AlexZ Posted August 22, 2010 Share Posted August 22, 2010 Hi people, does anyone know if you can adjust the handbrake tension via the handbrake cable at the handbrake itself rather than as the manual talks you through. Most jap cars I've fixed or serviced etc you can adjust a tension nut on the handbrake cable itself and achive equal tension to each rear disk/drum.. Alexz Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted August 22, 2010 Share Posted August 22, 2010 Best to let off the cable, adjust up the drums and then readjust the cable. A quick tighten up of the cable will not cause any harm but to get the best from your handbrake the drums should be adjusted first. Alex. Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted August 22, 2010 Share Posted August 22, 2010 I got Abbey to adjust my handbrake when I got a P1 service done a couple of months back but its slipped again and I have to leave the car in gear if im on any kind of slope. Is it likely I need something replaced or just adjusted again its going to Abbey for an MOT next tuesday anyway.... Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted August 22, 2010 Share Posted August 22, 2010 If adjusted up properly then it should just sneak past its MOT . As you know Dave the handbrake is characteristically very poor on the Z and does not inspire much confidence. Quote Link to comment Share on other sites More sharing options...
spursmaddave Posted August 22, 2010 Share Posted August 22, 2010 If adjusted up properly then it should just sneak past its MOT .As you know Dave the handbrake is characteristically very poor on the Z and does not inspire much confidence. I'm sure the guys at Abbey will get it sorted, cheers Alex Quote Link to comment Share on other sites More sharing options...
AlexZ Posted August 22, 2010 Author Share Posted August 22, 2010 Best to let off the cable, adjust up the drums and then readjust the cable. A quick tighten up of the cable will not cause any harm but to get the best from your handbrake the drums should be adjusted first. Alex. Evening Alex, thanks for the quick reply...I didn't have time to get the wheels off etc today so I just whipped the three screw out the centre console and used a 10mm ratchet spanner to tighten the cable. She feels a lot better but time will tell I guess. Regards Alex Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted August 22, 2010 Share Posted August 22, 2010 Best to let off the cable, adjust up the drums and then readjust the cable. A quick tighten up of the cable will not cause any harm but to get the best from your handbrake the drums should be adjusted first. Alex. Evening Alex, thanks for the quick reply...I didn't have time to get the wheels off etc today so I just whipped the three screw out the centre console and used a 10mm ratchet spanner to tighten the cable. She feels a lot better but time will tell I guess. Regards Alex Buy yourself a deep 10mm socket for next time and adjust through the ashtray aperture. 1 Quote Link to comment Share on other sites More sharing options...
AlexZ Posted August 22, 2010 Author Share Posted August 22, 2010 Best to let off the cable, adjust up the drums and then readjust the cable. A quick tighten up of the cable will not cause any harm but to get the best from your handbrake the drums should be adjusted first. Alex. Evening Alex, thanks for the quick reply...I didn't have time to get the wheels off etc today so I just whipped the three screw out the centre console and used a 10mm ratchet spanner to tighten the cable. She feels a lot better but time will tell I guess. Regards Alex Buy yourself a deep 10mm socket for next time and adjust through the ashtray aperture. Haha I have have 1/4, 3/8 and 1/2 inch ratchets all with 10mm deep sockets, but I didnt know were the nut was...Mint tip mate, were theres a will theres a way lol. Quote Link to comment Share on other sites More sharing options...
mattbowey Posted August 22, 2010 Share Posted August 22, 2010 think i will have a look at mine tomo for a quick fix if its that easy, obv get it looked at properly when i get a chance Quote Link to comment Share on other sites More sharing options...
AlexZ Posted August 23, 2010 Author Share Posted August 23, 2010 Hi Matt, if you can't see it through the ash tray I have wrote a little strip process in my progress thread although there arnt any images lol. Remember adjust the cable with the handbrake off lol. Alex Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.