Richf Posted October 14, 2016 Share Posted October 14, 2016 Should probably edit #21 Owner ??? - 370z GT Edition Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on ark grip exhaust: 469bhp, 350 lb/ft Quote Link to comment Share on other sites More sharing options...
P15UL T Posted January 10, 2017 Share Posted January 10, 2017 1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD 2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine 3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine 4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine 5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine 6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley 7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine 10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs: 11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine 12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs 13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi... 14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft 15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k 16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley 19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs 20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque 21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft 22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq. 23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar 24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft. 25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft Quote Link to comment Share on other sites More sharing options...
wizard Posted May 17, 2017 Author Share Posted May 17, 2017 Any updates to this my friends? Quote Link to comment Share on other sites More sharing options...
nissanman312 Posted May 17, 2017 Share Posted May 17, 2017 I'll put mine on later There's a couple on there been sold aswell Djaw and Vlad Quote Link to comment Share on other sites More sharing options...
jumping350 Posted May 17, 2017 Share Posted May 17, 2017 I forgot about this will add mine later also Quote Link to comment Share on other sites More sharing options...
Keyser Posted May 17, 2017 Share Posted May 17, 2017 1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD 2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine 3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine 4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine 5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine 6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley 7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine 10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs: 11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine 12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs 13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi... 14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft 15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k 16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley 19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs 20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque 21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft 22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq. 23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar 24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft. 25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) Quote Link to comment Share on other sites More sharing options...
mattross1313 Posted May 17, 2017 Share Posted May 17, 2017 8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) Got 2 now? Can't keep up with you 1 Quote Link to comment Share on other sites More sharing options...
Keyser Posted May 17, 2017 Share Posted May 17, 2017 8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) Got 2 now? Can't keep up with you My Bad I saw this version - 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft Delete number 8 as it will never be back on the road it's been stripped - I just looked at the last page and saw my entry correctly listed as sold but not the new one in it - to lazy to read back (O and I've lost 5 hp ) 1 Quote Link to comment Share on other sites More sharing options...
Wasso Posted May 17, 2017 Share Posted May 17, 2017 8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) Got 2 now? Can't keep up with you My Bad I saw this version - 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft Delete number 8 as it will never be back on the road it's been stripped - I just looked at the last page and saw my entry correctly listed as sold but not the new one in it - to lazy to read back (O and I've lost 5 hp ) Also too lazy to get your torque figures since post number 8 1 Quote Link to comment Share on other sites More sharing options...
Keyser Posted May 17, 2017 Share Posted May 17, 2017 (edited) 8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) Got 2 now? Can't keep up with you My Bad I saw this version - 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft Delete number 8 as it will never be back on the road it's been stripped - I just looked at the last page and saw my entry correctly listed as sold but not the new one in it - to lazy to read back (O and I've lost 5 hp ) Also too lazy to get your torque figures since post number 8 You can bog off an all - you don't even have an FI Zed Edit: you can go and start your own list of LS3 V8 zeds then it will be a lits of you and ALL your mates Edited May 17, 2017 by Keyser Quote Link to comment Share on other sites More sharing options...
Wasso Posted May 17, 2017 Share Posted May 17, 2017 To be fair there's a lot of talk with folk looking at V8's these days.... don't worry all you lot do is blow your engines, strip them, or sell them. Not much of a success.... Still..... I am heavily curious to FI.... you can't get rid of me THAT easily! Quote Link to comment Share on other sites More sharing options...
Keyser Posted May 17, 2017 Share Posted May 17, 2017 To be fair there's a lot of talk with folk looking at V8's these days.... don't worry all you lot do is blow your engines, strip them, or sell them. Not much of a success.... Still..... I am heavily curious to FI.... you can't get rid of me THAT easily! No but we can try FI it - everyone needs 750HP 1 Quote Link to comment Share on other sites More sharing options...
evilscorp Posted May 17, 2017 Share Posted May 17, 2017 Mine should be rwhp =??? Also chubbyninja's engine is dead and being rebuilt. Quote Link to comment Share on other sites More sharing options...
