geoff-r Posted February 20, 2010 Share Posted February 20, 2010 After some help on this really. I just put my new wheels on (20 inch) and my car is now undriveable which is really not making me happy, the traction control kicks in ALL the time. I have to drive around with the traction control off which is all good and well but it's avoiding the problem really. The front hubs have 20mm Eibach spacers on them which seem to be as tight as they can go, there are no clearance issues. I've had my wheels on 5 minutes and I'm this close to taking them off and selling them if they're going to cause me these issues. Has anyone else come across this problem? Quote Link to comment Share on other sites More sharing options...
Stew Posted February 20, 2010 Share Posted February 20, 2010 What size tyres you running? Also what width are the wheels again? Quote Link to comment Share on other sites More sharing options...
geoff-r Posted February 20, 2010 Author Share Posted February 20, 2010 9 inch up front with a 255 tyre and 10.5 inch on the rear with a 285 tyre, there are no clearance issues at all, no rubbing, full lock is fine as well. It's got me a little more than baffled. Quote Link to comment Share on other sites More sharing options...
geoff-r Posted February 20, 2010 Author Share Posted February 20, 2010 Just stumbled on this piece: http://www.wheelstudio.com/nissan_350z_wheels.php Quote Link to comment Share on other sites More sharing options...
geoff-r Posted February 20, 2010 Author Share Posted February 20, 2010 Seems I may have an issue with tyre sizes oopss Quote Link to comment Share on other sites More sharing options...
Stew Posted February 20, 2010 Share Posted February 20, 2010 I run 245 and 285 with matching profiles on 20s. Quote Link to comment Share on other sites More sharing options...
Harman350z Posted February 20, 2010 Share Posted February 20, 2010 My 20's have Toyo T1R's F - 245/35/20 R - 275/30/20 Quote Link to comment Share on other sites More sharing options...
geoff-r Posted February 20, 2010 Author Share Posted February 20, 2010 There's my issue. I think in my impatience and not realising different profiles would cause an issue I've bought the wrong tyre, mind you I did question that with the place I bought them from and they assured me I wouldn't notice a thing. What a pain in the arse! Car looks nice on the wheels but I can't really drive it, time to crack my commuter back out for the weekend Quote Link to comment Share on other sites More sharing options...
geoff-r Posted February 20, 2010 Author Share Posted February 20, 2010 My 20's have Toyo T1R's F - 245/35/20 R - 275/30/20 I have F - 255/40/20 and R - 285/30/20. The rears were what I questioned as I requested a '35' profile not '30' but they assured me it would be all good. Maybe I should take this up with the place I bought them although I wish I hadn't bought them mail order now. Quote Link to comment Share on other sites More sharing options...
Stew Posted February 20, 2010 Share Posted February 20, 2010 255/40 and 285/30 are strange sizes..... I'd keep it matching profile. I'm pretty sure mine are 30 all round and I have no issues. Quote Link to comment Share on other sites More sharing options...
Chris`I Posted February 20, 2010 Share Posted February 20, 2010 The zed has staggered tyre sizes in terms of rolling radius, most garages don't pick up on that. You need to match what you had before interms of RR Quote Link to comment Share on other sites More sharing options...
Sarnie Posted February 20, 2010 Share Posted February 20, 2010 My 20's have Toyo T1R's F - 245/35/20 R - 275/30/20 I have F - 255/40/20 and R - 285/30/20. The rears were what I questioned as I requested a '35' profile not '30' but they assured me it would be all good. Maybe I should take this up with the place I bought them although I wish I hadn't bought them mail order now. No wonder your having problems, running 40 upfront and 30 on the rear Quote Link to comment Share on other sites More sharing options...
geoff-r Posted February 20, 2010 Author Share Posted February 20, 2010 255/40 and 285/30 are strange sizes..... I'd keep it matching profile. I'm pretty sure mine are 30 all round and I have no issues. That's good to know mate. So I'm not going to whip them off and sell them just yet. Standard the alloys have 40 on the front and 35 on the rear, I'm just going to have to get a set with a 35 profile on the rear then. Thanks for the input guys. I just wish I'd realised the importance of rolling radius' prior to buying tyres. Quote Link to comment Share on other sites More sharing options...
