Mark@Abbey m/s Posted September 19, 2012 Share Posted September 19, 2012 Had a 370Z brought to us with a Stillen bolt on Supercharger kit already fitted the car also had a full Stillen exhaust fitted (stock cats) Stillen oil and gear box cooler (Auto car) The tune in the car when it arrived was far to rich and it was removing timing due to picking up detonation; Took sometime to tune the car but after sometime on the Dynapack all was okay; By abbeymotorsport at 2012-09-19 By abbeymotorsport at 2012-09-19 By abbeymotorsport at 2012-09-19 The Stillen kit gives the same sort of bhp numbers to the GTM Stage 1 kit we have fitted but the torque is down , maybe due to the Auto and the way the auto's need tuning, but the car drive very nicely very strong at high RPM and drives like a stock car in traffic. Nice conversion. Quote Link to comment Share on other sites More sharing options...
HaydnH Posted September 19, 2012 Share Posted September 19, 2012 but the car drive very nicely very strong at high RPM and drives like a stock car in traffic. I hope not! Out of curiosity, does the 370Z Stillen kit still need an after market bonnet like the 350Z kit? Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted September 19, 2012 Author Share Posted September 19, 2012 Ha ha. Should of said like a Stock car. No it fits under a stock bonnet. Quote Link to comment Share on other sites More sharing options...
bronzee Posted September 30, 2012 Share Posted September 30, 2012 As it's been mentioned in your thread already. Apart from the Stillen (for left hand drive) oil cooler, what other good oil cooler options are there for right hand drive 370's??? Most of the ones I've read about are left hand drive ones. Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted October 1, 2012 Author Share Posted October 1, 2012 We build our own kit , but the LHD kits will fit on a RHD car. Stillen thou remove the PAS cooler fitted as standard locate the Oil cooler kit in this position then sell you another PAS kit to fit. we just fit our oil cooler in another position. Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.