Jump to content

MY Z IS BROKEN HELP


TJB193

Recommended Posts

Hello all, my HR 350z is giving me all sorts of issues. The current issue being P0171 (Bank 1 too lean). The car has been smoke tested and there are no leaks so its a fueling issue or faulty sensor/reading.  The car idles perfectly when hot or cold. If the light is reset and the car is cold it drives fine until it warms up (10/15 mins in) then it gets really juddery and starts missing badly. The misses can be heard at idle, it almost sounds like its been tuned to have overrun. The MAF sensors are new and so are the O2 sensors in the Cats. I am running a Decat. Any suggestions welcome. Thank you in advance 

Link to comment
Share on other sites

57 minutes ago, MONKEYSOCKS said:

Has the car actually been tuned since the decats were fitted? 

Yeah it had been tuned. During my process of elimination the tune has been removed & the fault is still here so it couldn’t have been the tune causing the issue. 

Link to comment
Share on other sites

44 minutes ago, P15UL T said:

Are they OEM sensors you have installed.  The cheaper aftermarket once are known to cause problems. 

The MAFS are hitachi but the o2 is non genuine eBay special. This sensor is on the other bank and they both give near enough the same readings. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...