taffyjason Posted July 26, 2012 Share Posted July 26, 2012 Since my wonderful K2 system decided to rattle like a mofo and rust badly, along with astonishingly poor customer service from said supplier, now on a market for a new pipe and back box to go with my Berk HFC's and the Stillen Y pipe. Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted July 26, 2012 Share Posted July 26, 2012 We have a few new options to choose from - http://cougarstore.co.uk/index.php?main ... cPath=1_10 The Cobra exhaust that we offer would be a good replacement for the K2 you currently have fitted... Quote Link to comment Share on other sites More sharing options...
taffyjason Posted July 26, 2012 Author Share Posted July 26, 2012 i have been perusing your options for a while now, would like something slightly quieter than my crapspeed though, tired of my eyes going blurry at 1800rpm! Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted July 26, 2012 Share Posted July 26, 2012 Cobra resonated version would be good, or for less volume and one that would compliment the berks would be the Milltek exhaust that we also offer... Quote Link to comment Share on other sites More sharing options...
planetsurfer2 Posted July 26, 2012 Share Posted July 26, 2012 Miltek... Only loud when you boot it. I went through the really stupidly loud exhaust stage. Loosened my fillings and gave me migraines. My boss could feel the rumble when I started my car about 1KM away. He's a bass guitarist in a speed metal band. A tribe not renown as having any kind of hearing ability. I like my car better now Quote Link to comment Share on other sites More sharing options...
taffyjason Posted July 26, 2012 Author Share Posted July 26, 2012 seems Miltec is getting the thumbs up, i go away to sandy places soon, ideas to spend my saved pennies on when im back, just tired of being embarrassed pulling away like my car is falling to bits with the rattle! Quote Link to comment Share on other sites More sharing options...
coldel Posted July 26, 2012 Share Posted July 26, 2012 Milltek + HFCs + CAI gives a great sound Quiet at low revs, a nice sporty note at around 3k revs and up Quote Link to comment Share on other sites More sharing options...
taffyjason Posted July 26, 2012 Author Share Posted July 26, 2012 ive not heard of CAI...whats the gen? Quote Link to comment Share on other sites More sharing options...
coldel Posted July 26, 2012 Share Posted July 26, 2012 Cold Air Intake Quote Link to comment Share on other sites More sharing options...
taffyjason Posted July 26, 2012 Author Share Posted July 26, 2012 ahhhhhhhhh....im avoiding those, gone through some very deep puddles recently! Quote Link to comment Share on other sites More sharing options...
Tarmac@TarmacSportz Posted July 26, 2012 Share Posted July 26, 2012 ahhhhhhhhh....im avoiding those, gone through some very deep puddles recently! Short ram, JWT or Stillen like Col has. How about a single exit ? I'm sure I can look after you being as you have been a good customer Quote Link to comment Share on other sites More sharing options...
taffyjason Posted July 26, 2012 Author Share Posted July 26, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Quote Link to comment Share on other sites More sharing options...
Tarmac@TarmacSportz Posted July 26, 2012 Share Posted July 26, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Greddy SE, that's just a back box and would suit your set up nicely. Scorpion are working on a system with rolled tips, that sounds great with the Ypipe and Berks. Might be a wait though Quote Link to comment Share on other sites More sharing options...
coldel Posted July 26, 2012 Share Posted July 26, 2012 Greddy SE looks and sounds stunning, not a bad choice if you are happy to fork out for the rest of the exhaust Quote Link to comment Share on other sites More sharing options...
KyleR Posted July 26, 2012 Share Posted July 26, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Greddy SE, that's just a back box and would suit your set up nicely. Scorpion are working on a system with rolled tips, that sounds great with the Ypipe and Berks. Might be a wait though It's a shame Scorpion can't just make their system with rolled tips. They have a good quality system but I just don't like the jap style slashed tips. Quote Link to comment Share on other sites More sharing options...
Tarmac@TarmacSportz Posted July 27, 2012 Share Posted July 27, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Greddy SE, that's just a back box and would suit your set up nicely. Scorpion are working on a system with rolled tips, that sounds great with the Ypipe and Berks. Might be a wait though It's a shame Scorpion can't just make their system with rolled tips. They have a good quality system but I just don't like the jap style slashed tips. That's what I'm saying Kyle. I suggested it earlier on in the year and they are working on it Quote Link to comment Share on other sites More sharing options...
KyleR Posted July 27, 2012 Share Posted July 27, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Greddy SE, that's just a back box and would suit your set up nicely. Scorpion are working on a system with rolled tips, that sounds great with the Ypipe and Berks. Might be a wait though It's a shame Scorpion can't just make their system with rolled tips. They have a good quality system but I just don't like the jap style slashed tips. That's what I'm saying Kyle. I suggested it earlier on in the year and they are working on it You'd think there would be no working to be done, just roll the freaking tips and send it out, it's not like it takes months of research to figure out how to roll a bit of stainless Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted July 27, 2012 Share Posted July 27, 2012 lots of options, milltek is nice as are the tarmac options, think its a case of choose your exhaust then choose a suitable supplier. Quote Link to comment Share on other sites More sharing options...
taffyjason Posted July 27, 2012 Author Share Posted July 27, 2012 yeah, that's the fun! all i get from Japspeed is cut and paste replies, 3 times ive messaged and each time exactly the same message comes back...how's that for personal service! Quote Link to comment Share on other sites More sharing options...
Tarmac@TarmacSportz Posted July 27, 2012 Share Posted July 27, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Greddy SE, that's just a back box and would suit your set up nicely. Scorpion are working on a system with rolled tips, that sounds great with the Ypipe and Berks. Might be a wait though It's a shame Scorpion can't just make their system with rolled tips. They have a good quality system but I just don't like the jap style slashed tips. That's what I'm saying Kyle. I suggested it earlier on in the year and they are working on it You'd think there would be no working to be done, just roll the freaking tips and send it out, it's not like it takes months of research to figure out how to roll a bit of stainless Tell me about it Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted July 27, 2012 Share Posted July 27, 2012 The greddy or the tannabe would be top of my list. qulaity systems from a well known brand Quote Link to comment Share on other sites More sharing options...
taffyjason Posted August 5, 2012 Author Share Posted August 5, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Greddy SE, that's just a back box and would suit your set up nicely. Scorpion are working on a system with rolled tips, that sounds great with the Ypipe and Berks. Might be a wait though It's a shame Scorpion can't just make their system with rolled tips. They have a good quality system but I just don't like the jap style slashed tips. What's the effect of rolled over non rolled tips then? is it just style or is there difference in sound? Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted August 5, 2012 Share Posted August 5, 2012 not sure i could go down a single exit route, would feel like my testis cut in half ! Greddy SE, that's just a back box and would suit your set up nicely. Scorpion are working on a system with rolled tips, that sounds great with the Ypipe and Berks. Might be a wait though It's a shame Scorpion can't just make their system with rolled tips. They have a good quality system but I just don't like the jap style slashed tips. What's the effect of rolled over non rolled tips then? is it just style or is there difference in sound? It won't affect sound, just for aesthetics... Quote Link to comment Share on other sites More sharing options...
taffyjason Posted August 5, 2012 Author Share Posted August 5, 2012 ahhhhhhh thought as much Quote Link to comment Share on other sites More sharing options...
ewan221 Posted August 5, 2012 Share Posted August 5, 2012 Do you have a decent SS exhaust place local ? u might find they will do a custom job for a very decent price. A mate had one done for his Cerbera absolute cracking job and cheaper than buying from the usual brands. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.