GT4 Zed Posted October 3, 2012 Share Posted October 3, 2012 Looking for the fascia or trim panel to fit my poineer double Din sat-nav. I am not 100% happy with the trim i have which looks OEM but the fitting is not perfect and hoping someone would have a recommendation. The HU is the AVIC D3. Looked at this but want be sure this is what i need before i pull the trigger. http://incartec.co.uk/Pages/Product.aspx?P=2793 Cheers pips Quote Link to comment Share on other sites More sharing options...
AFTERSHOX Posted October 3, 2012 Share Posted October 3, 2012 I used the InCarTec Fascia 50-306 [DOUBLE-DIN FASCIA KIT (for MY2006 > ONWARDS)] in my HU install - see thread > viewtopic.php?f=27&t=58783 To be honest - none of the fascia kits are a 100% match to OEM (see the photos in my thread); ...and all of them end up with a small gap between the fascia and HU. The manufacturer supplies their own 'finisher' trim - but you'll likely not be able to use that without either modifying the ICT Fascia (would require cutting down) - or you just leave the manufacturer's 'finisher' surround trim off completely; (dump it!) If you take your time - when fitting the HU - I used little pieces of card around the HU to get a symmetrical 'gap' around the HU - the end result will be pretty good. I know some forum members have used things like 'foam tape' to close the gap between the HU and the fascia; but TBH - if you get the HU central to the fascia - it will look nice and neat. Good luck - and I'm sure the other forum members will be along soon to contribute their valuable advice. Cheers M 100th POST - Hurrah ! Quote Link to comment Share on other sites More sharing options...
ChrisS Posted October 3, 2012 Share Posted October 3, 2012 Must have changed your exhaust if you going to listen to music. Quote Link to comment Share on other sites More sharing options...
GT4 Zed Posted October 3, 2012 Author Share Posted October 3, 2012 Must have changed your exhaust if you going to listen to music. yes Chris. I'm milltek'ed up and can hear again hence the stereo/ nav. Wales will never be the same again. @ aftershox. Thanks will take your advice. Will try to refit after I get my volume issue sorted. Quote Link to comment Share on other sites More sharing options...
DannyBoy Posted October 3, 2012 Share Posted October 3, 2012 Have to agree with what's been said, I've tried the incartec pioneer fascia too and couldn't get it to fit at all. A neat gap is probably the best you can hope for without fabricating a custom fascia. DB Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted October 3, 2012 Share Posted October 3, 2012 Welcome to the Milltek club Bennett Is there a gap at the bottom of the fascia? Some Pioneer units are an odd size! Quote Link to comment Share on other sites More sharing options...
bhavin85 Posted October 3, 2012 Share Posted October 3, 2012 the facia in the link is the one I brought...so no point in wasting your money bud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.