Ortega_9 Posted December 11, 2018 Share Posted December 11, 2018 Hi, i have a little problem with the Grip on my falken 275/35/19 when dooing some straight Line Racing. Anyone have experience with some Sticky street tyres, r888, nitto etc. Any advice before plunging in.? I'm thinking some 17x10 ish wheels and some 265-305 wide tyres to go with it. Quote Link to comment Share on other sites More sharing options...
Ekona Posted December 11, 2018 Share Posted December 11, 2018 What tyres are you using now? What power levels are you at? And how much do you hate your drivetrain? But yes, if you're only on regular tyres then any semi-slick will massively improve your launches. Proper slicks even more so, but they take a little more effort to get right. Quote Link to comment Share on other sites More sharing options...
Kieran O'Quick Posted December 11, 2018 Share Posted December 11, 2018 (edited) I've run R888r and Nankang AR1. Very similar and both way grippier than a sporty road tyre. The 888r for me was 1.7 seconds quicker than mpss over a 66 second lap with a standing start. Between the two, I'd say the 888 worked better from cold than the Nankang. They're both OK in the wet but I have to say I haven't hit any big puddles in them ever. The quickest reasonably priced Road legal tyre would probably be the Extreme vr2 soft compound. They are now the top choice for sprints and hills They really are for short bursts though. Very track focused. Not a daily tyre Edited December 11, 2018 by Kieran O'Quick Quote Link to comment Share on other sites More sharing options...
docwra Posted December 11, 2018 Share Posted December 11, 2018 They will be even worse when cold or if its wet as well, have you sorted out your alignment? If youre proper dragging you cant beat drag radials ...... Quote Link to comment Share on other sites More sharing options...
Jetpilot Posted December 11, 2018 Share Posted December 11, 2018 I ran a few different set ups on my supercharged zed @ 400hp and never struggled for grip on 275 rear, except on the wet days, are we talking from a standing start or rolling? Quote Link to comment Share on other sites More sharing options...
Ortega_9 Posted December 11, 2018 Author Share Posted December 11, 2018 The car is a tt 350z about 500 horse, dead 0 camber rear and full launch control with aem ecu. with this set of tyres it will be all about 1/8 mile drag. Quote Link to comment Share on other sites More sharing options...
Ekona Posted December 11, 2018 Share Posted December 11, 2018 Slicks it is then. Pointless running anything less. 1 Quote Link to comment Share on other sites More sharing options...
Ortega_9 Posted December 12, 2018 Author Share Posted December 12, 2018 (edited) I do need to mention that it's on street tracks. I was hoping to be able to drive to and from on the rear set. It's still a street car. would something like the M/T street do the job? Edited December 12, 2018 by Ortega_9 Quote Link to comment Share on other sites More sharing options...
Kieran O'Quick Posted December 12, 2018 Share Posted December 12, 2018 Not familiar with those. They're not the Motorsport UK approved lists. The sport version looks good in the pictures though. Quite a bit more thread than some track tyres maybe? I've driven 200 miles to a venue on the 888r, did 7 sprints and drove home with no problems. They're a little noisier is all. 1 Quote Link to comment Share on other sites More sharing options...
Ortega_9 Posted December 12, 2018 Author Share Posted December 12, 2018 3 hours ago, Kieran O'Quick said: Not familiar with those. They're not the Motorsport UK approved lists. The sport version looks good in the pictures though. Quite a bit more thread than some track tyres maybe? I've driven 200 miles to a venue on the 888r, did 7 sprints and drove home with no problems. They're a little noisier is all. Ok. The 888r also looks the part I Think I might give them a go. thanks Quote Link to comment Share on other sites More sharing options...
Jetpilot Posted December 12, 2018 Share Posted December 12, 2018 Personally i wouldnt waste the extra expense on 888's just for the drag/street strip, just go nankang ar1's. Quote Link to comment Share on other sites More sharing options...
StevoD Posted December 12, 2018 Share Posted December 12, 2018 is straight line racing drag racing? If so surely road legal drag slicks are the answer? Quote Link to comment Share on other sites More sharing options...
Kieran O'Quick Posted December 12, 2018 Share Posted December 12, 2018 Yep, thinking about it, it's probably worth checking out what the drag community go with. Good track tyres, 888s, AR1, etc have pretty stiff sidewalls which could be a disadvantage on the launch? Quote Link to comment Share on other sites More sharing options...
Ekona Posted December 12, 2018 Share Posted December 12, 2018 Lower the pressures to compensate? Quote Link to comment Share on other sites More sharing options...
Ortega_9 Posted December 13, 2018 Author Share Posted December 13, 2018 (edited) The issue beeing they need to be Road legal. otherwise full Slicks is a no brainer. i'm going from my everyday 19" rear wheel to a 17" to clear rear brembo, and to get some higher sidewall for lauching, but i have no idea if it's enough, and if the sidewall is too stiff on a street tire. Edited December 13, 2018 by Ortega_9 Quote Link to comment Share on other sites More sharing options...
StevoD Posted December 13, 2018 Share Posted December 13, 2018 (edited) 20 hours ago, Ekona said: Lower the pressures to compensate? never have the softness you need for drag racing im sure there are road legal drag slicks in the UK as there is a series in the UK which requires cars to drive on the road before they can run Edited December 13, 2018 by StevoD Quote Link to comment Share on other sites More sharing options...
Ortega_9 Posted December 14, 2018 Author Share Posted December 14, 2018 My tire pusher Said that the only Way to go with thoose requirements are M/T et street 275/40-17. Ø 26.1. otherwise I'll have tires to wide for the wheels, to hard on the sides or to track oriented. So I Think I'll have to at least give them a go. Pricewise it's about the same as pair of r888r. now i need to source a pair of 9-10" wide 17".... and an extra set of rear drive shafts just in case. Quote Link to comment Share on other sites More sharing options...
Kieran O'Quick Posted December 14, 2018 Share Posted December 14, 2018 Good thinking ahead with the drive shafts. Will be interesting to see how you get on. Quote Link to comment Share on other sites More sharing options...
Ortega_9 Posted December 14, 2018 Author Share Posted December 14, 2018 2 hours ago, Kieran O'Quick said: Good thinking ahead with the drive shafts. Will be interesting to see how you get on. Ofcourse hoping that it wont be needed... but no need to be naive.... And when driving to and from events in the car it's worth having a set in the trunk Anyways. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.