stuarty Posted May 11, 2011 Share Posted May 11, 2011 Hi all, Has anyone here used or heard of Simons custom exhausts in East Kilbride? I'm thinking of going to him for a custom exhaust. I cant really afford a miltek system and im not sure of the tailpipes on the scorpion! Simon sounds really professional, also he has done numerious 350Z systems. When I was there he was repairing a K2 systems flexi pipes on the Y section for a customer. I know custom systems aren't a brand name but I can get exactly what I want. Also all exhausts are guarenteed for life and can be modified at anytime to make them louder etc. Quote Link to comment Share on other sites More sharing options...
Neilp Posted May 11, 2011 Share Posted May 11, 2011 He used to work or own powerflow, He repaired my nismo y-pipe, He built jay's and irfans exhausts aswell i think. He definately knows his stuff but can be a little pricey sometimes. I think it was a scorpion he was repairing for cragus, his y-pipe flexi burst Quote Link to comment Share on other sites More sharing options...
stuarty Posted May 11, 2011 Author Share Posted May 11, 2011 He used to work or own powerflow, He repaired my nismo y-pipe, He built jay's and irfans exhausts aswell i think. He definately knows his stuff but can be a little pricey sometimes. I think it was a scorpion he was repairing for cragus, his y-pipe flexi burst Yip it was mate! Price wise, i found him really reasonable. Nice guy couldnt be more helpful tbh. Quote Link to comment Share on other sites More sharing options...
Cragus Posted May 11, 2011 Share Posted May 11, 2011 If it was yesterday it was my 350z he was fixing the flexijoints on but it's a scorpion system with japspeed y pipe and decats. My old man dropped it off though as I'm away this week for work. He also built Irfan and jays systems I believe. Quote Link to comment Share on other sites More sharing options...
stuarty Posted May 11, 2011 Author Share Posted May 11, 2011 If it was yesterday it was my 350z he was fixing the flexijoints on but it's a scorpion system with japspeed y pipe and decats. My old man dropped it off though as I'm away this week for work. He also built Irfan and jays systems I believe. Yip was yesterday. Do you know if Jay and Irfan are happy with there's mate? Quote Link to comment Share on other sites More sharing options...
Cragus Posted May 11, 2011 Share Posted May 11, 2011 Ah- just read their replies. Sorry - on s phone with no wifi. :-( Quote Link to comment Share on other sites More sharing options...
ewan221 Posted May 11, 2011 Share Posted May 11, 2011 I got mine from http://www.rmsexhausts.com. I was happy with it but have noticed some bad reviews on them recently Quote Link to comment Share on other sites More sharing options...
Stu350z Posted May 11, 2011 Share Posted May 11, 2011 I considered the custom route again. my old ST170 had a custom zorst built by c&c stainless in Hillington. They've just recently quoted me £640 for a cat back system for the Zed! Twin can style like a k1! Decided to get the Japspeed k1 so I can use the extra pennies I saved on other mods! Quote Link to comment Share on other sites More sharing options...
stuarty Posted May 11, 2011 Author Share Posted May 11, 2011 I considered the custom route again. my old ST170 had a custom zorst built by c&c stainless in Hillington. They've just recently quoted me £640 for a cat back system for the Zed! Twin can style like a k1! Decided to get the Japspeed k1 so I can use the extra pennies I saved on other mods! I got a quote from them today aswell, same price. Thought they were a bit expensive! They weld the whole exhaust together in sections I think. I would prefer it if most of it was mandrel bent tbh, I think joints= weakness. Only my opinion! They have got a really good reputation though. Quote Link to comment Share on other sites More sharing options...
