Geo92 Posted April 9, 2017 Share Posted April 9, 2017 (edited) Good Afternoon All, After some deliberation, initiated by receiving my next deployment notice(s) meaning I will essentially be out of the country until Aug 18... I am testing the water with these items. It's kind of two fold; one to enable cash flow in the near future to start collating parts (*Dont tell the wife* ... LSx swap), two: to free up some space in my garage to store said parts! The majority of the part are essentially new with just run in miles on them. Pictures are all here: http://s86.photobuck...r/George_Hag92/ I will edit this post to embed pics - I did have all of this typed out with pics embedded and accidentally clicked a link and hey presto i lost it all!... -.- Greddy Twin Turbo 18g TD05 Kit and Assoc. £4000 As standard the Greddy TT kit does not fit the uk 350z which is a great shame. With the modified downpipe, LHD started motor and the custom engine mounts this kit will clear the steering shaft. ​Exhaust Manifolds Greddy TD05 18g Turbos (Covered 100 miles at most) Oil feed lines and adapters 1 x Greddy pre-downpipe with W/G port delete 1 x Custom pre-downpipe with V-Band Motordyne ARTS test pipes (1 modified for v-band attachment) Custom wastegate relocation kit UpRev GT MAF LHD Starter Motor Turbo Intake piping Turbo-IC Boost Piping Other Bits Eagle Rods, Wiesco 96mm 8.8:1 Pistons (No rings) ARP Studs - £600 Cosworth Heads - £1000 HKS Cams - £350 Cosworth Intake Manifold (Polished) - £450 http://www.vipmotors...Intake-Manifold Oil Pan Spacer (With oil return holes drilled and blank deletes) - £50 https://www.torqen.u...3503-pansp.html TB Spacer - £50 http://www.350z-uk.c...ir-intake-kits/ ID Injectors 725cc - £450 https://www.torqen.u...7254814146.html AAM Stage 1 Fuel Return Kit - £450 https://www.torqen.u...5fs-frsbfr.html Exedy Twin Plate Carbon Clutch - £500 https://www.torqen.u...nm072sdmc1.html Edited April 9, 2017 by Geo92 Quote Link to comment Share on other sites More sharing options...
evilscorp Posted April 9, 2017 Share Posted April 9, 2017 Dibs on the cosworth manifold. Quote Link to comment Share on other sites More sharing options...
LDUNKZ18 Posted April 9, 2017 Share Posted April 9, 2017 pm'd you Quote Link to comment Share on other sites More sharing options...
WhopperSenior Posted April 10, 2017 Share Posted April 10, 2017 There are some real treats in here. GLWS Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted April 10, 2017 Share Posted April 10, 2017 (edited) I have the Cosworth plenum if Evilscorp changes his mind. Can we have a deal on the heads? Edited April 10, 2017 by Mark@Abbey m/s Quote Link to comment Share on other sites More sharing options...
LDUNKZ18 Posted April 10, 2017 Share Posted April 10, 2017 Does it work on dibs??? Surely its first to pay? Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted April 10, 2017 Share Posted April 10, 2017 I think we should let the 1st person that wanted the item have 1st refusal. Quote Link to comment Share on other sites More sharing options...
LDUNKZ18 Posted April 10, 2017 Share Posted April 10, 2017 Surely its whoever can pay first but id say thats up to the seller on how soon he needs the money. 3rd dibs on manifold though just to cover my ar*e. Quote Link to comment Share on other sites More sharing options...
The Chubby Ninja Posted April 10, 2017 Share Posted April 10, 2017 What duration are the cams? Quote Link to comment Share on other sites More sharing options...
Geo92 Posted April 10, 2017 Author Share Posted April 10, 2017 As per a few PM's I've received, incidentally all about the Intake Manifold... Please see below for some more pics. Apologies If I didn't make it explicitly clear in the first post; I'm not interested in selling just one or two of the items and ending up with the majority left; I'm really aiming for the bigger items to be sold/wanted before I let the smaller ones go. If they don't sell I will just have the block machined and rebuild it myself and shelf the LSx plans for another car. Obviously the pics don't do it justice as I haven't even wiped off the dust let alone given it a quick polish. 1 Quote Link to comment Share on other sites More sharing options...
Conlonl Posted April 10, 2017 Share Posted April 10, 2017 whats the reccommended flywheel for that clutch? Quote Link to comment Share on other sites More sharing options...
The Chubby Ninja Posted April 10, 2017 Share Posted April 10, 2017 Any info on the cams? Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted April 10, 2017 Share Posted April 10, 2017 George, I am interested in the whole lot including engine loom and ECU. I can also do a good deal/swop for a LSX motor. I am away on holiday this week , seen me a PM we can have a chat via PM or a chat when I am back later this week. Quote Link to comment Share on other sites More sharing options...
evilscorp Posted April 10, 2017 Share Posted April 10, 2017 When you decide what you want to do the money is here waiting, and LDUNKZ18, YES that is how the forum works. 2 Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted April 10, 2017 Share Posted April 10, 2017 Cams are 264 specs are here Thanks Quote Link to comment Share on other sites More sharing options...
LDUNKZ18 Posted April 10, 2017 Share Posted April 10, 2017 Didn't realise it worked on first dibs. I'll know in the future Quote Link to comment Share on other sites More sharing options...
evilscorp Posted April 10, 2017 Share Posted April 10, 2017 (edited) no problem, otherwise you would have multiple people throwing money at someone only for them to run away with it all.... not that I believe anyone on this great site would do that. I also understand the op would prefer to sell it as a job lot to save hassle... even if it is to a trader Edited April 10, 2017 by evilscorp 2 Quote Link to comment Share on other sites More sharing options...
Marko123 Posted April 11, 2017 Share Posted April 11, 2017 In the (unlikely) event that the manifold doesn't sell 4th dibs on the manifold please and 2nd on the heads (if Mark changes his mind) Quote Link to comment Share on other sites More sharing options...
Carbon.Ninja Posted April 14, 2017 Share Posted April 14, 2017 1st dip on cams Sent from my Nexus 6 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Geo92 Posted April 22, 2017 Author Share Posted April 22, 2017 Thanks everybody for the interest and messages! As it stands I am in talks with Mark @ Abby for a combined sale for everything. Should this not work for whatever reason, and somebody decide to buy the turbo kit. I will honour the interest list as per who asked first for the items! Any more questions please let me know. 1 Quote Link to comment Share on other sites More sharing options...
evilscorp Posted April 22, 2017 Share Posted April 22, 2017 whats the reccommended flywheel for that clutch? Flywheel is part of the clutch, look at the toothed grey section 1 Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted April 22, 2017 Share Posted April 22, 2017 I am away in Ireland for IDC Rd1. I do need to reply to George email which I will do on Monday. Thanks Quote Link to comment Share on other sites More sharing options...
Explodedparrot Posted April 23, 2017 Share Posted April 23, 2017 If the throttle body spacer hasn't sold I'll put it if you'll post I'll pm you! Quote Link to comment Share on other sites More sharing options...
Conlonl Posted April 24, 2017 Share Posted April 24, 2017 is the clutch still for sale? Quote Link to comment Share on other sites More sharing options...
wizard Posted May 17, 2017 Share Posted May 17, 2017 Hi - have you sold everything? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.