posted 5. Kryptek49 - Posted 6. Jack94 - Posted 7. PabloVC - Posted 8. Jcurtis - Paid 9. Skate2create - Posted 10. Nelly64 (2x) - Posted 11. Luke2208 - Posted 12. btoms350z - Posted @Jcurtis - I have your money but i dont have your address, module is all ready to go as soon as i knpow where im sending it. @alfa_owner - Guessing you're away on holiday or something, still waiting for payment from you mate As mentioned, got these in stock now, so have them ready to go next day ! Thanks matey, just PM’d. I’m away with work so been distracted sorry. I’m not home until next Friday so no mega rush to post either if that helps. Quote Link to comment Share on other sites More sharing options...
cs2000 Posted September 10, 2018 Share Posted September 10, 2018 Perfect, thanks! I didnt want you sat there thinking i had ripped you off or something, thats all! haha. Quote Link to comment Share on other sites More sharing options...
Luke2208 Posted September 13, 2018 Share Posted September 13, 2018 Fitted mine yesterday! Was easy fitting and worked bang on. Thanks very much! Quote Link to comment Share on other sites More sharing options...
skate2create Posted September 15, 2018 Share Posted September 15, 2018 Finally got round to fitting to my DE, all spot on. Cheers Chris (and Flyboy) Quote Link to comment Share on other sites More sharing options...
cs2000 Posted September 16, 2018 Share Posted September 16, 2018 No worries guys, glad you've all got on well. Still waiting for @alfa_owner but I think he doesn't know these are ready since nobody is getting email notifications on the forum at the moment! Other than his two, I have 2 currently in stock ready to go Quote Link to comment Share on other sites More sharing options...
alfa_owner Posted September 21, 2018 Share Posted September 21, 2018 sorry i'm slacking! Pm'd you now! 1 Quote Link to comment Share on other sites More sharing options...
cs2000 Posted September 26, 2018 Share Posted September 26, 2018 (edited) 1. alfa_owner - Posted 2. craigmdennis - Posted 3. StuZGT - Posted 4. baileydom - Posted 5. Kryptek49 - Posted 6. Jack94 - Posted 7. PabloVC - Posted 8. Jcurtis - Posted 9. Skate2create - Posted 10. Nelly64 (2x) - Posted 11. Luke2208 - Posted 12. btoms350z - Posted finally managed to to get everyone sorted now got 3 of these available in stock ready to go still Edited September 26, 2018 by cs2000 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.