Mikey_S Posted April 25, 2021 Share Posted April 25, 2021 (edited) Hi all Since selling my Z, i have a few parts available for Sale, only looking to recoup what I paid and not rip anyone off. These parts were never installed (bar the relays) and are all intended for a DE/Rev-up 350. Exedy Clutch (OEM Replacement) - £210 (release bearing and 8x replacement bolts included) SOLD LUK Dual Mass Flywheel (OEM Replacement) - £250 SOLD BUNDLE: I would be willing to bundle it together for £350 COLLECTION: Due to the weight of the clutch and DMF I would prefer these to be collected (from Bristol or Swansea) or if you want to arrange a courier yourself to collect then I am also open to this. Tarmac Sportz clutch service Kit - £60 1 x HEL Performance Braided Clutch Hose- Transparent 1 x 500ml Motul RBF 600 Factory Line Racing Fully Synthetic DOT 4 Brake/Clutch Fluid 1 x Centric Clutch Slave Cylinder SOLD Also for sale Replacement dial covers (purchased from Zmanalex) - £25 (incl. Postage) Replacement headlight relays x 2 (purchased from Zmanalex) - £10 each (incl. Postage) Lastly - for free to a good home, a 350Z Haynes manual (no picture). Someone from the Forum passed this on to me for free bar a small donation to the forum to cover postage so I offer the same - CLAIMED Payment by cash or bank transfer. Please feel free to PM me any questions and also please let me know if there are any issues with my listing etc. Thanks Mike Edited September 13, 2021 by Mikey_S clutch and DMF sold Quote Link to comment Share on other sites More sharing options...
alan.aglaister Posted April 26, 2021 Share Posted April 26, 2021 Hi, What's the number on the flywheel I'm after a 12310JK20C Regards Alan Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted April 26, 2021 Author Share Posted April 26, 2021 Hi Alan This is a LUK manufactured Flywheel (415 0213 11) intended as a direct replacement for the OEM Nissan one. The Code above is a genuine Nissan flywheel (according to the internet) - https://nissangenuine.com/nissan/nissan-12310jk20c-flywheel-assy/ The following are shown when searched against the OEM comparison https://www.onlinecarparts.co.uk/oenumber/12310cd001.html However - I am in no way an expert in this field. I can only go by what I have found online and advice taken by this Forum when i went to purchase the part Thanks Mike Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted April 26, 2021 Share Posted April 26, 2021 1 hour ago, alan.aglaister said: Hi, What's the number on the flywheel I'm after a 12310JK20C Regards Alan That is the part number for an HR 350Z 1 Quote Link to comment Share on other sites More sharing options...
alan.aglaister Posted April 26, 2021 Share Posted April 26, 2021 Hi, Do you have one for sale? or do you know anyone that does? Kind Regards Alan Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted April 26, 2021 Share Posted April 26, 2021 35 minutes ago, alan.aglaister said: Hi, Do you have one for sale? or do you know anyone that does? Kind Regards Alan Yes, I have one for sale, I also have a complete clutch kit for an HR. Just drop me a PM so as to avoid hijacking Mike's for sale post. Quote Link to comment Share on other sites More sharing options...
sheikhhh10 Posted May 3, 2021 Share Posted May 3, 2021 Hi Mike. Is this all still available? I know you have said it's suitable for a DE/Revup - I have a non-revup DE, 2004 Reg 350z. Do you know if it'll be suitable? Cheers. Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted May 3, 2021 Author Share Posted May 3, 2021 Hey @sheikhhh10 yes, still available. PM me your reg and I'll run the part numbers to make sure. Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted May 3, 2021 Author Share Posted May 3, 2021 Hey @sheikhhh10 just to follow up, the clutch and flywheel are suitable for a DE. (Part numbers below? Exedy Clutch Kit (Plate, cover, release bearing and 8x OEM replacement bolts) Part no: NSK2168 LUK Dual Mass Flywheel Part no: 415 0213 11 The clutch salve cylinder though I'm not so sure. Tarmac have two options on their website (03-04) and (05-07) The one I have is (05-07). Not sure what the difference is, perhaps someone on here may be able to elaborate Thanks Mike Quote Link to comment Share on other sites More sharing options...
sheikhhh10 Posted May 5, 2021 Share Posted May 5, 2021 @ZMANALEX hey mate, I know I've messaged you already regarding a clutch kit but wanted to confirm that if the clutch slave cylinder for the 05/07 will fit an 04? Or are they different between the years? Cheers. @Mikey_S my reg is T8HHS, if you wouldn't mind running whatever checks you need and just confirm if that's OK? The main thing I need is the flywheel and clutch. I have asked Alex to check on Friday if he has any oem clutch kits and flywheels in stock and it'll likely come down to price but the exedy is really attracting me ngl! Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted May 6, 2021 Author Share Posted May 6, 2021 Hi @sheikhhh10 Exedy UK website confirms its suitable for a DE LUK manufacturer (Schhaeffler) also confirms suitability with a DE Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted May 13, 2021 Author Share Posted May 13, 2021 Bundle reduced - £480 Quote Link to comment Share on other sites More sharing options...
prodrive11 Posted June 2, 2021 Share Posted June 2, 2021 How much for the clutch service Kit posted ? Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted June 2, 2021 Author Share Posted June 2, 2021 Hey @prodrive11 if sent via Hermes then you'd be looking at £66 all in Cheers Mike Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted June 7, 2021 Author Share Posted June 7, 2021 Ad updated Quote Link to comment Share on other sites More sharing options...
Mikey_S Posted July 27, 2021 Author Share Posted July 27, 2021 Asking price reduced to £350 for the Clutch and Flywheel Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.0211d9682845584fa820c102367fa240.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.