Stu350z Posted May 11, 2011 Share Posted May 11, 2011 I considered the custom route again. my old ST170 had a custom zorst built by c&c stainless in Hillington. They've just recently quoted me £640 for a cat back system for the Zed! Twin can style like a k1! Decided to get the Japspeed k1 so I can use the extra pennies I saved on other mods! I got a quote from them today aswell, same price. Thought they were a bit expensive! They weld the whole exhaust together in sections I think. I would prefer it if most of it was mandrel bent tbh, I think joints= weakness. Only my opinion! They have got a really good reputation though. Yeah I thought it was expensive too! Your correct bout the weld in sections deal as that's what my old zorst was like! Never had a problem with it! Lifetime guarantee like everyone/everywhere else! Go for an aftermarket zorst and spend your change on some other mods! Quote Link to comment Share on other sites More sharing options...
stuarty Posted May 11, 2011 Author Share Posted May 11, 2011 I considered the custom route again. my old ST170 had a custom zorst built by c&c stainless in Hillington. They've just recently quoted me £640 for a cat back system for the Zed! Twin can style like a k1! Decided to get the Japspeed k1 so I can use the extra pennies I saved on other mods! I got a quote from them today aswell, same price. Thought they were a bit expensive! They weld the whole exhaust together in sections I think. I would prefer it if most of it was mandrel bent tbh, I think joints= weakness. Only my opinion! They have got a really good reputation though. Yeah I thought it was expensive too! Your correct bout the weld in sections deal as that's what my old zorst was like! Never had a problem with it! Lifetime guarantee like everyone/everywhere else! Go for an aftermarket zorst and spend your change on some other mods! TBH Simon custom exhausts is making me a Y section back fitted for less than a Scorpion supply only! For an extra £120 he'll include the Y section aswell. Quote Link to comment Share on other sites More sharing options...
Stu350z Posted May 11, 2011 Share Posted May 11, 2011 I considered the custom route again. my old ST170 had a custom zorst built by c&c stainless in Hillington. They've just recently quoted me £640 for a cat back system for the Zed! Twin can style like a k1! Decided to get the Japspeed k1 so I can use the extra pennies I saved on other mods! I got a quote from them today aswell, same price. Thought they were a bit expensive! They weld the whole exhaust together in sections I think. I would prefer it if most of it was mandrel bent tbh, I think joints= weakness. Only my opinion! They have got a really good reputation though. Yeah I thought it was expensive too! Your correct bout the weld in sections deal as that's what my old zorst was like! Never had a problem with it! Lifetime guarantee like everyone/everywhere else! Go for an aftermarket zorst and spend your change on some other mods! TBH Simon custom exhausts is making me a Y section back fitted for less than a Scorpion supply only! For an extra £120 he'll include the Y section aswell. That's a good price! Think I'll be paying them a visit to build me a Y pipe! Quote Link to comment Share on other sites More sharing options...
stuarty Posted May 11, 2011 Author Share Posted May 11, 2011 I considered the custom route again. my old ST170 had a custom zorst built by c&c stainless in Hillington. They've just recently quoted me £640 for a cat back system for the Zed! Twin can style like a k1! Decided to get the Japspeed k1 so I can use the extra pennies I saved on other mods! I got a quote from them today aswell, same price. Thought they were a bit expensive! They weld the whole exhaust together in sections I think. I would prefer it if most of it was mandrel bent tbh, I think joints= weakness. Only my opinion! They have got a really good reputation though. Yeah I thought it was expensive too! Your correct bout the weld in sections deal as that's what my old zorst was like! Never had a problem with it! Lifetime guarantee like everyone/everywhere else! Go for an aftermarket zorst and spend your change on some other mods! TBH Simon custom exhausts is making me a Y section back fitted for less than a Scorpion supply only! For an extra £120 he'll include the Y section aswell. That's a good price! Think I'll be paying them a visit to build me a Y pipe! I'm going tomorrow to see what excactly I want. I'll keep you posted mate. Quote Link to comment Share on other sites More sharing options...
Stu350z Posted May 11, 2011 Share Posted May 11, 2011 I'm going tomorrow to see what excactly I want. I'll keep you posted mate. Awesome cheers! I look forward to your info! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.