hairyman68 Posted May 10, 2018 Share Posted May 10, 2018 Hi this may have been asked before but whats involved in removing the seats to get re trimmed..? Quote Link to comment Share on other sites More sharing options...
Stutopia Posted May 10, 2018 Share Posted May 10, 2018 Big nuts. In the floor. Also disconnect your air bags and heating, yellow tab underneath IIRC. Be careful, you probably should disconnect battery first for the air bags and pump the brakes a few times. They're heavy AF, remember to get them in position to come out whilst the electric is still on! Quote Link to comment Share on other sites More sharing options...
Mondo 300 Posted May 11, 2018 Share Posted May 11, 2018 My rule of thumb is to remove the four bolts before pulling the battery. Once they're removed, position the seat back in the centre of the runner travel and then disconnect the battery earth lead. Wait 15 minutes, then tilt the seats backwards and disconnect the relevant clips and plugs. In the very best Haynes manual tradition, refitting is the reverse of removal! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.