flyboy Posted January 5, 2013 Share Posted January 5, 2013 (edited) I have now finished sorting the wiring detail on the mirror fold module for the UK 350Z. There is now no need to remove the metal door panel or glass Access to the locking solenoid circuit now recomended from behind the speaker. For anyone interested they will cost £42.50 Plus postage and packaging. ( first class signed for) There have been some issues due to not being able to find a clean 12v signal to the solenoid which locks the door. There is a unique signal/wire for the unlock, but the wire which carries the 12v lock voltage also carries a 12v pulse on the unlock command. This has been confusing the issue and I have had to come up with a work around to the normal module, hence the delay and difficulty. I have the module working in the following format with the Mirror Switch in the off (Centre) position With the Ignition off when the doors are locked with either the key-fob or internal switch, the mirrors fold in. With the ignition on (or Acc Circuit on) the device is inhibited and locking the doors will not fold the mirrors. (This is to prevent the mirrors folding if the doors are locked when driving.) With the ignition off when doors are unlocked the mirrors stay folded. When the ignition is switched on (or Acc Circuit switched on) the mirrors unfold. Switching the ignition off then locking the doors folds the mirrors once again. The manual button for folding and unfolding the mirrors works as normal when the ignition is on or Acc circuit is on. This allows the mirrors to be folded while driving if needs be, to get through a tight gap etc. There is no need to glue a switch to the locking mechanism in the door, access to the locking solenoid circuit now recomended from behind the speaker. There is now no need to remove the metal door panel or glass The module is a sealed self contained "black box" with an external 15A fuse protection. There are 8 wires which need to be connected to the wiring loom within the door/doorcard. 4 of these are connected with Scotch block connectors, and 4 go one to each end of 2 existing wires which have to be cut. These are provided with bullet connectors. A full colour coded wiring diagram and fitting instructions will be provided with each kit. I will try to get a photo guide posted but to be honest if you cant do this from a wiring diagram with good written instructions then photos wont help much. Edited April 14, 2017 by flyboy Quote Link to comment Share on other sites More sharing options...
jamesdean Posted January 5, 2013 Share Posted January 5, 2013 yes ill have one please pm me details Quote Link to comment Share on other sites More sharing options...
Paddy78 Posted January 6, 2013 Share Posted January 6, 2013 I would like one please! Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted January 6, 2013 Share Posted January 6, 2013 I'll have one, too, please. Quote Link to comment Share on other sites More sharing options...
SteveW Posted January 6, 2013 Share Posted January 6, 2013 (edited) I'll take one please I'm in Edited January 6, 2013 by SteveW Quote Link to comment Share on other sites More sharing options...
Pnthrblkzs Posted January 6, 2013 Share Posted January 6, 2013 Count me in , thanks for the PM Although it means I'll have to fix my sticky passenger wing mirror, why do these things happen a week after your warranty expires? Quote Link to comment Share on other sites More sharing options...
GazS14 Posted January 6, 2013 Share Posted January 6, 2013 I'll take one please! Quote Link to comment Share on other sites More sharing options...
cs2000 Posted January 6, 2013 Share Posted January 6, 2013 So just to clarify. To fit this the door card has to come off aswell as the internal metal sheet and the door glass needs to come out? Quote Link to comment Share on other sites More sharing options...
drfeelgood73 Posted January 6, 2013 Share Posted January 6, 2013 I will take one as well please... Let me know payment details.... Thanks Quote Link to comment Share on other sites More sharing options...
