kiingsi Posted May 22, 2012 Share Posted May 22, 2012 I have just put a set of grid drifts on my z and they look amazing but the wheel nuts I have on are just silver and tatty and also are not a very good fit in the small rota hole, so I am after some gold ones to match the brembos and 19mm outside diameter as the 21mm ones I have on at the minute catch the inside of the holes. I am very sceptical about wheel nuts tho as on my old car after fitting some red alloy ones. After been out in the car for an hour or two of spirited driving I heard a knocking on the car so pulled over and to my shock one wheel nut had completely come off and at least half of them had come loose Can any body suggest some good wheel nuts? And can anybody give your opinion on these please http://www.raceways.co.uk/Motorsport_lightweight_aluminium_wheel_nuts.htm Quote Link to comment Share on other sites More sharing options...
Wasso Posted May 22, 2012 Share Posted May 22, 2012 I use the RAYS duraluminum which is aircraft grade aluminium. Had MANY a spirited drive with them and never had a problem. They don't come in gold though I'm afraid. Quote Link to comment Share on other sites More sharing options...
docwra Posted May 23, 2012 Share Posted May 23, 2012 The Rays have reinforced threads too ......... but I still wouldnt use them. To easy for a thief to remove or you to chew up, plus the obvious "What if they fall off" concern. Unfortunately alloy nuts are all going to suffer the problem so my soluton was to puch the boat out a little ............. http://www.evasivemotorsports.com/mm5/m ... ry_Code=L1 Quote Link to comment Share on other sites More sharing options...
Wasso Posted May 23, 2012 Share Posted May 23, 2012 They can pinch 4 out of 5 nuts fair comment, but that can be said about any wheel nuts. Seriously though, never had the slightest of problem and I've had them on 14 months now. I'd buy them again if needs be Quote Link to comment Share on other sites More sharing options...
Ian Posted May 23, 2012 Share Posted May 23, 2012 They can pinch 4 out of 5 nuts fair comment, but that can be said about any wheel nuts. Seriously though, never had the slightest of problem and I've had them on 14 months now. I'd buy them again if needs be Only problem I had with the RAYS nuts were the colour fading I've got Muteki nuts now which are much nicer looking Quote Link to comment Share on other sites More sharing options...
Wasso Posted May 23, 2012 Share Posted May 23, 2012 Have noticed a very slight loss in colour but nothing to speak loudly of just yet. I have recently been looking at the Leggera Kics nuts, a wider choice in colours but not sure of the quality. The chaps across the pond love them, so they must be fairly good quality? Quote Link to comment Share on other sites More sharing options...
docwra Posted May 23, 2012 Share Posted May 23, 2012 Seriously though, never had the slightest of problem and I've had them on 14 months now. Not digging at you dude, but thats like saying "This tiger must be fine with children, as it hasnt eaten any yet" - you only know about a problem after its happened. The quality of my KICs is good, but Ive started seeing a little bit of rust forming inside the lugnut, not what you expect for £200+ Quote Link to comment Share on other sites More sharing options...
Wasso Posted May 23, 2012 Share Posted May 23, 2012 Seriously though, never had the slightest of problem and I've had them on 14 months now. Not digging at you dude, but thats like saying "This tiger must be fine with children, as it hasnt eaten any yet" - you only know about a problem after its happened. The quality of my KICs is good, but Ive started seeing a little bit of rust forming inside the lugnut, not what you expect for £200+ Fair point, no tiger strikes here either Hmmm rust, that's not so great. When the Weds finally get purchased I'll probably get some of their nuts to accompany the wheels, so I'll test those before anything else I guess. Quote Link to comment Share on other sites More sharing options...
kiingsi Posted May 23, 2012 Author Share Posted May 23, 2012 Thanks, has anyone used or heard anything about these? http://www.ebay.co.uk/itm/D1-Spec-Wheel-Nuts-P1-25-Long-GOLD-NISSAN-SUBARU-NEW-/200613558714?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item2eb57ff9ba Quote Link to comment Share on other sites More sharing options...
docwra Posted May 23, 2012 Share Posted May 23, 2012 Thats exactly what Im talking about kiingsi, I actually know people who have had D1 nuts fail, I ouldnt use them on my pushbike Quote Link to comment Share on other sites More sharing options...
kiingsi Posted May 23, 2012 Author Share Posted May 23, 2012 Ok that settles that to be honest I was extremely juvious about them thus why I've been looking around. The website that you gave me looks great tho thanks. Quote Link to comment Share on other sites More sharing options...
kiingsi Posted May 23, 2012 Author Share Posted May 23, 2012 Think I'm going to go for these. Read some reviews and they seem good so there the ones. http://www.imageinmotion.com/PASSWORDJDM03-PWALN-NEC16-GLD.htm Quote Link to comment Share on other sites More sharing options...
Wasso Posted May 23, 2012 Share Posted May 23, 2012 Looks good, nice range of colours Quote Link to comment Share on other sites More sharing options...
docwra Posted May 24, 2012 Share Posted May 24, 2012 I still wouldnt, myself. "Aerospace grade" doesnt mean anything, if you do choose to go with them then tighten them up with a torque wrench. If they dont have a suggested torque setting then run away. Quote Link to comment Share on other sites More sharing options...
cmck13 Posted May 24, 2012 Share Posted May 24, 2012 Torque settings for these 80 ft lb, nicer looking finish than the D1. Quote Link to comment Share on other sites More sharing options...
Freebird Posted May 29, 2012 Share Posted May 29, 2012 Bit of a thread resurrection I know lol, but a mate of mine on the SXOC is going to order me a set of these tomorrow If you have a spare £175 knocking about you can get some rather tasty looking proper Titanium ones Link: http://www.sxoc.com/vbb/showthread.php? ... -Wheel-nut Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.