M350ZB Posted June 16, 2009 Share Posted June 16, 2009 looking forawrd to the prices and love the coloured carbon Quote Link to comment Share on other sites More sharing options...
Anubis Posted June 16, 2009 Share Posted June 16, 2009 I will get some prices for the interior parts up today Can you tell us how much all the interior parts will cost (i.e. seperately and together as a big pack). I'm very interested in the big pack with everything in it. Should include: > Door Handle trim > dial gauge cover > rear view mirror cover > window switches trim > center console trim (this is two versions since 2006 models have the hazard lights button in different location - need extra hole infront of gear stick, whereas older models don't need the hole) > center air vent covers Eagerly awaiting for prices and ETA for them! Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 16, 2009 Author Share Posted June 16, 2009 Will be giving prices out (for individual pieces and a discounted price for the whole lot) when we receieve the original pieces to take a look at Quote Link to comment Share on other sites More sharing options...
phinnies1 Posted June 16, 2009 Share Posted June 16, 2009 Would be very interested in some interior changes Quote Link to comment Share on other sites More sharing options...
neodc Posted June 16, 2009 Share Posted June 16, 2009 Why are the pictures gone ? Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 17, 2009 Author Share Posted June 17, 2009 Links have been fixed on the last page - my apologies Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 17, 2009 Author Share Posted June 17, 2009 Few pics from today... Vaccuum bagging of some door sills My very own centre console Quote Link to comment Share on other sites More sharing options...
3FIDDYZ Posted June 17, 2009 Share Posted June 17, 2009 Real carbon rear strut for you! Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 17, 2009 Author Share Posted June 17, 2009 Very nice Quote Link to comment Share on other sites More sharing options...
3FIDDYZ Posted June 17, 2009 Share Posted June 17, 2009 Also, I have a carbon mirror cover you could use to copy... Might be easier than molding a mirror!! And my carbon door mirrors may be coming off for a while whilst there is a cosmetic change! Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 17, 2009 Author Share Posted June 17, 2009 Fairly sure I have a member already who has offered to provide the mirror cover to mould but if I am mistaken (seem to have acquired a LOT of PM so will have to sort through them all tomorrow and see exactly who is offering what) then I will certainly keep your offer in mind mate Quote Link to comment Share on other sites More sharing options...
3FIDDYZ Posted June 17, 2009 Share Posted June 17, 2009 No worries, give me a shout if you need it! Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 24, 2009 Author Share Posted June 24, 2009 Right guys sorry there has been on update for a few days things got pretty busy pretty quick but here we are. Somehow I managed to lose the list of people I wrote down who had offered us the parts to mould for the interior parts. Last I remember someone (P15 ULT springs to mind) was sending us the interior parts to mould so we could get the group buy together. Basically we after the two window control surrounds for the doors, the two bits of the centre console section, the bits in the pic below and the rear strut brace cover. If I have mis-understood you P15 ULT please correct me - it's my own stupid fault I can;t find that list!! Thanks guys Jay Quote Link to comment Share on other sites More sharing options...
jpaero Posted June 24, 2009 Share Posted June 24, 2009 did you get these parts? Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 24, 2009 Author Share Posted June 24, 2009 No. We have a member on here who lives very close to me now offering to loan us them for moulds though so I think that will be happening this week Quote Link to comment Share on other sites More sharing options...
jpaero Posted June 24, 2009 Share Posted June 24, 2009 Good stuff! Interested in a lot of carbon! Hope to hear about it soon. Quote Link to comment Share on other sites More sharing options...
Carbon Coops Posted June 30, 2009 Share Posted June 30, 2009 I am sure TECH CARBON will be along soon with an update but i gave them the following parts from my Z to begin work, so these are the parts they are currently working on! coops Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted June 30, 2009 Share Posted June 30, 2009 WOW! That's alot of bits, can't wait to see the prototypes. If the finish is as good as I imagine it and the price is as good as I hope it will be, I may be in for some retail therapy... Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 30, 2009 Author Share Posted June 30, 2009 Yeah as you guys can see from pics we got work cut out! Just waiting on a new oven to get delivered this week then turning out bits like the interior trim shown above will be quick and easy In the process of taking moulds of all the stuff Cooper kindly loaned... we weren't quite expecting the amount of stuff he brought but hey-ho - life's full of surprises. Quote Link to comment Share on other sites More sharing options...
Carbon Coops Posted June 30, 2009 Share Posted June 30, 2009 yea i do like carbon coops Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted June 30, 2009 Share Posted June 30, 2009 You should have given them your enginecover too (unless they already got that covered) Quote Link to comment Share on other sites More sharing options...
Tech Carbon Posted June 30, 2009 Author Share Posted June 30, 2009 Coops did offer that too We decided to just take on the interior trim for now... get all the moulds done and the prototype ones for Coops' car, make sure all is good then sort a group buy for all the bits in the near future and after that's done moving on to the engine bay and the exterior panels. Quote Link to comment Share on other sites More sharing options...
Grantmitchell Posted June 30, 2009 Share Posted June 30, 2009 oooh sounds good - cant wait to see the results Quote Link to comment Share on other sites More sharing options...
shire350Z Posted July 10, 2009 Share Posted July 10, 2009 be good to see the parts when finished!!! will i be able to come down to your place to view some of your work and maybe fit it down there jay? Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted July 10, 2009 Share Posted July 10, 2009 look forwar dto seeing these. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.