coldel Posted February 24, 2020 Share Posted February 24, 2020 That fuse box 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted February 24, 2020 Author Share Posted February 24, 2020 18 minutes ago, coldel said: That fuse box yep, she wasn't in good shape but an 30 min session with a dremel steel brush, some contact cleaner, new fuses and shes all good. 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted February 27, 2020 Author Share Posted February 27, 2020 (edited) Found myself some original watnabes in the very hard to find right size, 114.3 pcd and in 14's with right offset. Had them refurbed this week and collecting them Sunday for fitting next week before she heads off for a week to have her coilovers and suspension set up all fitted. Edited February 27, 2020 by Payco 7 Quote Link to comment Share on other sites More sharing options...
coldel Posted February 27, 2020 Share Posted February 27, 2020 They will look ace 1 Quote Link to comment Share on other sites More sharing options...
Andy_Muxlow Posted February 27, 2020 Share Posted February 27, 2020 Wow. Very nice indeed Martin. 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted March 2, 2020 Author Share Posted March 2, 2020 (edited) New radiator went in Sat. Collected new rims Sunday for fitting with coil overs next week. Out with the old and in with the new..Engine bay is slowly coming up to scratch. Also got rid of the unnecessary and ugly over flow tank which shouldn't have been there. Edited March 2, 2020 by Payco 3 Quote Link to comment Share on other sites More sharing options...
Andy_Muxlow Posted March 2, 2020 Share Posted March 2, 2020 She is coming along nicely Martin. 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted March 8, 2020 Author Share Posted March 8, 2020 Small update. Delivered her to Herne Bay yesterday on her new rims for the coilovers to be fitted. Have to say the 2.5 hour drive was so much fun. Surprised I didn’t cause an accident as so many people glanced over at her. Photo of her on the new rims in the workshop. 5 Quote Link to comment Share on other sites More sharing options...
coldel Posted March 9, 2020 Share Posted March 9, 2020 Might be worth putting making your car E10 proof on your list of things to do mate Quote Link to comment Share on other sites More sharing options...
Mike k-g Posted March 9, 2020 Share Posted March 9, 2020 Not really a classic car fan but do like yours payco everything looks so easy to work on. Mike k-g Quote Link to comment Share on other sites More sharing options...
Payco Posted March 10, 2020 Author Share Posted March 10, 2020 13 hours ago, Mike k-g said: Not really a classic car fan but do like yours payco everything looks so easy to work on. Mike k-g Thanks. Only registered SSS in the UK which I have had confirmed. Quote Link to comment Share on other sites More sharing options...
Payco Posted March 13, 2020 Author Share Posted March 13, 2020 (edited) Front coilys built and ready to go on. Edited March 13, 2020 by Payco 3 Quote Link to comment Share on other sites More sharing options...
Andy_Muxlow Posted March 13, 2020 Share Posted March 13, 2020 Nice! 1 Quote Link to comment Share on other sites More sharing options...
DoogyRev Posted March 14, 2020 Share Posted March 14, 2020 saw this the other day and thought of you . . . https://www.carscoops.com/2020/03/can-this-1969-nissan-skyline-2000-gt-r-sway-you-away-from-a-modern-godzilla/ 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted March 14, 2020 Author Share Posted March 14, 2020 11 hours ago, DoogyRev said: saw this the other day and thought of you . . . https://www.carscoops.com/2020/03/can-this-1969-nissan-skyline-2000-gt-r-sway-you-away-from-a-modern-godzilla/ Yep, saw it too. Nice bit of kit. Thanks for sharing. 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted April 1, 2020 Author Share Posted April 1, 2020 (edited) Just a little progress given lockdown etc. Got the suspension on now and we are just getting the height we want on the coilovers. Going to bring her down a small amount at the back and up a little at the front. Will share more when she is where we want her. Edited April 1, 2020 by Payco 3 Quote Link to comment Share on other sites More sharing options...
Payco Posted May 1, 2020 Author Share Posted May 1, 2020 (edited) Hoping to pick the car back up from Herne Bay in a few weeks or have it delivered. Could have been doing so much if I had her here with me. Been busy buying a few parts one of which has been near impossible to source. After a long hunt I found an original fuse box in Japan which arrived today. Nothing wrong with my current one but it does have a burn rash on the lid and a bolt rather than the plug in the middle of the lid. Anyone who knows me understands how fussy I am about trying to get things exactly as I want them or how they should be. New replacement below, Much more to follow when she's back with me. In other news, going to have a full bare metal re-spray in 2022 in her orginal colour. below video is the colour and a great example. Edited May 1, 2020 by Payco 3 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted May 14, 2020 Author Share Posted May 14, 2020 (edited) the restoration project is now resumed. Currently the carbs and associated hardware is being rebuilt as on inspection there are a few signs of wear in her 49 years of being in this world. Gaskets were shot so new ones have been made from gasket corking as originals are near impossible to source. Also had to put a new copper float in the rear carb as she had become porous. They are all refreshed and going back on with new fuel pipes and clips. Lastly, added a new fuel filter. Edited May 14, 2020 by Payco 6 Quote Link to comment Share on other sites More sharing options...
andy james Posted May 14, 2020 Share Posted May 14, 2020 Looking good Martin. The temptation to polish those dash tops would be eating me!! Lol 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted May 15, 2020 Author Share Posted May 15, 2020 Thanks Andy. Don't worry all in hand and in good time. Hope we can catch up later this year. Martin Quote Link to comment Share on other sites More sharing options...
Payco Posted May 27, 2020 Author Share Posted May 27, 2020 (edited) Hi all. A lot has happened in the short time she has been back with me having been locked down having her suspension fitted since 18th March. She now sits much better on her coilovers. First up was to give her a good clean, polish the original and rare watanabe rims and dress the tyres. Next was to polish the wing mirrors mounted on her bonnet. Followed this little job with a refurb of the grill and then fitted my SSS badge. Swapped out the standard airbox for some conical filters and added the required breather filter. Removed the tatty petrol tank cover in the trunk and carpeted it. Next job was to template a new back plate to the trunk which I will also cover along with making a new boot floor plan and carpeting that too. Will let you follow the photos in order of the above. More to follow over the coming days and weeks. Hope everyone remains safe and well. Edited May 28, 2020 by Payco 6 Quote Link to comment Share on other sites More sharing options...
Stutopia Posted May 28, 2020 Share Posted May 28, 2020 Really nice this project Martin, love it. 1 Quote Link to comment Share on other sites More sharing options...
coldel Posted May 28, 2020 Share Posted May 28, 2020 Blue hoses! Quote Link to comment Share on other sites More sharing options...
Payco Posted May 28, 2020 Author Share Posted May 28, 2020 (edited) Plug leads you mean Col ?. Will be getting black in good time mate. Edited May 28, 2020 by Payco 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted June 2, 2020 Author Share Posted June 2, 2020 (edited) So next up is refurbishing the rear light clusters. They will be repainted and re chromed but as always with older cars it isn't that simple. Removed the units and opened them up to clean but 50 years of being on this planet has meant the rubber internal gaskets are all dried out and rotten. Have ordered some self adhesive 2mm/5mm draft excluder rubber to make my own replacements. Lights are now out ready to drop off Saturday along with my rear quarter badges and front light surrounds. Replacing current rear bulbs with plug and play LEDs. Edited June 2, 2020 by Payco 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.