Andy Posted September 10, 2009 Share Posted September 10, 2009 Got a few bits available as follows..... Dry weave carbon fibre dial cover, brand new and unused..........£40 delivered (retail at £55 + delivery) Please note this is a matt carbon finish so as to not reflect up into the windscreen. Fits with some simple double sided numberplate tape, bluetac or similar. Carbon Fibre center dash cover..........£40 delivered Has a couple of marks on it, some of which may polish out, I have tried to take photos to illustrate the slight scratching. I only have this piece, not the lower piece nor the cubby cover. Blue silicone 3 coolant hose set..........£40 delivered Brand new and unused, made by Demon Motorsport. OEM gearknob..........£offers Has some wear on the top of it and some scratches lower down which were made whilst trying to remove it. oem cloth seats..........£200 ono Cloth seats from a 2004 Z. I have more photos but not hosted online, please contact me if you would like more pics. Quote Link to comment Share on other sites More sharing options...
alessandro Posted September 10, 2009 Share Posted September 10, 2009 Interested on the top two and happy with the price, only one question, where can I go to fit them? Specially the centre console Quote Link to comment Share on other sites More sharing options...
Husky Posted September 10, 2009 Share Posted September 10, 2009 your driveway? why would you need to go somewhere to get them fitted, im sure its pretty simple Quote Link to comment Share on other sites More sharing options...
UNABASHED Posted September 10, 2009 Share Posted September 10, 2009 I may be interested in the knob Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted September 10, 2009 Share Posted September 10, 2009 its fairly easy, peel off backing of sticky tape. align with dash push on job done, sit back, drink beer, admire handy work Quote Link to comment Share on other sites More sharing options...
alessandro Posted September 10, 2009 Share Posted September 10, 2009 I'll give it a go but I'm REALLY crap when it comes to DIY, I don't think I'll have much prob with the dial cover but for the centre console bit, I'll have to remove the original and not confident on it Quote Link to comment Share on other sites More sharing options...
Husky Posted September 10, 2009 Share Posted September 10, 2009 Fits with some simple double sided numberplate tape, bluetac or similar. you should be fine by the sounds of it its a stick on cover aswell Quote Link to comment Share on other sites More sharing options...
alessandro Posted September 10, 2009 Share Posted September 10, 2009 its fairly easy, peel off backing of sticky tape. align with dash push on job done, sit back, drink beer, admire handy work I think you guys might have guessed that I'm a newby. If it's all stcky stuff it's a defenately a YES Quote Link to comment Share on other sites More sharing options...
Husky Posted September 10, 2009 Share Posted September 10, 2009 go on, get your hands dirty, you know you want to Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted September 10, 2009 Share Posted September 10, 2009 I'll give it a go but I'm REALLY crap when it comes to DIY, I don't think I'll have much prob with the dial cover but for the centre console bit, I'll have to remove the original and not confident on it no removal required, sticks on top of the original. amersham is that near oxford, if so i might know somewhere that would do it for you, they build and race prep lotus race cars for the elise trophy and he's a mate of mine Quote Link to comment Share on other sites More sharing options...
Andy Posted September 10, 2009 Author Share Posted September 10, 2009 The guys are correct, all you need to do is peel off the backing of the pads and stick it over the existing console. Dead easy to do as is the dial cover Quote Link to comment Share on other sites More sharing options...
alessandro Posted September 10, 2009 Share Posted September 10, 2009 amersham is that near oxford, if so i might know somewhere that would do it for you, they build and race prep lotus race cars for the elise trophy and he's a mate of mine How come that most of you here have cool jobs or friends with cool jobs.... I'm not jealus I'll give it a go my self, it will look even better if I do it. ANDY you have a PM Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted September 10, 2009 Share Posted September 10, 2009 I may be interested in the knob ...and nobody comments on this post?!?!?!?!?!? Standards are slipping on here.... Quote Link to comment Share on other sites More sharing options...
Husky Posted September 10, 2009 Share Posted September 10, 2009 I'll give it a go my self, it will look even better if I do it. thats the spirit my man!! Depends on what you term a cool job, jobs are never as good as their title sounds BM, you pervert hahaha Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted September 10, 2009 Share Posted September 10, 2009 I may be interested in the knob ...and nobody comments on this post?!?!?!?!?!? Standards are slipping on here.... i was trying to be refrained and adult about it but if you must he said knob teheheheheheh Quote Link to comment Share on other sites More sharing options...
alessandro Posted September 10, 2009 Share Posted September 10, 2009 Quote Link to comment Share on other sites More sharing options...
Andy Posted September 14, 2009 Author Share Posted September 14, 2009 The carbon pieces and hoses are sold subject to payment. Quote Link to comment Share on other sites More sharing options...
3FIDDYZ Posted September 14, 2009 Share Posted September 14, 2009 It is an RSW centre console and if you want the rest of it, then you may want to have a word with Envy as they have the rest of the bits not to make it look out of place! Quote Link to comment Share on other sites More sharing options...
Xendric Posted September 29, 2009 Share Posted September 29, 2009 Anyone heard from Andy recenlty? I've sent him the money for the hoses, but I'm not getting any more replies from him. Been almost two weeks now... Quote Link to comment Share on other sites More sharing options...
alessandro Posted September 29, 2009 Share Posted September 29, 2009 I got the CF bits from Andy and took 2 weeks to be delivered I guess because of the postal strike. It is an RSW centre console and if you want the rest of it, then you may want to have a word with Envy as they have the rest of the bits not to make it look out of place! I already had a look at it and it's lovely stuff but the bottom part it's over £ 200 defenetly worth the money but it's out of my budget at the moment. Any second hand going? Quote Link to comment Share on other sites More sharing options...
Xendric Posted September 29, 2009 Share Posted September 29, 2009 I got the CF bits from Andy and took 2 weeks to be delivered I guess because of the postal strike. Well, I wouldn't mind if it took 2 months to have them delivered, as long as I'm not ignored on PMs. Quote Link to comment Share on other sites More sharing options...
Andy Posted September 30, 2009 Author Share Posted September 30, 2009 I have replied to your PM Xendric, the pipes were sent last week and I have a tracking number for them. Alessandro, you paid by cheque so it was always going to take longer. Quote Link to comment Share on other sites More sharing options...
Xendric Posted September 30, 2009 Share Posted September 30, 2009 I have replied to your PM Xendric, the pipes were sent last week and I have a tracking number for them. Cheers. Guess I'll have to wait some more. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.