Innes Drummond Posted June 26, 2020 Share Posted June 26, 2020 Hello can someone help the fixings from under the brace for my boot divider have come away and I can't seem to get them to go back in any help would be great cheers Quote Link to comment Share on other sites More sharing options...
zelda Posted June 26, 2020 Share Posted June 26, 2020 Did your boot divider come installed from the factory? I bought an OEM divider to fit my DE but my car didnt have the fixings in the strut tower. I've tried twice to buy some fixings that were recommended on the forum but they were no good. I ended up buying an aftermarket one from a trader on the forum and the fitment was perfect. Quote Link to comment Share on other sites More sharing options...
Innes Drummond Posted June 26, 2020 Author Share Posted June 26, 2020 Think it's factory I only got my z a few weeks ago ....did you have holes under the strut to put fixings in ? Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted June 26, 2020 Share Posted June 26, 2020 These work; https://www.ebay.co.uk/itm/361830776095 Quote Link to comment Share on other sites More sharing options...
zelda Posted June 26, 2020 Share Posted June 26, 2020 I have the holes in the strut tower but nothing in them for the screws to thread onto. I bought the fittings ZMANALEX recommended (cant remember if it was the same ebay seller) and they were useless. Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted June 26, 2020 Share Posted June 26, 2020 15 minutes ago, zelda said: I have the holes in the strut tower but nothing in them for the screws to thread onto. I bought the fittings ZMANALEX recommended (cant remember if it was the same ebay seller) and they were useless. They work for me, perhaps you used the wrong size? I will have a look in the shop tomorrow and confirm the correct size if I have any left. Quote Link to comment Share on other sites More sharing options...
zelda Posted June 26, 2020 Share Posted June 26, 2020 Be great if you could check size. I tried 2 different sizes without success. I'll see if I can find out which sizes I bought. Pretty sure I have them in the garage still. Quote Link to comment Share on other sites More sharing options...
Innes Drummond Posted June 27, 2020 Author Share Posted June 27, 2020 This would be great I ordered ones of ebay think it was m4 x11 0-2 grip Quote Link to comment Share on other sites More sharing options...
Innes Drummond Posted June 27, 2020 Author Share Posted June 27, 2020 also do these go in with the lip inside the strut tower ? Quote Link to comment Share on other sites More sharing options...
Innes Drummond Posted June 27, 2020 Author Share Posted June 27, 2020 6 hours ago, ZMANALEX said: These work; https://www.ebay.co.uk/itm/361830776095 Do you use these with the wee white spacer on the existing or just screw bracket straight to it ? cheers Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted June 27, 2020 Share Posted June 27, 2020 2 hours ago, Innes Drummond said: Do you use these with the wee white spacer on the existing or just screw bracket straight to it ? cheers Use a spacer if you have a recess. Quote Link to comment Share on other sites More sharing options...
zelda Posted June 27, 2020 Share Posted June 27, 2020 I just checked my last order and it was the same ebay store. Size M4 x 11mm (grip 0-2mm) and they didnt work for me at least. Post back and let us know how you get on with your set. Quote Link to comment Share on other sites More sharing options...
Ben–350Z Posted June 28, 2020 Share Posted June 28, 2020 I used those rubber things on mine, too. IIRC had to use a small flat blade screwdriver to stop them spinning at first. Quote Link to comment Share on other sites More sharing options...
Innes Drummond Posted June 30, 2020 Author Share Posted June 30, 2020 On 26/06/2020 at 22:32, ZMANALEX said: These work; https://www.ebay.co.uk/itm/361830776095 Hello one worked and one failed ....should I try to push the fixing into the spacer first ? or just place in front then thread the bolt through? thanks Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted June 30, 2020 Share Posted June 30, 2020 This is how I fit them: https://www.google.co.uk/search?source=hp&ei=7RUCXrXTCMLkgweY176ABw&q=how+to+fit+a+rubber+well+nut&btnK=Google+Search#btnK=Google Search&kpvalbx=_Mm_7Xsi3FK2j1fAPuq-jcA32 Quote Link to comment Share on other sites More sharing options...
Innes Drummond Posted June 30, 2020 Author Share Posted June 30, 2020 excellent m8 so smaller diameter in first thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.