Greg Warnes Posted January 6, 2013 Share Posted January 6, 2013 I would like one please, please advise payment details when required. Quote Link to comment Share on other sites More sharing options...
pbomb Posted January 6, 2013 Share Posted January 6, 2013 Good work mate. Are you still planning to do a regional fitting service? Quote Link to comment Share on other sites More sharing options...
flyboy Posted January 6, 2013 Author Share Posted January 6, 2013 (edited) So just to clarify. To fit this the door card has to come off aswell as the internal metal sheet and the door glass needs to come out? No not now i have realised you just take out the speaker To get to the solenoid wire Edited February 17, 2013 by flyboy Quote Link to comment Share on other sites More sharing options...
flyboy Posted January 6, 2013 Author Share Posted January 6, 2013 Good work mate. Are you still planning to do a regional fitting service? Depends on how many people in which areas, to make it worthwhile. I would certainly be able to fit one for you if you came up to the Midlands. Would need to be fine weather though as I don't have a garage (Its is now an office and utility room) Quote Link to comment Share on other sites More sharing options...
pbomb Posted January 6, 2013 Share Posted January 6, 2013 Definitely interested in having the kit fitted mate. Let me know if you get a few people in south London area Quote Link to comment Share on other sites More sharing options...
Keyser Posted January 6, 2013 Share Posted January 6, 2013 I'll have one Anyone near me needs it fitted BRING DOUGHNUTS! Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted January 6, 2013 Share Posted January 6, 2013 Good that someone has picked this up, I had the original one which I made myself and then the cookbot one... It is one of the mods that you just get used to, I find it very handy to check if I locked the car or not.... Quote Link to comment Share on other sites More sharing options...
glrnet Posted January 6, 2013 Share Posted January 6, 2013 +1^^ Quote Link to comment Share on other sites More sharing options...
The Bounty Bar Kid Posted January 6, 2013 Share Posted January 6, 2013 I'll have one Anyone near me needs it fitted BRING DOUGHNUTS! Any particular type of doughnuts? Ring or creme filled? I know Dave loves both types. On a serious note. Cost of doughnuts to get this fitted and I get to visit the ZedShed makes this ever so appealing to purchase! Deal breaker... Do I get a sticker if I come down? Quote Link to comment Share on other sites More sharing options...
Aliensurfer Posted January 6, 2013 Share Posted January 6, 2013 Out of interest, how much would you charge for fitting if I came down to the Midlands? (I spend my life on the road, so am bound to be there at some point anyway!) Quote Link to comment Share on other sites More sharing options...
Ebized Posted January 6, 2013 Share Posted January 6, 2013 It would be nice if this could work on the 370s, pleaseeeeeeeeeeeeeeeeeeeeee Quote Link to comment Share on other sites More sharing options...
flyboy Posted January 6, 2013 Author Share Posted January 6, 2013 (edited) AlienSurfer As I don't have a sweet tooth for doughnuts then hows about lunch in the local? Edited January 6, 2013 by flyboy Quote Link to comment Share on other sites More sharing options...
Beb Posted January 6, 2013 Share Posted January 6, 2013 Another one here! Quote Link to comment Share on other sites More sharing options...
ChrisS Posted January 6, 2013 Share Posted January 6, 2013 It would be nice if this could work on the 370s, pleaseeeeeeeeeeeeeeeeeeeeee Especially as he and his good lady go walking around my area. :wink: Quote Link to comment Share on other sites More sharing options...
flyboy Posted January 6, 2013 Author Share Posted January 6, 2013 It would be nice if this could work on the 370s, pleaseeeeeeeeeeeeeeeeeeeeee Send me your wiring diagram of the 370 or I can send you a schematic diagram of how the unit is fitted and we can have a look!! Quote Link to comment Share on other sites More sharing options...
Keyser Posted January 6, 2013 Share Posted January 6, 2013 I'll have one Anyone near me needs it fitted BRING DOUGHNUTS! Any particular type of doughnuts? Ring or creme filled? I know Dave loves both types. On a serious note. Cost of doughnuts to get this fitted and I get to visit the ZedShed makes this ever so appealing to purchase! Deal breaker... Do I get a sticker if I come down? krispy kreme Due to popular demand and a lot of visitors we ran out - but more are in the pipeline and if you visits and have something done to your Zed the yup you get a sticker Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.