neilh Posted September 18, 2009 Share Posted September 18, 2009 Hi All, I am getting no fluid ot the windscreen whilst headlights and rear are OK. I have checked for one-way value sticking but it isn't there so it cant be that ! With the bumper off I can hear the pump motor for windscreen whirrs but doesn't pump fluid so I guess it's a complete replacment? So has anyone have one (it is the white topped one as against blue) or have any ideas on where to get a replacement motor/pump. Any help appreciated Thx Neil Quote Link to comment Share on other sites More sharing options...
M13KYF Posted September 18, 2009 Share Posted September 18, 2009 pm R35LEE. He'll have the parts. Quote Link to comment Share on other sites More sharing options...
marzman Posted September 18, 2009 Share Posted September 18, 2009 The pipes and valves from the pump to the outlets are notoriously bad - i would disconnect the first pipe from the reservoir first and see if anything is pumped out first, before replacing the pump itself. If its making a noise at least, then there's more than a good chance it still works! Quote Link to comment Share on other sites More sharing options...
Pimm Posted September 18, 2009 Share Posted September 18, 2009 Hi All,I am getting no fluid ot the windscreen whilst headlights and rear are OK. I have checked for one-way value sticking but it isn't there so it cant be that ! With the bumper off I can hear the pump motor for windscreen whirrs but doesn't pump fluid so I guess it's a complete replacment? So has anyone have one (it is the white topped one as against blue) or have any ideas on where to get a replacement motor/pump. Any help appreciated Thx Neil Where did you look for the one way valve ?? I had the same fault and it was the valve that needed replacing just below the windscreen/brakefluid area. Picture below Quote Link to comment Share on other sites More sharing options...
R35LEE Posted September 21, 2009 Share Posted September 21, 2009 If the motor is pumping and sounds like its straining it will the the flow valve. I replaced one for a mate on here last week, which reminds me he owes me a beer Quote Link to comment Share on other sites More sharing options...
neilh Posted September 22, 2009 Author Share Posted September 22, 2009 Thx for feedback, I don't have the flow valve - removed previoulsy I guess. Since bumper is off for respray at momentI have had chance to check lines nad all clear but pump in trouble - whines but no flow. To get it sorted quik i have forked for new pump from local dealer. Know by weekedn if thats sorted it. Cheers Neilh Quote Link to comment Share on other sites More sharing options...
ug45cwb Posted September 22, 2009 Share Posted September 22, 2009 If the motor is pumping and sounds like its straining it will the the flow valve. I replaced one for a mate on here last week, which reminds me he owes me a beer Think its definatly more than 1 Lee! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.