Yella Fella Posted August 29, 2012 Posted August 29, 2012 Right, I've finally got round to grounding the wires as per Lexx's thread, all parts bought from incartec too. However the HU now comes on, but no sound, even connecting the RCA cables. I know the speakers etc work as I've pulled out the Kenwood double din HU that was in there prior. The steering remotes work too, power gets saved, just no sound. Really can't figure it out, I never been this baffled with car audio till I had come across the Z! Any ideas? Gonna try again over the weekend Quote
Ian Posted August 29, 2012 Posted August 29, 2012 Remote amp connected? Its the blue/white cable Quote
Yella Fella Posted August 29, 2012 Author Posted August 29, 2012 Remote amp connected? Its the blue/white cable Where does that connect to from the ICT loom as that wire is still loose? Is it literally to the remote wire from the head unit's own remote blue wire? Quote
buster Posted August 29, 2012 Posted August 29, 2012 Needs to be connected to the blue wire on the rear of the stereo. Quote
spursmaddave Posted August 29, 2012 Posted August 29, 2012 Common mistake don't worry your not alone The remote wire sends a signal to the Bose amp to wake it up so that is why there is no sound, the Bose amp is sleeping.... from memory my old Pioneer HU had a dedicated remote wire which I think was blue and as said connect it to the blue/white wire from the loom Quote
Yella Fella Posted August 29, 2012 Author Posted August 29, 2012 I'm blaiming the previous installer as all my previous ICE setups were done by myself... I can't believe I have missed this out Well the original Pioneer loom has bullet connectors, so I'll get my friend to splice an additional part to it. Never have I had to splice/bullet up so many parts to a car's stereo loom before! Quote
Yella Fella Posted September 1, 2012 Author Posted September 1, 2012 Just to let you all know, connecting the blue/white cable to the head unit ISO loom's remote on, has worked! Ta-da music, cheers guys Quote
Yella Fella Posted September 1, 2012 Author Posted September 1, 2012 Just to let you all know, connecting the blue/white cable to the head unit ISO loom's remote on, has worked! Ta-da music, cheers guys Quote
glrnet Posted September 1, 2012 Posted September 1, 2012 What he really meant was "told you so" Glad you got it sorted Quote
buster Posted September 1, 2012 Posted September 1, 2012 What he really meant was "told you so" Glad you got it sorted well done m8 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.