tony420z Posted May 28, 2017 Share Posted May 28, 2017 (edited) To be fair there's a lot of talk with folk looking at V8's these days.... don't worry all you lot do is blow your engines, strip them, or sell them. Not much of a success.... Still..... I am heavily curious to FI.... you can't get rid of me THAT easily! No but we can try FI it - everyone needs 750HP 750hp nice😊 Edited May 28, 2017 by tony420z Quote Link to comment Share on other sites More sharing options...
taybo Posted September 4, 2017 Share Posted September 4, 2017 (edited) 1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD 2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine 3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine 4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine 5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine 6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley 7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine 10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs: 11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine 12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs 13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi... 14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft 15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k 16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley 19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs 20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque 21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft 22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq. 23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar 24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft. 25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) 27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft Edited September 4, 2017 by taybo Quote Link to comment Share on other sites More sharing options...
scobie140 Posted September 5, 2017 Share Posted September 5, 2017 1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD 2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine 3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine 4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine 5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine 6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley 7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine 10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs: 11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine 12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs 13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi... 14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft 15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k 16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley 19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs 20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque 21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft 22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq. 23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar 24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft. 25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) 27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft 28. Scobie140 - 350z DE Stock block, Vortech V3 3.12" pulley 405bhp @hubs 340lb/ft Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted September 5, 2017 Share Posted September 5, 2017 Okay, time for an update on # 23 above. Since the installation of Syvecs S6+ and also bigger turbos and new HKS actuators, the numbers at present are circa 720bhp at the wheels and circa 680 lbs ft at 1.6 bar. The 2 rotary switches provide 12 boost settings and 12 traction settings. It is still a work in progress, however getting there slowly. 2 Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted September 5, 2017 Share Posted September 5, 2017 10 hours ago, scobie140 said: 1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD 2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine 3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine 4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine 5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine 6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley 7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine 10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs: 11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine 12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs 13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi... 14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft 15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k 16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley 19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs 20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque 21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft 22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq. 23: ZMANALEX - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar Syvecs S6+ 720bhp at the hubs and 680 lbs ft. at 1.6 bar: Work in progress: 24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft. 25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) 27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft 28. Scobie140 - 350z DE Stock block, Vortech V3 3.12" pulley 405bhp @hubs 340lb/ft Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted September 5, 2017 Share Posted September 5, 2017 1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD 2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine 3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine 4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine 5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine 6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley 7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine 10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs: 11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine 12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs 13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi... 14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft 15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k 16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley 19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs 20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque 21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft 22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq. 23: ZMANALEX - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar Syvecs S6+ 720bhp at the hubs and 680 lbs ft. at 1.6 bar: Work in progress: 24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft. 25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) 27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft 28. Scobie140 - 350z DE Stock block, Vortech V3 3.12" pulley 405bhp @hubs 340lb/ft Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted September 5, 2017 Share Posted September 5, 2017 GREAT EXPECTATIONS Quote Link to comment Share on other sites More sharing options...
andy james Posted September 5, 2017 Share Posted September 5, 2017 31 minutes ago, ZMANALEX said: Okay, time for an update on # 23 above. Since the installation of Syvecs S6+ and also bigger turbos and new HKS actuators, the numbers at present are circa 720bhp at the wheels and circa 680 lbs ft at 1.6 bar. The 2 rotary switches provide 12 boost settings and 12 traction settings. It is still a work in progress, however getting there slowly. Nice one Alex. shame us HR owners can't get near those numbers. Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted September 5, 2017 Share Posted September 5, 2017 13 minutes ago, andy james said: Nice one Alex. shame us HR owners can't get near those numbers. You can, with the AAM TT kit, as you have your engine forged already Quote Link to comment Share on other sites More sharing options...
TT350 Posted November 26, 2017 Share Posted November 26, 2017 S/C vastly outnumber T/TT. Why. Quote Link to comment Share on other sites More sharing options...
Snjur Posted November 26, 2017 Share Posted November 26, 2017 1 minute ago, TT350 said: S/C vastly outnumber T/TT. Why. Probably more affordable, less running issues, easier to fit and so Quote Link to comment Share on other sites More sharing options...
wizard Posted January 10, 2018 Author Share Posted January 10, 2018 I posted this thread back in 2013, it's still running and yet it's still not sticky, can an admin do that? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.