Husky Posted February 20, 2010 Share Posted February 20, 2010 if the people who sold you them advised you they would be perfectly fine they aren't fit for purpose and you can return them for a full refund or the right tyre Quote Link to comment Share on other sites More sharing options...
Stew Posted February 20, 2010 Share Posted February 20, 2010 255/40 and 285/30 are strange sizes..... I'd keep it matching profile. I'm pretty sure mine are 30 all round and I have no issues. That's good to know mate. So I'm not going to whip them off and sell them just yet. Standard the alloys have 40 on the front and 35 on the rear, I'm just going to have to get a set with a 35 profile on the rear then. Thanks for the input guys. I just wish I'd realised the importance of rolling radius' prior to buying tyres. Damn, I'd have given you £100 for the wheels.... I think changing to a matched profile will sort you out. Quote Link to comment Share on other sites More sharing options...
rich5259 Posted February 20, 2010 Share Posted February 20, 2010 245/35x20 front and 285/30x20 rear should sort it out Quote Link to comment Share on other sites More sharing options...
clarkie34 Posted February 20, 2010 Share Posted February 20, 2010 I would go 30 profile all round. Quote Link to comment Share on other sites More sharing options...
marzman Posted February 20, 2010 Share Posted February 20, 2010 I would go 30 profile all round. +1 Quote Link to comment Share on other sites More sharing options...
Madmarky Posted February 20, 2010 Share Posted February 20, 2010 245/35x20 front and 285/30x20 rear should sort it out +1 thats what i run but you knew that anyway Rich Quote Link to comment Share on other sites More sharing options...
Ekona Posted February 20, 2010 Share Posted February 20, 2010 Use this and all shall be revealed 245/30/20 and 285/30/20 are the correct sizes if you're going to keep the rolling radius the same. Quote Link to comment Share on other sites More sharing options...
Stew Posted February 20, 2010 Share Posted February 20, 2010 Use this and all shall be revealed 245/30/20 and 285/30/20 are the correct sizes if you're going to keep the rolling radius the same. I'm the king of tyres then! Most people opt for odd profiles or 275s. Quote Link to comment Share on other sites More sharing options...
geoff-r Posted February 20, 2010 Author Share Posted February 20, 2010 Use this and all shall be revealed 245/30/20 and 285/30/20 are the correct sizes if you're going to keep the rolling radius the same. I don't know if having a 30 profile all round is keeping the rolling radius the same. The profile is a ratio of the wheel width. I think I'm going to go back to the people I bought the tyres off, if they kick up a fuss the receipt I have states the tyre sizes I paid for and I have correspondence showing that after paying they realised they didn't have my size in stock and they suggested an alternative that would be 'as good as the original tyre'. Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted February 20, 2010 Share Posted February 20, 2010 if these lads say 30 all round, i'd go with that, Quote Link to comment Share on other sites More sharing options...
Madmarky Posted February 20, 2010 Share Posted February 20, 2010 Just go back to the tyre place, explain the problem and get them to swap your fronts for some 245/35/20 or 245/30/20 (choice is yours, wont make any difference). Then get in ya car and have some fun driving it! Quote Link to comment Share on other sites More sharing options...
Ekona Posted February 20, 2010 Share Posted February 20, 2010 Use this and all shall be revealed 245/30/20 and 285/30/20 are the correct sizes if you're going to keep the rolling radius the same. I don't know if having a 30 profile all round is keeping the rolling radius the same. If you use the link I supplied then you'll see that it keeps the rolling radius as close to original specs as is possible. Don't just take my word for it, give it a go yourself and see. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.