roadtrip Posted November 23, 2011 Share Posted November 23, 2011 Came across these which I thought might be suitable to fine tune an offset without resorting to universal cast spacers: http://www.ebay.co.uk/itm/270857273625 The TVR has the same 5x114.3 PCD as the Zed but with a 70.1mm bore and 12.7mm diameter studs compared to our 66.1mm bore and 12mm studs. Seemed like they might be close enough for Zed purposes so I bought a pair to try out: They fitted very well, almost exactly the same outer diameter as the front hub mounting face. There's a little bit of movement as you would expect but once the wheel nuts were done up finger tight it was very easy to centre on the front hub. I didn't try them on the rear, should be much the same but you'd be judging it by eye centring on the wheel face as the rear hub face is much bigger. Thought I'd share in case it helps out anyone else. I believe the seller has three pairs left or you can buy them new from here: http://www.tvrpower.co.uk/store/slug/tuscan-wheel-spacers/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.