flyboy Posted June 21, 2012 Share Posted June 21, 2012 (edited) I have a New Auto Mirror Fold Module on test at the moment, but fine so far..... In the absence of Cookbot and his module and continued interest in this popular mod I thought I would release this if enough people were interested. It is similar to the previous module but there is no micro switch to fit as it works off the pulsed signal to lock/unlock the doors. It also has an added bonus of an auto protection mode where if the doors are locked/unlocked too many times in a short period of time then it goes into protection mode and the mirror motors stop folding/unfolding for a while. Therefore its an easier mod to install. It comes in a neat plastic box with a fuse protection and full wiring diagram/instructions. I will also post a picture guide to fitting in the guides section. Price will be around the £30-£35 mark depending on interest. I would be looking for around 10 people to get this going and could probably put a further 10 in stock myself. Please show your interest below. 1. Steve W 2. Squit 3. Paddy 78 4. drysd4le 5. B3n5253 6. onthatBOMBSHELL 7. 313GT 8. Wackosr 9. Darren-Z 10. This could is offered as a DIY product but could be fitted on request for a fee. Thanks for looking Flyboy Edited January 5, 2013 by flyboy Link to comment Share on other sites More sharing options...
SteveW Posted June 21, 2012 Share Posted June 21, 2012 Hi mate if this works i'd be interested. Link to comment Share on other sites More sharing options...
squit Posted June 21, 2012 Share Posted June 21, 2012 Hi mate if this works i'd be interested. Same here Link to comment Share on other sites More sharing options...
Clown Posted June 21, 2012 Share Posted June 21, 2012 Where would we need to go to get them fitted? Link to comment Share on other sites More sharing options...
flyboy Posted June 21, 2012 Author Share Posted June 21, 2012 Where would we need to go to get them fitted? Im in the midlands but its possible I could get a regional fitting service sorted out. Link to comment Share on other sites More sharing options...
Paddy78 Posted June 22, 2012 Share Posted June 22, 2012 I've been thinking about doing this mod for ages, so if it works and saves me the hassle of getting the correct wires etc., then I'm in. Link to comment Share on other sites More sharing options...
drysd4le Posted June 22, 2012 Share Posted June 22, 2012 If this is a go ahead I am interested as well! soumds good been thinking of doing it for a while. Link to comment Share on other sites More sharing options...
B3n5253 Posted June 22, 2012 Share Posted June 22, 2012 I would be up for one of these. Link to comment Share on other sites More sharing options...
onthatB0MBSHELL Posted June 22, 2012 Share Posted June 22, 2012 I`m interested also Link to comment Share on other sites More sharing options...
mc Posted June 22, 2012 Share Posted June 22, 2012 Is it still installed behind the door card? Link to comment Share on other sites More sharing options...
p40ulw Posted June 22, 2012 Share Posted June 22, 2012 i will take these please! i know my profile says i live in cornwall (which i do) but im from the midlands also! so could i please get them fitted asdwell? thank you please! Link to comment Share on other sites More sharing options...
Maccaman Posted June 22, 2012 Share Posted June 22, 2012 Hi Martin, count me in with fitting please. Link to comment Share on other sites More sharing options...
wackosr Posted June 22, 2012 Share Posted June 22, 2012 I'm interested, especially if it come with a wiring/fitting guide Link to comment Share on other sites More sharing options...
Darren_Z Posted June 22, 2012 Share Posted June 22, 2012 I'm interested, especially if it come with a wiring/fitting guide Link to comment Share on other sites More sharing options...
flyboy Posted June 22, 2012 Author Share Posted June 22, 2012 Is it still installed behind the door card? Yup behind door card. Link to comment Share on other sites More sharing options...
onthatB0MBSHELL Posted June 29, 2012 Share Posted June 29, 2012 Any progress with the module? Link to comment Share on other sites More sharing options...
Seabee Posted June 29, 2012 Share Posted June 29, 2012 Add me in! Link to comment Share on other sites More sharing options...
flyboy Posted June 30, 2012 Author Share Posted June 30, 2012 Not ready yet as I have taken a fuse out. Needs a bit more trial time before it can be released. might be looking for a beta tester soon to help out with the trials. Link to comment Share on other sites More sharing options...
ersen.o Posted June 30, 2012 Share Posted June 30, 2012 im in, remind me tho as ill forget i made this post Link to comment Share on other sites More sharing options...
amstrange1 Posted July 5, 2012 Share Posted July 5, 2012 Also interested. Link to comment Share on other sites More sharing options...
rabster Posted July 5, 2012 Share Posted July 5, 2012 could be interested i am currently working on my own version using the pulse off the door lock circuit, i have a variable timer board that hooks in with a relay to close the mirrors i was also going to design it with the auto fold out on the alarm to i found it worked a treat on my lexus when i stupidly used to put the proximity key near the window upstairs it was just inside the range to unlock the car grrr so i fitted it to have a visual so if the car was locked they were folded in unlocked they were folded out meant i knew my baby was locked up if you want to do some head scratching im happy to share some ideas and findings what fuse did you blow ? Link to comment Share on other sites More sharing options...
Hennerz Posted July 5, 2012 Share Posted July 5, 2012 I'm very interested, especially if you are organising regional fitting Link to comment Share on other sites More sharing options...
pbomb Posted July 5, 2012 Share Posted July 5, 2012 I could also be interested in this mate if you come down to south London area to do a fitting service. I'm sure a few zed owners in my area would be up for it. Link to comment Share on other sites More sharing options...
drysd4le Posted July 12, 2012 Share Posted July 12, 2012 are we any further forward with this? Link to comment Share on other sites More sharing options...
flyboy Posted July 14, 2012 Author Share Posted July 14, 2012 are we any further forward with this? Not yet havent had the time recently to throw another half day at it to get the wiring guide done. Will try again this weekend. Link to comment Share on other sites More sharing options...
Recommended Posts