Millsy1969 Posted August 5, 2024 Share Posted August 5, 2024 Hi all. Looking new battery and several posts regarding size etc. The one I have is about 232 ish mm in length and the one I've seen is 278mm which has more Cranking Amps. The tray it sits on looks about 290mm. Will the higher CCA have any effect on the circuit load and does anyone know battery and tray size off hand. Don't want to strip it down yet until after service on fri. Thanks. Quote Link to comment Share on other sites More sharing options...
Chris M Posted August 18, 2024 Share Posted August 18, 2024 It is hard to get the perfect size as the clamp on the JDM cars is really small and the top of a lot of batteries wont fit, If you do go to halfords bring the clamp with you so you can test it. I just bought a UK clamp as that let me use a more nomal battery. Quote Link to comment Share on other sites More sharing options...
Chris M Posted August 18, 2024 Share Posted August 18, 2024 Here is the one I ended up buying: https://www.torqen.uk/nissan/350z/engine/electronics/37563-350z-nissan-oem-battery-bracket.html Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted August 19, 2024 Share Posted August 19, 2024 As has been said best to fit a UK battery and change the terminals and the clamping bracket and rods. Terminals, bracket and rods are all in stock and good to go same/next day. just drop me a pm if I can help you further. Quote Link to comment Share on other sites More sharing options...
Engin Posted November 26, 2024 Share Posted November 26, 2024 I got this one, perfect fit: https://www.tayna.co.uk/car-batteries/varta/b31/?gad_source=1&gclid=EAIaIQobChMIpMGd6-b6iQMVYJdQBh2gwwHXEAAYASAAEgLcGfD_BwE Quote Link to comment Share on other sites More sharing options...
Zalas Posted March 14 Share Posted March 14 (edited) 2k4 JDM owner here, just replaced. If you remove the tabs on the battery tray and trim the top of the battery clamp bar then you can fit some biggies! 630 cca plus 70AH S4026 Bosch Heavy Duty 068 Car Van Battery - 12V 70Ah trimmed base: battery nice snug fit and nicely nested in the car also take the time to derust and clean the battery scuttle and the drain beneath the ECU! Edited March 14 by Zalas Added battery specifics Quote Link to comment Share on other sites More sharing options...
Zalas Posted March 14 Share Posted March 14 On 18/08/2024 at 21:16, Chris M said: Here is the one I ended up buying: https://www.torqen.uk/nissan/350z/engine/electronics/37563-350z-nissan-oem-battery-bracket.html Can still trim those tabs down on the metal bracket to fit bigger batteries Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.