AFTERSHOX Posted September 17, 2011 Share Posted September 17, 2011 Couple of quick questions for you knowledgeable types: Q1) Is it possible to get voice navigation from the OEM UK BirdView through an aftermarket HU? (I did search the forum, couldn't find an answer) Q2) Is it possible to re-use the existing microphone / steering wheel controls (for the Telephony) from the Bluetooth Kit on an aftermarket HU? (I don't intend to use the Nissan BT Module as the new HU will have Bluetooth) - but would like to the buttons on the steering wheel for answering calls / making calls etc.? Thanks for the help. Mark Quote Link to comment Share on other sites More sharing options...
un1eash Posted September 19, 2011 Share Posted September 19, 2011 1) This is possible as i did it with my Alpine 9886R. It wasnt a perfect solution though as i had to wire it into the aux input so you would only hear the sat nav when aux input source was selected, so no music at the same time. 2) I dont think this is possible as the steering wheel interface is setup to use the phone buttons to change tracks/folders on aftermarket headunits. Quote Link to comment Share on other sites More sharing options...
AFTERSHOX Posted September 20, 2011 Author Share Posted September 20, 2011 Hi un1eash Thanks for the reply mate. Makes sense. Regarding use of the AUX input for the SatNav AUDIO; do you get 2 x Red / White RCA connections (Left / Right Audio) FROM the Nav screen? (Somewhere behind the centre console). Assume they are easy to find once the centre console / BOSE HU is removed. Cheers Mark Quote Link to comment Share on other sites More sharing options...
un1eash Posted September 20, 2011 Share Posted September 20, 2011 The sat nav socket has wires for the audio that are as follows... Pin 18 - Navi Earth Pin 19 - Navi Input (-) Pin 20 - Navi Input (+) I wired these into a pair of phonos that then plugged into the back of my headunit. Quote Link to comment Share on other sites More sharing options...
AFTERSHOX Posted September 20, 2011 Author Share Posted September 20, 2011 un1eash - that is very helpful mate ! Thanks. Is there no other to merge the audio inputs (splitter box?) - so the NAV VOICE gets mixed with your audio source? eg. MP3 playback? Something like this? http://www.maplin.co.uk/phono-2-sockets ... able-29192 Quote Link to comment Share on other sites More sharing options...
WINKJ Posted December 4, 2011 Share Posted December 4, 2011 Did u have any luck with getting no.1 to work? Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted December 17, 2011 Share Posted December 17, 2011 Why not just take the nav output + & - and wire them to a seperate little speaker That way you don't have to select AUX... Not sure if the NAV has volume control though as I don't have a birdview... Quote Link to comment Share on other sites More sharing options...
un1eash Posted December 19, 2011 Share Posted December 19, 2011 It does have a volume control but i'm not sure if its amplified so will be loud enough. Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted December 19, 2011 Share Posted December 19, 2011 It does have a volume control but i'm not sure if its amplified so will be loud enough. Trial and error i guess then, but if you go to all the trouble of identifying the right wires then would be worth a shot for the price of a cheap speaker, mine cost £4 from Maplins Quote Link to comment Share on other sites More sharing options...
AFTERSHOX Posted February 2, 2012 Author Share Posted February 2, 2012 The sat nav socket has wires for the audio that are as follows... Pin 18 - Navi Earth Pin 19 - Navi Input (-) Pin 20 - Navi Input (+) I wired these into a pair of phonos that then plugged into the back of my headunit. Unl1eash, I was just checking some wiring schematics - and the pin-outs you mentioned seem to relate to the "non-BOSE" HU... is that what you had before? FOR THE BOSE AUDIO UNIT (PIN OUTS) - I think these are the right ones? On the M39 connector. 24 NAVI ON (R/B) – RED / BLACK STRIPE 30 NAVI INPUT (-) (W/B) = WHITE / BLACK STRIPE 31 NAVI EARTH (B/OR) = BLACK / ORANGE STRIPE 32 NAVI INPUT (+) (L/B) = BLUE / BLACK STRIPE Let me know mate ! Quote Link to comment Share on other sites More sharing options...
un1eash Posted February 2, 2012 Share Posted February 2, 2012 My car was a GT 300 with Bose and i'm pretty sure it was the pins i quoted. I no longer have the car so unable to check but looking back at the wiring diagram i used it does say pins 30,31,32 so i'm not sure where i got those numbers from unless thats what i found when it came to fitting it. Quote Link to comment Share on other sites More sharing options...
AFTERSHOX Posted February 2, 2012 Author Share Posted February 2, 2012 un1leash I'm not giving up on getting the voice nav (blended) over the normal audio (e.g. not splicing or splitting the NAV loom) - although at least I have a plan B..) wiring the inputs to RCA's ...or spursmaddave's method - which is Plan C) Slightly OFF TOPIC, and perhaps another dumb question... but did you remove your NAV screen before attempting to remove the centre console? I've not started ripping stuff out yet - just wanna make sure I have all the bits and info before I get cracked on with it. Cheers fellas ! Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted February 2, 2012 Share Posted February 2, 2012 Good luck mate There are some good links to removing all the interior in the guides section, its actually pretty easy once you know where all the screws & bolts are and what order to take them out Quote Link to comment Share on other sites More sharing options...
un1eash Posted February 2, 2012 Share Posted February 2, 2012 The nav screen stays in place and never actually comes out as its bolted to the car. Quote Link to comment Share on other sites More sharing options...
lylesy Posted February 2, 2012 Share Posted February 2, 2012 Really want to do this myself let us know how u get on Quote Link to comment Share on other sites More sharing options...
AFTERSHOX Posted February 3, 2012 Author Share Posted February 3, 2012 The nav screen stays in place and never actually comes out as its bolted to the car. Assume the SATNAV control buttons have to come off for MY06 cars to remove the screws for the centre console? See thread below; viewtopic.php?f=35&t=3564 So, controls come off........ and screen stays put? Yes? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.