Richn370 Posted June 21, 2019 Share Posted June 21, 2019 What do you think people, obviously be done properly Quote Link to comment Share on other sites More sharing options...
G1en Posted June 21, 2019 Share Posted June 21, 2019 Would be ok for shows but unless you drive without ever touching the brake pedal they will be covered with brake dust and general road spray in no time. Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 21, 2019 Author Share Posted June 21, 2019 23 minutes ago, G1en@waxandshine said: Would be ok for shows but unless you drive without ever touching the brake pedal they will be covered with brake dust and general road spray in no time. See your point, the car is not a daily driver as got another car and is always clean but brake dust could be a problem! Quote Link to comment Share on other sites More sharing options...
HEADPHONES Posted June 21, 2019 Share Posted June 21, 2019 Not seen anything like that before! Would look good I reckon on a black on black beast. Wouldn't work on rims with thicker spokes but you got nothing to lose as I assume they'd be dead easy to remove Quote Link to comment Share on other sites More sharing options...
ShortPaul Posted June 21, 2019 Share Posted June 21, 2019 Being honest, sorry but not for me buddy Quote Link to comment Share on other sites More sharing options...
LRF4N Posted June 21, 2019 Share Posted June 21, 2019 Depends on the car/wheels/sticker. That looks naff but it can work Would look better on a wide dish Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 21, 2019 Author Share Posted June 21, 2019 It would be on that wheel jr21x11 so quite wide plus it would be done properly not letters I just cut out Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 21, 2019 Author Share Posted June 21, 2019 42 minutes ago, ShortPaul said: Being honest, sorry but not for me buddy Fair do but something different Quote Link to comment Share on other sites More sharing options...
Ekona Posted June 21, 2019 Share Posted June 21, 2019 NO NO NO NO NO NO 2 Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted June 22, 2019 Share Posted June 22, 2019 I think Dan's a fan... 2 1 Quote Link to comment Share on other sites More sharing options...
LRF4N Posted June 22, 2019 Share Posted June 22, 2019 11 hours ago, Richn370 said: It would be on that wheel jr21x11 so quite wide plus it would be done properly not letters I just cut out I meant on the outside of the wheel not behind the spokes 1 Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 22, 2019 Author Share Posted June 22, 2019 Get the feeling people not liking it Quote Link to comment Share on other sites More sharing options...
marzman Posted June 22, 2019 Share Posted June 22, 2019 I like it. Not seen it before. It would look good on the right car with the right mods. 1 Quote Link to comment Share on other sites More sharing options...
LRF4N Posted June 22, 2019 Share Posted June 22, 2019 This On a standard car with aftermarket wheels, or a clean modified car it would look wrong. Saw it on a drift car and it worked, can’t find pics 1 Quote Link to comment Share on other sites More sharing options...
London350 Posted June 22, 2019 Share Posted June 22, 2019 Seen it done on drift cars. I think it could work well if done right. My last R32 (drift car) had the inners painted lime green like the body colour with the black spoke/dish. Lots of people didn't like it but I did. If you like it that's what counts. Go for it and see how they look fitted. worst case you can take them off and remove the design Quote Link to comment Share on other sites More sharing options...
ShortPaul Posted June 22, 2019 Share Posted June 22, 2019 4 hours ago, London350 said: Seen it done on drift cars. I think it could work well if done right. My last R32 (drift car) had the inners painted lime green like the body colour with the black spoke/dish. Lots of people didn't like it but I did. If you like it that's what counts. Go for it and see how they look fitted. worst case you can take them off and remove the design Go for it, every one has different ideas things would be boring if everyone done the same things Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 22, 2019 Author Share Posted June 22, 2019 1 hour ago, ShortPaul said: Go for it, every one has different ideas things would be boring if everyone done the same things Think I'm gonna go for it, I post pics to see what u guys think of it. 1 Quote Link to comment Share on other sites More sharing options...
Payco Posted June 22, 2019 Share Posted June 22, 2019 17 hours ago, Ekona said: NO NO NO NO NO NO 100% with Dan on this one. Definitely a NO from me. Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 22, 2019 Author Share Posted June 22, 2019 22 minutes ago, Payco said: 100% with Dan on this one. Definitely a NO from me. So that's a no from you and Dan then Quote Link to comment Share on other sites More sharing options...
Payco Posted June 22, 2019 Share Posted June 22, 2019 (edited) 2 hours ago, Richn370 said: So that's a no from you and Dan then It is buddy but it’s about what you want to do and not what others would do. Edited June 22, 2019 by Payco Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 22, 2019 Author Share Posted June 22, 2019 3 minutes ago, Payco said: It is buddy but it’s about what you want to do and not what others would do. Thanks for your input though I'm stuck in the middle it would be something different Quote Link to comment Share on other sites More sharing options...
Kieran O'Quick Posted June 22, 2019 Share Posted June 22, 2019 It looks pretty cool apart from the word Nissan... How about RAYS ? Or Nismo, Zed... 1 Quote Link to comment Share on other sites More sharing options...
ShortPaul Posted June 22, 2019 Share Posted June 22, 2019 At the end of the day it's only stickers if it looks pants then it won't be a problem to remove 1 Quote Link to comment Share on other sites More sharing options...
LRF4N Posted June 22, 2019 Share Posted June 22, 2019 Behind the spokes is a no for me. If you don’t have deep dish wheels I’d give it a miss 1 Quote Link to comment Share on other sites More sharing options...
Richn370 Posted June 22, 2019 Author Share Posted June 22, 2019 45 minutes ago, LRF4N said: Behind the spokes is a no for me. If you don’t have deep dish wheels I’d give it a miss Think my mock ups look better Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.