350 Russ Posted November 25, 2010 Share Posted November 25, 2010 i recently bought a set of nissan rear parking sensors and have the instructions but im a bit confused by them in places. this one says to splice in the (+ Red) to the light green behind the rear light. is that the wire that gives power to the reverse light therefore powering up the sensors? also can someone tell me where this (the buzzer) is meant to be on the car as its a bit vague. any help is much apprectiated Quote Link to comment Share on other sites More sharing options...
glrnet Posted November 25, 2010 Share Posted November 25, 2010 Here's my post which includes the wiring diagram in pdf, not sure about the Nissan Buzzer though viewtopic.php?f=9&t=39329&p=586502&hilit=steelmate#p586502 Quote Link to comment Share on other sites More sharing options...
glrnet Posted November 25, 2010 Share Posted November 25, 2010 The buzzer is usually included in the kit. Quote Link to comment Share on other sites More sharing options...
350 Russ Posted November 25, 2010 Author Share Posted November 25, 2010 The buzzer is usually included in the kit. it is in the kit, im trying to understand on the drawing where its supposed to go Quote Link to comment Share on other sites More sharing options...
Watshot Posted November 25, 2010 Share Posted November 25, 2010 it is in the kit, im trying to understand on the drawing where its supposed to go Mines fitted to the rear panel in the spare wheel well. I agree, the picture is a bit vague but it looks to be in that area. As long as everything reaches it won't matter that much as the buzzer is VERY loud. I ended up putting a piece of tape over the hole on the buzzer to tone it down a bit, works well (and I have a tonneau divider). Just a tip if you have the same issues with volume. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.