RisingPower Posted February 3, 2011 Share Posted February 3, 2011 So, I read a few other similar threads and found the check valve in the brake fluid area, but that's fine and anyway it seems to be for the driver side arm. Now, looking at the service manual, it mentions two check valves, one wider than the other, if so, any ideas where this is? Or any other ideas at which point the tube could be blocked (not the arm, tried that with a pin)? Cheers Quote Link to comment Share on other sites More sharing options...
Woody Posted February 3, 2011 Share Posted February 3, 2011 The valves may be no return valves. Possibly blocked. Have you checked if the pipe has blown off? Quote Link to comment Share on other sites More sharing options...
RisingPower Posted February 3, 2011 Author Share Posted February 3, 2011 Only pipe I could see was in the brake fluid area and that seems fine. Quote Link to comment Share on other sites More sharing options...
Wasso Posted February 3, 2011 Share Posted February 3, 2011 I once experienced a blockage just prior to the jets (not on a zed), which required taking the hose from the nozzle off and clearing the blockage. It had me baffled for weeks as to why there was no water coming through. Just a thought? Quote Link to comment Share on other sites More sharing options...
RisingPower Posted February 3, 2011 Author Share Posted February 3, 2011 Just took another look, it must be at the y connector or after, which, you don't seem to be able to get at Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.