Tarmac@TarmacSportz Posted October 6, 2010 Share Posted October 6, 2010 Ok So I get in the car this morning and blowers are on full pelt... I try turning them down, turning them up, turning them off and turning the engine off and on again but it still stays on full pelt when engines on, im either or im Anyone got any ideas.... The aircon fascia was taken off at the weekend to get my new knob on so I don't know if thats affected it somehow ??? I know this is a technical question so im not expecting many replies Quote Link to comment Share on other sites More sharing options...
Ian Posted October 6, 2010 Share Posted October 6, 2010 Check the cable. If thats loose then they come on full blast Quote Link to comment Share on other sites More sharing options...
BladesGrant Posted October 6, 2010 Share Posted October 6, 2010 I would bet that the connector behind the dials has come loose or not been re-connected. When I have changed the Sat Nav and Stereo and taken the connector off the blowers just come on full bore if you start the engine. I would start there. Quote Link to comment Share on other sites More sharing options...
BladesGrant Posted October 6, 2010 Share Posted October 6, 2010 Check the cable. If thats loose then they come on full blast There just isn't any beating you sometimes!! Quote Link to comment Share on other sites More sharing options...
UNABASHED Posted October 6, 2010 Share Posted October 6, 2010 looks like user error then Quote Link to comment Share on other sites More sharing options...
Ian Posted October 6, 2010 Share Posted October 6, 2010 Check the cable. If thats loose then they come on full blast There just isn't any beating you sometimes!! Quote Link to comment Share on other sites More sharing options...
Wasso Posted October 6, 2010 Share Posted October 6, 2010 I actually recall the same issue, if the cable to the blower unit is not fitted the blowers engage. Once you fit them it must send a signal to then read back to the relevant units the required setting on the dials. Time to take it all off and check that cable..... A pain in the #### I know.... Quote Link to comment Share on other sites More sharing options...
BladesGrant Posted October 6, 2010 Share Posted October 6, 2010 I actually recall the same issue, if the cable to the blower unit is not fitted the blowers engage. Once you fit them it must send a signal to then read back to the relevant units the required setting on the dials. Time to take it all off and check that cable..... A pain in the #### I know.... Its not that big a pain, you only have pull the gear surround up to check the connector. 1 minute tops. Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted October 6, 2010 Share Posted October 6, 2010 yeah husky fitted that bit, not me, possibly worked loose if not fully engaged. might have been my fault; i forget now Quote Link to comment Share on other sites More sharing options...
James B Posted October 6, 2010 Share Posted October 6, 2010 As the other guys said. The cable is either still unconnected or loose. Quote Link to comment Share on other sites More sharing options...
Stew Posted October 6, 2010 Share Posted October 6, 2010 I blame shoddy workmanship! Quote Link to comment Share on other sites More sharing options...
Tarmac@TarmacSportz Posted October 6, 2010 Author Share Posted October 6, 2010 Wow Thanks for all the replies... I guess I will be having words with the fitter Quote Link to comment Share on other sites More sharing options...
BladesGrant Posted October 6, 2010 Share Posted October 6, 2010 Wow Thanks for all the replies... I guess I will be having words with the fitter It will now be embarrassing if all these same replies are wrong!! Quote Link to comment Share on other sites More sharing options...
Ebized Posted October 6, 2010 Share Posted October 6, 2010 Wow Thanks for all the replies... I guess I will be having words with the fitter Shoddy workmanship by that fitter then it seems Quote Link to comment Share on other sites More sharing options...
Husky Posted October 6, 2010 Share Posted October 6, 2010 Tarmac you bafoon Lift off the surround and push the connector home. Biscuit fitted your gear knob if you recall Quote Link to comment Share on other sites More sharing options...
BladesGrant Posted October 6, 2010 Share Posted October 6, 2010 Tarmac you bafoon And finally the correct technical terminology!! Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted October 6, 2010 Share Posted October 6, 2010 Tarmac you bafoon Lift off the surround and push the connector home. Biscuit fitted your gear knob if you recall ah but husky was in charge of umm... well.... eeer... electrical maintainence i was just fitting the knob Quote Link to comment Share on other sites More sharing options...
Ian Posted October 6, 2010 Share Posted October 6, 2010 Damn Honda drivers Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted October 6, 2010 Share Posted October 6, 2010 Damn Honda drivers yeah sorry, we don't tend to get electrical faults with our cars, so not the best people in an electrical crisis Quote Link to comment Share on other sites More sharing options...
Vik54 Posted October 6, 2010 Share Posted October 6, 2010 Tarmac you bafoon Lift off the surround and push the connector home. Biscuit fitted your gear knob if you recall ah but husky was in charge of umm... well.... eeer... electrical maintainence i was just fitting the knob Chris = John = Rich = get with the programme lads! Quote Link to comment Share on other sites More sharing options...
Husky Posted October 6, 2010 Share Posted October 6, 2010 Chris, if you want i will drive over tonight and plug it in for you. Quote Link to comment Share on other sites More sharing options...
Tarmac@TarmacSportz Posted October 6, 2010 Author Share Posted October 6, 2010 Its alright Its pretty warm today so I don't mind having the aircon on full blast Quote Link to comment Share on other sites More sharing options...
Husky Posted October 6, 2010 Share Posted October 6, 2010 Its alright Its pretty warm today so I don't mind having the aircon on full blast chris, pull the surround like i showed you and plug the cable in Quote Link to comment Share on other sites More sharing options...
Tarmac@TarmacSportz Posted October 6, 2010 Author Share Posted October 6, 2010 Its alright Its pretty warm today so I don't mind having the aircon on full blast chris, pull the surround like i showed you and plug the cable in I will mate, it was just a joke Quote Link to comment Share on other sites More sharing options...
Husky Posted October 6, 2010 Share Posted October 6, 2010 I know, your making me look bad here i I have a reputation to uphiold don't you know! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.