hiding amp wires

[billyokco]

had a search but cant find anything. just wondering which is best way to run wires from headunit to boot for a sub + amp whilst keeping them hidden. down side of centre console or side or car??

 

thanks

[Madmarky]

Run your power lead down the passenger side of the car and all other leads can go to the boot via the centre console. Its not a too hard job.

[un1eash]

I ran my power and phono leads down the passenger side and the rear speaker cable down the centre console with the remote lead.

 

The 350Z is real easy to work on, everything unclips and for once the clips are pretty strong so dont break.

[Chris`I]

As the others have said, power down the passenger side (theres even a cable "tunnel" to put them down) by the door. Bits from the HU got down the centre. Its dead easy to lift the centre tunnel trim up and run the cables, 5 screws IIRC.

[mattbowey]

I ran my power and phono leads down the passenger side and the rear speaker cable down the centre console with the remote lead.

 

The 350Z is real easy to work on, everything unclips and for once the clips are pretty strong so dont break.

 

i guess i was a little heavy handed with the clips on mine then...

 

oops

[un1eash]

I was expecting it to be a nightmare to get at the rear speakers and remove the sub but everything just popped off.