Jump to content

Help required (suspension)


rothers2901

Recommended Posts

Hi all a little help needed.

 

Just fetched the Z back from it's MOT, Passed glad to say :yahoo: But it did come back with 2 x Advisory notes.

1. Both front suspension arm rear bushes peeling.

2. o/s/r anti roll bar link slight play/wear.

 

I'm pretty sure i can locate the o/s/r anti roll bar link, but can any one enlighten me as to where the front suspension arm rear bushes are located.

 

Photo's would help. :headhurt:

Link to comment
Share on other sites

Hi all a little help needed.

 

Just fetched the Z back from it's MOT, Passed glad to say :yahoo: But it did come back with 2 x Advisory notes.

1. Both front suspention arm rear bushes peeling.

2. o/s/r anti roll bar link slight play/wear.

 

I'm pretty sure i can locate the o/s/r anti roll bar link, but can any one enlighten me as to where the front suspention arm rear bushes are located.

 

Photo's would help. :headhurt:

 

Here you go:

 

289201423419.png

 

1-The front arm is the transverse link and the rear arm is the compression arm and this would be the bush that is faulty; this is common the case;) No 10 and 12 on the schematic below for both Rh and LH:) i have a put up a potential GB for uprated urethane bushes by Superpro to replace the OEM rubber type bush. see thread under suspension and also suspension tech thread :p Stick your name down :thumbs: Alex sells OEM type rubber bush which is the other option. Solid bushes are also available from Abbey or SPL directly but cost more :)

 

2-The ARB link is No. 19/21 and you can get this from Alex or Nissan or even JDM performance but if your car is lowered you want adjustable ones like Powergrid from Adam @z-1 or similar from Abbey or Whiteline.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...