ConnorP Posted October 17, 2020 Share Posted October 17, 2020 Hi all!, New to the forum and just picked up my first Z car this week, a 2006 350z with 39k miles! I'm new to the Z cars and will be glad of any help I can find here too! Just need to change over my reg, and get new wheels for it. Has anyone fitted Japan Racing JR11 alloys on their 350z? I have some questions about offset and clearances on the callipers! 1 Quote Link to comment Share on other sites More sharing options...
ShortPaul Posted October 18, 2020 Share Posted October 18, 2020 Hi and welcome 1 Quote Link to comment Share on other sites More sharing options...
Azurez33 Posted October 18, 2020 Share Posted October 18, 2020 Hello and welcome, if you venture into the modifications area of the forums and the wheels section has a massive topic on wheels and clearances 1 Quote Link to comment Share on other sites More sharing options...
ConnorP Posted October 18, 2020 Author Share Posted October 18, 2020 1 hour ago, Azurez33 said: Hello and welcome, if you venture into the modifications area of the forums and the wheels section has a massive topic on wheels and clearances I had a good look last night and almost found everything I needed, Thanks! Just the offset for rear wheels to figure out now 1 Quote Link to comment Share on other sites More sharing options...
Andy_Muxlow Posted October 18, 2020 Share Posted October 18, 2020 Hi and welcome along buddy. My 350z vert has jr11 the tears were 18x10.5 et22 I think if you look at my build thread for her I am sure I put it on there 1 Quote Link to comment Share on other sites More sharing options...
ConnorP Posted October 21, 2020 Author Share Posted October 21, 2020 On 18/10/2020 at 18:33, Andy_Muxlow said: Hi and welcome along buddy. My 350z vert has jr11 the tears were 18x10.5 et22 I think if you look at my build thread for her I am sure I put it on there Perfect! Thank you for the info, that's the same sizes as I am looking at doing but probably going for the bronze versions of them. The current wheels are 19s and the fronts have been spaced about 20mm and they just clear the callipers, so I'm not too happy with them so less spacing will be great. I had a 2016 polo GTi before this and it was the worst car I've owned, had this 350z a week today and already looking at getting a 370z nismo too. Quote Link to comment Share on other sites More sharing options...
da.murf Posted October 21, 2020 Share Posted October 21, 2020 Hi and welcome to the club! Great to see another NI member based just outside belfast myself 1 Quote Link to comment Share on other sites More sharing options...
Stutopia Posted October 22, 2020 Share Posted October 22, 2020 along 1 Quote Link to comment Share on other sites More sharing options...
Andy_Muxlow Posted October 22, 2020 Share Posted October 22, 2020 On 21/10/2020 at 19:31, ConnorP said: Perfect! Thank you for the info, that's the same sizes as I am looking at doing but probably going for the bronze versions of them. The current wheels are 19s and the fronts have been spaced about 20mm and they just clear the callipers, so I'm not too happy with them so less spacing will be great. I had a 2016 polo GTi before this and it was the worst car I've owned, had this 350z a week today and already looking at getting a 370z nismo too. My JR11's did require a 5mm shim spacer to avoid the callipers. 1 Quote Link to comment Share on other sites More sharing options...
ConnorP Posted November 19, 2020 Author Share Posted November 19, 2020 On 21/10/2020 at 21:29, da.murf said: Hi and welcome to the club! Great to see another NI member based just outside belfast myself Same here, I've seen a silver 350z just down from my work too in Carrick! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.