Jump to content

anyone know this 350z


k9l3

Recommended Posts

probably removed for the SC

But should still have one on , it should have the original replaced with a stillen strut brace shouldn't it ???

 

not from what i can see in the Kit

 

http://www.dirtdirectory.com/ART/produc ... harger.jpg

 

it wasn't sold with it, but some people look to have fitted something aftermarket.

 

http://blog.stillen.com/wp-content/gall ... Z-0014.jpg

 

but it looks a very back yard job, and not an off the shelf job.

Link to comment
Share on other sites

probably removed for the SC

But should still have one on , it should have the original replaced with a stillen strut brace shouldn't it ???

 

not from what i can see in the Kit

 

http://www.dirtdirectory.com/ART/produc ... harger.jpg

 

it wasn't sold with it, but some people look to have fitted something aftermarket.

 

http://blog.stillen.com/wp-content/gall ... Z-0014.jpg

 

but it looks a very back yard job, and not an off the shelf job.

 

Its an optional extra

Link to comment
Share on other sites

what about this car these are 2 i am looking at

 

http://pistonheads.co.uk/sales/3462999.htm

 

its had the rev up added could that be a bad thing as heard they had problems

 

That used to belong to 2 forum members.

 

350bhp? not a chance

 

Less lag? What lag

 

:lol:

 

i knew it wouldnt be 350 without t or sc but looks nice but with them mods will it be reliable

i see you had supercharger was it reliable?

Link to comment
Share on other sites

Should be reliable, theres nothing major there that would cause issue aslong as its been looked after.

 

Supercharger was only fitted for about 1500 miles before I sold it, it was reliable during that time though :)

 

I think you may be getting confused between Revup (Which is the 06+ engine that has had some oil issues) & Up Rev (which is an ECU flash done by Abbey, Horsham & RS Tuning) :thumbs:

Link to comment
Share on other sites

i like the stillen setup, proper old school twin screw setup, compared to the other kits which were more like turbo snail shells.

 

It makes the most amazing noise, it just doesn't make the power to make it worth while and you have to have that bonnet :thumbdown:

Link to comment
Share on other sites

i like the stillen setup, proper old school twin screw setup, compared to the other kits which were more like turbo snail shells.

 

It makes the most amazing noise, it just doesn't make the power to make it worth while and you have to have that bonnet :thumbdown:

 

i know what you mean on the bonnet,

 

they did 3 stages of tuning on stage 3 it was apparently on 410bhp don't know what stages 1 or 2 were at.

 

think stage 1 was SC only no intercooler, stage 2 was with intercooler, stage 3 must be added superman sperm or something who knows.

Link to comment
Share on other sites

Not when 350hp has cost you more than 400hp would cost you ;)

 

but for £8500 you can't complain at that price. ;)

 

I would :p

 

400hp can be done for sub £5K :p

 

then you'd need to be able to buy the Zed for £3500 to make it a competitor i know they are cheap but they aint that bad yet.

Link to comment
Share on other sites

what about this car these are 2 i am looking at

 

http://pistonheads.co.uk/sales/3462999.htm

 

its had the rev up added could that be a bad thing as heard they had problems

 

Not sure i've ever seen a more dicey ad :lol:

 

350bhp N/A? yea ok, ask Z1 how easy and cheap that is, certainly took more than a new exhaust and 'hot cams'. Also as has been said that stuff about the Uprev is just complete bull. OP I wouldn't touch that with a 10' pole. The stillen could be a good buy for 8.5k though, may only be 350bhp but that beats 276.

 

DB

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...